search

iNavFlight / OpenTX-Telemetry-Widget

INAV Lua Telemetry with support for EdgeTX
https://luatelemetry.readthedocs.io/en/latest/
GNU General Public License v3.0
156 stars 32 forks source link

Horusx12s EDGE TX no Menu vers. 2.2.3 #125

Closed uwe-air closed 7 months ago

uwe-air commented 10 months ago

Hi i have the problem that i cant get in to the menu by moving the stick.

I use the version widget version 2.2.3 and edgetx 2.9.0

i went to the screen with the widget and the RF module is OFF than i moved the left stick to the right corner -> Nothing i tried that than with all possible variations on the Left and Right Stick -> nothing

This : https://luatelemetry.readthedocs.io/en/latest/Configuration-Settings/ Horus/Jumper T16 Must be unarmed to access the config menu when running as a widget Use the following (mode 2) stick controls to navigate the config menu: sample .......is is not working somehow.

The widget it self works fine with the sensors movement etc I hope you can help me out

packetpilot commented 7 months ago

Does holding the "model" button not bring up the menu while the widget is running?

stronnag commented 7 months ago

Using the stick works correctly in the Companion, as documented. If the hardware does not work the same as Companion, please seek the assistance of the firmware developers or radio manufacturer.

uwe-air commented 3 months ago

Hi Model Mode must be 1, (if you use 2,3,4 you need to change just for the setup, than bring the former throtle stick to the center and move the Left on up right.

Solved