search

iNavFlight / OpenTX-Telemetry-Widget

INAV Lua Telemetry with support for EdgeTX
https://luatelemetry.readthedocs.io/en/latest/
GNU General Public License v3.0
156 stars 32 forks source link

Why do admins close issues without any explaination? #143

Closed packetkiller closed 4 months ago

packetkiller commented 4 months ago

Why would an admin close or even mark this issue as duplicate without explanation or evidence this is something NOT related to the iNAV telemetry widget?

Wonderful tool but not making it easy to show an issue and get help with it when things not working as expected.

This is not asking how to fix the below but how to submit an issue and get a reasonable response that leads to some direction where action can be taken (like...this looks to be an iNAV firmware issue, or this looks like an iNAV configuration issue, or this looks like an EdgeTX issue, or anything other than, "The widget is an AHI; the behaviour is correct." and then just close the issue).

Issue #142

Describe the bug The iNAV Telemetry Widget is displaying the attitude indicator graphic roll in reverse (left roll is right roll and right roll is left roll).

TX = RadioMaster TX16S TX Firmware = 6.17 EdgeTX ver = 2.9.3 "Providence" RX = TBS Crossfire Diversity Nano RX Firmware = 6.17 Telemetry Protocol = Crossfire Flight Controller = Lumenier LUX-H7 HD Flight Controller FC Firmware = iNAV 7.0.1 with inav_7.1.0_MATEKH743.hex

To reproduce Turn on all electronics (TX, VRX, Battery connected to aircraft) While looking at the aircraft from the rear (the aircraft pointing away from you in the direction it would normally fly), lower the left wing (simulate a left roll). Look at the iNAV Telemetry Widget on the TX and notice the roll graphic depicts a right roll. Repeat for right roll. Again, look at iNAV Telemetry Widget on the TX and notice the roll graphic depicts a left roll. Note, all telemetry data indicates good values with the exception of the reversed roll attitude indicator graphic. Expected behavior An aircraft left roll is expected to show a left roll in the iNAV Telemetry Widget. Same for right roll.

Screenshots See attached files for left and right roll with iNAV Telemetry Widget showing reverse roll in attitude indicator graphic.

Radio and model settings The model name is Opticopter1. Note: the other model using the same TX (an ARPro1) now also displays incorrectly in the iNAV Widget since iNAV upgrade to 7.1.0. Attached is the .dat and EdgeTX .etx settings backup files and other log files.

Additional context Also provided is a copy of the iNAV config settings for Opticopter1. TX_LOGS_Opticopter2-2024-04-15-134032.zip FC_LOGS.zip

stronnag commented 4 months ago

See documentation. This is an AHI.