search

iNavFlight / OpenTX-Telemetry-Widget

INAV Lua Telemetry with support for EdgeTX
https://luatelemetry.readthedocs.io/en/latest/
GNU General Public License v3.0
156 stars 32 forks source link

Jumper T15 - Emergency Mode when selecting iNav widget in telemetry setup #154

Closed dingrgh closed 1 month ago

dingrgh commented 1 month ago

Description

Jumper T15 (480x320 colour touch screen) EdgeTX 2.10.2 iNav Lua Telemetry 2.2.4

When setting up the telemetry widget on a new model, selecting the iNav widget immediately causes the TX to crash and go into Emergency Mode.

To reproduce

On TX, install LuaTelemetry v2.2.4. In EdgeTX, create a new model. Select Telemetry and add a new screen (full screen with no tabs or trim displays). Then attempt to select iNav as the widget to be used. Boom! Emergency mode. After powering down and up, you are back to a new model with no telemetry screens (other than the default blank one).

This is a new radio so it doesn't appear in the support radio list. If so, then treat this report as a feature request. ;-)

stronnag commented 1 month ago

Supported radio ... didn't think so.

stronnag commented 1 month ago

Can you please try latest master and let me know if it fixes the T15 problem? (#155)

CCNNCHUN commented 1 month ago

I'm using jumper t15 firmware version edgetx2.10.3 lua 2.2.4 and it still doesn't work Screenshot_2024-08-07-00-15-44-663_com tencent mo

stronnag commented 1 month ago

I asked you to test master, not 2.2.4

Apologies, please test master. It should be fixed by #155

CCNNCHUN commented 1 month ago

~I asked you to test master, not 2.2.4~

Apologies, please test master. It should be fixed by #155

I tested the master and now it works fine, thanks

stronnag commented 1 month ago

Thank you. New release on its way ...