tinou1 commented 7 years ago

Hello. I ask you here because i gave a problem with my revolution :

my op gps works only with the main port, not work with the flexi port, do you know why?
I need to use the main port for put my L9R receiver on sbus protocol, so i have tried whith the flexio io port but doesn't work. I can use pwm protocol with the flexi io port but i just find 4 channel, channels 5 and 6 doesn't works. I have put the channel 5 on the port 1 on the flexi io port and works so the problem is on the board, not with my taranis and my receiver. Actually i'm block here, could you help me please? Thanks

digitalentity commented 7 years ago

Please provide more details. Preferrably the CLI dump of non-working setup.

tinou1 commented 7 years ago

Thanks.

My dump result :

dump

version

INAV/REVO 1.7.2 Jul 20 2017 / 12:02:27 (81b85de)

resources

mixer

mixer QUADX

mmix reset

servo

servo 0 1000 2000 1500 100 -1 servo 1 1000 2000 1500 100 -1 servo 2 1000 2000 1500 100 -1 servo 3 1000 2000 1500 100 -1 servo 4 1000 2000 1500 100 -1 servo 5 1000 2000 1500 100 -1 servo 6 1000 2000 1500 100 -1 servo 7 1000 2000 1500 100 -1

servo mix

smix reset

feature

feature -RX_PPM feature -VBAT feature -RX_SERIAL feature -MOTOR_STOP feature -SERVO_TILT feature -SOFTSERIAL feature -GPS feature -TELEMETRY feature -CURRENT_METER feature -3D feature -RX_PARALLEL_PWM feature -RX_MSP feature -RSSI_ADC feature -LED_STRIP feature -DASHBOARD feature -BLACKBOX feature -CHANNEL_FORWARDING feature -TRANSPONDER feature -AIRMODE feature -SUPEREXPO feature -VTX feature -RX_SPI feature -SOFTSPI feature -PWM_SERVO_DRIVER feature -PWM_OUTPUT_ENABLE feature -OSD feature GPS feature TELEMETRY feature RX_PARALLEL_PWM feature BLACKBOX feature PWM_OUTPUT_ENABLE

map

map AETR1234

name

name -

serial

serial 20 1 115200 38400 0 115200 serial 0 2 115200 57600 0 115200 serial 2 0 115200 57600 0 115200 serial 5 0 115200 57600 0 115200

aux

aux 0 0 0 900 1050 aux 1 1 0 1300 1700 aux 2 2 0 1300 1700 aux 3 0 0 900 900 aux 4 0 0 900 900 aux 5 0 0 900 900 aux 6 0 0 900 900 aux 7 0 0 900 900 aux 8 0 0 900 900 aux 9 0 0 900 900 aux 10 0 0 900 900 aux 11 0 0 900 900 aux 12 0 0 900 900 aux 13 0 0 900 900 aux 14 0 0 900 900 aux 15 0 0 900 900 aux 16 0 0 900 900 aux 17 0 0 900 900 aux 18 0 0 900 900 aux 19 0 0 900 900

adjrange

adjrange 0 0 0 900 900 0 0 adjrange 1 0 0 900 900 0 0 adjrange 2 0 0 900 900 0 0 adjrange 3 0 0 900 900 0 0 adjrange 4 0 0 900 900 0 0 adjrange 5 0 0 900 900 0 0 adjrange 6 0 0 900 900 0 0 adjrange 7 0 0 900 900 0 0 adjrange 8 0 0 900 900 0 0 adjrange 9 0 0 900 900 0 0 adjrange 10 0 0 900 900 0 0 adjrange 11 0 0 900 900 0 0

rxrange

rxrange 0 1000 2000 rxrange 1 1000 2000 rxrange 2 1000 2000 rxrange 3 1000 2000

master

set looptime = 2000 set gyro_sync = ON set gyro_sync_denom = 1 set align_gyro = DEFAULT set gyro_hardware_lpf = 188HZ set gyro_lpf_hz = 70 set moron_threshold = 32 set gyro_notch1_hz = 170 set gyro_notch1_cutoff = 125 set gyro_notch2_hz = 85 set gyro_notch2_cutoff = 43 set vbat_adc_channel = 2 set rssi_adc_channel = 3 set current_adc_channel = 1 set airspeed_adc_channel = 0 set acc_notch_hz = 0 set acc_notch_cutoff = 1 set align_acc = DEFAULT set acc_hardware = MPU6000 set acc_lpf_hz = 15 set acczero_x = 0 set acczero_y = 0 set acczero_z = 0 set accgain_x = 4096 set accgain_y = 4096 set accgain_z = 4096 set align_mag = DEFAULT set mag_hardware = HMC5883 set mag_declination = 0 set magzero_x = -548 set magzero_y = 390 set magzero_z = 29 set mag_calibration_time = 30 set baro_hardware = MS5611 set baro_use_median_filter = ON set pitot_hardware = NONE set pitot_use_median_filter = ON set pitot_noise_lpf = 0.600 set pitot_scale = 1.000 set mid_rc = 1500 set min_check = 1100 set max_check = 1900 set rssi_channel = 0 set rssi_scale = 30 set rssi_invert = OFF set rc_smoothing = ON set serialrx_provider = SBUS set sbus_inversion = ON set spektrum_sat_bind = 0 set rx_min_usec = 885 set rx_max_usec = 2115 set serialrx_halfduplex = OFF set blackbox_rate_num = 1 set blackbox_rate_denom = 1 set blackbox_device = SPIFLASH set min_throttle = 1150 set max_throttle = 1850 set min_command = 1000 set motor_pwm_rate = 400 set motor_pwm_protocol = STANDARD set failsafe_delay = 5 set failsafe_recovery_delay = 5 set failsafe_off_delay = 200 set failsafe_throttle = 1000 set failsafe_throttle_low_delay = 100 set failsafe_procedure = RTH set failsafe_stick_threshold = 50 set failsafe_fw_roll_angle = -200 set failsafe_fw_pitch_angle = 100 set failsafe_fw_yaw_rate = -45 set align_board_roll = -2 set align_board_pitch = 0 set align_board_yaw = 0 set gimbal_mode = NORMAL set battery_capacity = 0 set vbat_scale = 110 set vbat_max_cell_voltage = 43 set vbat_min_cell_voltage = 33 set vbat_warning_cell_voltage = 35 set current_meter_scale = 400 set current_meter_offset = 0 set multiwii_current_meter_output = OFF set current_meter_type = ADC set yaw_motor_direction = 1 set yaw_jump_prevention_limit = 200 set 3d_deadband_low = 1406 set 3d_deadband_high = 1514 set 3d_neutral = 1460 set servo_center_pulse = 1500 set servo_pwm_rate = 50 set servo_lpf_hz = 20 set flaperon_throw_offset = 200 set tri_unarmed_servo = ON set reboot_character = 82 set imu_dcm_kp = 2500 set imu_dcm_ki = 50 set imu_dcm_kp_mag = 10000 set imu_dcm_ki_mag = 0 set small_angle = 25 set fixed_wing_auto_arm = OFF set disarm_kill_switch = ON set auto_disarm_delay = 5 set gps_provider = NMEA set gps_sbas_mode = EGNOS set gps_dyn_model = AIR_1G set gps_auto_config = ON set gps_auto_baud = ON set gps_min_sats = 6 set deadband = 5 set yaw_deadband = 5 set pos_hold_deadband = 20 set alt_hold_deadband = 50 set 3d_deadband_throttle = 50 set fw_autotune_overshoot_time = 100 set fw_autotune_undershoot_time = 200 set fw_autotune_threshold = 50 set fw_autotune_ff_to_p_gain = 10 set fw_autotune_ff_to_i_tc = 600 set inav_auto_mag_decl = ON set inav_gravity_cal_tolerance = 5 set inav_use_gps_velned = ON set inav_gps_delay = 200 set inav_reset_altitude = FIRST_ARM set inav_max_surface_altitude = 200 set inav_w_z_surface_p = 3.500 set inav_w_z_surface_v = 6.100 set inav_w_z_baro_p = 0.350 set inav_w_z_gps_p = 0.200 set inav_w_z_gps_v = 0.500 set inav_w_xy_gps_p = 1.000 set inav_w_xy_gps_v = 2.000 set inav_w_z_res_v = 0.500 set inav_w_xy_res_v = 0.500 set inav_w_acc_bias = 0.010 set inav_max_eph_epv = 1000.000 set inav_baro_epv = 100.000 set nav_disarm_on_landing = OFF set nav_use_midthr_for_althold = OFF set nav_extra_arming_safety = ON set nav_user_control_mode = ATTI set nav_position_timeout = 5 set nav_wp_radius = 100 set nav_wp_safe_distance = 10000 set nav_auto_speed = 300 set nav_auto_climb_rate = 500 set nav_manual_speed = 500 set nav_manual_climb_rate = 200 set nav_landing_speed = 200 set nav_land_slowdown_minalt = 500 set nav_land_slowdown_maxalt = 2000 set nav_emerg_landing_speed = 500 set nav_min_rth_distance = 500 set nav_rth_climb_first = ON set nav_rth_climb_ignore_emerg = OFF set nav_rth_tail_first = OFF set nav_rth_allow_landing = ON set nav_rth_alt_mode = AT_LEAST set nav_rth_abort_threshold = 50000 set nav_rth_altitude = 1000 set nav_mc_bank_angle = 30 set nav_mc_hover_thr = 1500 set nav_mc_auto_disarm_delay = 2000 set nav_fw_cruise_thr = 1400 set nav_fw_min_thr = 1200 set nav_fw_max_thr = 1700 set nav_fw_bank_angle = 20 set nav_fw_climb_angle = 20 set nav_fw_dive_angle = 15 set nav_fw_pitch2thr = 10 set nav_fw_loiter_radius = 5000 set nav_fw_land_dive_angle = 2 set nav_fw_launch_velocity = 300 set nav_fw_launch_accel = 1863 set nav_fw_launch_max_angle = 45 set nav_fw_launch_detect_time = 40 set nav_fw_launch_thr = 1700 set nav_fw_launch_idle_thr = 1000 set nav_fw_launch_motor_delay = 500 set nav_fw_launch_spinup_time = 100 set nav_fw_launch_timeout = 5000 set nav_fw_launch_climb_angle = 18 set telemetry_switch = OFF set telemetry_inversion = OFF set frsky_default_latitude = 0.000 set frsky_default_longitude = 0.000 set frsky_coordinates_format = 0 set frsky_unit = IMPERIAL set frsky_vfas_precision = 0 set frsky_vfas_cell_voltage = OFF set hott_alarm_sound_interval = 5 set smartport_uart_unidir = OFF set ibus_telemetry_type = 0 set ltm_update_rate = NORMAL set ledstrip_visual_beeper = OFF set i2c_overclock = OFF set debug_mode = NONE set acc_task_frequency = 500 set attitude_task_frequency = 250 set async_mode = GYRO set throttle_tilt_comp_str = 0 set input_filtering_mode = OFF set mode_range_logic_operator = OR set stats = OFF set stats_total_time = 0 set stats_total_dist = 0

profile

profile 1

set mc_p_pitch = 80 set mc_i_pitch = 30 set mc_d_pitch = 18 set mc_p_roll = 80 set mc_i_roll = 30 set mc_d_roll = 18 set mc_p_yaw = 95 set mc_i_yaw = 45 set mc_d_yaw = 0 set mc_p_level = 20 set mc_i_level = 15 set mc_d_level = 75 set fw_p_pitch = 5 set fw_i_pitch = 7 set fw_ff_pitch = 50 set fw_p_roll = 5 set fw_i_roll = 7 set fw_ff_roll = 50 set fw_p_yaw = 6 set fw_i_yaw = 10 set fw_ff_yaw = 60 set fw_p_level = 20 set fw_i_level = 5 set fw_d_level = 75 set max_angle_inclination_rll = 300 set max_angle_inclination_pit = 300 set dterm_lpf_hz = 40 set yaw_lpf_hz = 30 set dterm_setpoint_weight = 0.000 set fw_iterm_throw_limit = 165 set fw_reference_airspeed = 1000.000 set fw_turn_assist_yaw_gain = 1.000 set dterm_notch_hz = 125 set dterm_notch_cutoff = 90 set pidsum_limit = 500 set yaw_p_limit = 300 set iterm_ignore_threshold = 200 set yaw_iterm_ignore_threshold = 50 set rate_accel_limit_roll_pitch = 2400 set rate_accel_limit_yaw = 360 set heading_hold_rate_limit = 30 set nav_mc_pos_z_p = 50 set nav_mc_pos_z_i = 0 set nav_mc_pos_z_d = 0 set nav_mc_vel_z_p = 100 set nav_mc_vel_z_i = 50 set nav_mc_vel_z_d = 10 set nav_mc_pos_xy_p = 65 set nav_mc_pos_xy_i = 120 set nav_mc_pos_xy_d = 10 set nav_mc_vel_xy_p = 180 set nav_mc_vel_xy_i = 15 set nav_mc_vel_xy_d = 100 set nav_fw_pos_z_p = 50 set nav_fw_pos_z_i = 0 set nav_fw_pos_z_d = 0 set nav_fw_pos_xy_p = 75 set nav_fw_pos_xy_i = 5 set nav_fw_pos_xy_d = 8 set rc_expo = 70 set rc_yaw_expo = 20 set thr_mid = 50 set thr_expo = 0 set roll_rate = 40 set pitch_rate = 40 set yaw_rate = 20 set tpa_rate = 0 set tpa_breakpoint = 1500

tinou1 commented 7 years ago

Receiver work perfectly with sbus on main port.

digitalentity commented 7 years ago

@tinou1 can't reproduce the issue. With 1.7.2 GPS receiver works fine both on main (UART1) and flexi (UART3).

Btw in your dump GPS is configured for UART1 (works perfectly). Please provide dump of a non-working setup.

tinou1 commented 7 years ago

Entering CLI Mode, type 'exit' to return, or 'help'

dump gps

version

INAV/REVO 1.7.2 Jul 20 2017 / 12:02:27 (81b85de)

resources

mixer

mixer QUADX

mmix reset

servo

servo 0 1000 2000 1500 100 -1 servo 1 1000 2000 1500 100 -1 servo 2 1000 2000 1500 100 -1 servo 3 1000 2000 1500 100 -1 servo 4 1000 2000 1500 100 -1 servo 5 1000 2000 1500 100 -1 servo 6 1000 2000 1500 100 -1 servo 7 1000 2000 1500 100 -1

servo mix

smix reset

feature

feature -RX_PPM feature -VBAT feature -RX_SERIAL feature -MOTOR_STOP feature -SERVO_TILT feature -SOFTSERIAL feature -GPS feature -TELEMETRY feature -CURRENT_METER feature -3D feature -RX_PARALLEL_PWM feature -RX_MSP feature -RSSI_ADC feature -LED_STRIP feature -DASHBOARD feature -BLACKBOX feature -CHANNEL_FORWARDING feature -TRANSPONDER feature -AIRMODE feature -SUPEREXPO feature -VTX feature -RX_SPI feature -SOFTSPI feature -PWM_SERVO_DRIVER feature -PWM_OUTPUT_ENABLE feature -OSD feature RX_SERIAL feature GPS feature TELEMETRY feature BLACKBOX feature PWM_OUTPUT_ENABLE

beeper

beeper RUNTIME_CALIBRATION beeper HW_FAILURE beeper RX_LOST beeper RX_LOST_LANDING beeper DISARMING beeper ARMING beeper ARMING_GPS_FIX beeper BAT_CRIT_LOW beeper BAT_LOW beeper GPS_STATUS beeper RX_SET beeper ACTION_SUCCESS beeper ACTION_FAIL beeper READY_BEEP beeper MULTI_BEEPS beeper DISARM_REPEAT beeper ARMED beeper SYSTEM_INIT beeper ON_USB beeper LAUNCH_MODE

map

map AETR1234

name

name -

serial

serial 20 1 115200 38400 0 115200 serial 0 64 115200 57600 0 115200 serial 2 2 115200 57600 0 115200 serial 5 0 115200 57600 0 115200

aux

aux 0 0 0 900 1050 aux 1 1 0 1300 1700 aux 2 2 0 1300 1700 aux 3 0 0 900 900 aux 4 0 0 900 900 aux 5 0 0 900 900 aux 6 0 0 900 900 aux 7 0 0 900 900 aux 8 0 0 900 900 aux 9 0 0 900 900 aux 10 0 0 900 900 aux 11 0 0 900 900 aux 12 0 0 900 900 aux 13 0 0 900 900 aux 14 0 0 900 900 aux 15 0 0 900 900 aux 16 0 0 900 900 aux 17 0 0 900 900 aux 18 0 0 900 900 aux 19 0 0 900 900

adjrange

adjrange 0 0 0 900 900 0 0 adjrange 1 0 0 900 900 0 0 adjrange 2 0 0 900 900 0 0 adjrange 3 0 0 900 900 0 0 adjrange 4 0 0 900 900 0 0 adjrange 5 0 0 900 900 0 0 adjrange 6 0 0 900 900 0 0 adjrange 7 0 0 900 900 0 0 adjrange 8 0 0 900 900 0 0 adjrange 9 0 0 900 900 0 0 adjrange 10 0 0 900 900 0 0 adjrange 11 0 0 900 900 0 0

rxrange

rxrange 0 1000 2000 rxrange 1 1000 2000 rxrange 2 1000 2000 rxrange 3 1000 2000

master

set looptime = 2000 set gyro_sync = ON set gyro_sync_denom = 1 set align_gyro = DEFAULT set gyro_hardware_lpf = 188HZ set gyro_lpf_hz = 70 set moron_threshold = 32 set gyro_notch1_hz = 170 set gyro_notch1_cutoff = 125 set gyro_notch2_hz = 85 set gyro_notch2_cutoff = 43 set vbat_adc_channel = 2 set rssi_adc_channel = 3 set current_adc_channel = 1 set airspeed_adc_channel = 0 set acc_notch_hz = 0 set acc_notch_cutoff = 1 set align_acc = DEFAULT set acc_hardware = MPU6000 set acc_lpf_hz = 15 set acczero_x = 0 set acczero_y = 0 set acczero_z = 0 set accgain_x = 4096 set accgain_y = 4096 set accgain_z = 4096 set align_mag = DEFAULT set mag_hardware = HMC5883 set mag_declination = 0 set magzero_x = -548 set magzero_y = 390 set magzero_z = 29 set mag_calibration_time = 30 set baro_hardware = MS5611 set baro_use_median_filter = ON set pitot_hardware = NONE set pitot_use_median_filter = ON set pitot_noise_lpf = 0.600 set pitot_scale = 1.000 set mid_rc = 1500 set min_check = 1100 set max_check = 1900 set rssi_channel = 0 set rssi_scale = 30 set rssi_invert = OFF set rc_smoothing = ON set serialrx_provider = SBUS set sbus_inversion = ON set spektrum_sat_bind = 0 set rx_min_usec = 885 set rx_max_usec = 2115 set serialrx_halfduplex = OFF set blackbox_rate_num = 1 set blackbox_rate_denom = 1 set blackbox_device = SPIFLASH set min_throttle = 1150 set max_throttle = 1850 set min_command = 1000 set motor_pwm_rate = 400 set motor_pwm_protocol = STANDARD set failsafe_delay = 5 set failsafe_recovery_delay = 5 set failsafe_off_delay = 200 set failsafe_throttle = 1000 set failsafe_throttle_low_delay = 100 set failsafe_procedure = RTH set failsafe_stick_threshold = 50 set failsafe_fw_roll_angle = -200 set failsafe_fw_pitch_angle = 100 set failsafe_fw_yaw_rate = -45 set align_board_roll = -4 set align_board_pitch = 0 set align_board_yaw = 0 set gimbal_mode = NORMAL set battery_capacity = 0 set vbat_scale = 110 set vbat_max_cell_voltage = 43 set vbat_min_cell_voltage = 33 set vbat_warning_cell_voltage = 35 set current_meter_scale = 400 set current_meter_offset = 0 set multiwii_current_meter_output = OFF set current_meter_type = ADC set yaw_motor_direction = 1 set yaw_jump_prevention_limit = 200 set 3d_deadband_low = 1406 set 3d_deadband_high = 1514 set 3d_neutral = 1460 set servo_center_pulse = 1500 set servo_pwm_rate = 50 set servo_lpf_hz = 20 set flaperon_throw_offset = 200 set tri_unarmed_servo = ON set reboot_character = 82 set imu_dcm_kp = 2500 set imu_dcm_ki = 50 set imu_dcm_kp_mag = 10000 set imu_dcm_ki_mag = 0 set small_angle = 25 set fixed_wing_auto_arm = OFF set disarm_kill_switch = ON set auto_disarm_delay = 5 set gps_provider = NMEA set gps_sbas_mode = EGNOS set gps_dyn_model = AIR_1G set gps_auto_config = ON set gps_auto_baud = ON set gps_min_sats = 6 set deadband = 5 set yaw_deadband = 5 set pos_hold_deadband = 20 set alt_hold_deadband = 50 set 3d_deadband_throttle = 50 set fw_autotune_overshoot_time = 100 set fw_autotune_undershoot_time = 200 set fw_autotune_threshold = 50 set fw_autotune_ff_to_p_gain = 10 set fw_autotune_ff_to_i_tc = 600 set inav_auto_mag_decl = ON set inav_gravity_cal_tolerance = 5 set inav_use_gps_velned = ON set inav_gps_delay = 200 set inav_reset_altitude = FIRST_ARM set inav_max_surface_altitude = 200 set inav_w_z_surface_p = 3.500 set inav_w_z_surface_v = 6.100 set inav_w_z_baro_p = 0.350 set inav_w_z_gps_p = 0.200 set inav_w_z_gps_v = 0.500 set inav_w_xy_gps_p = 1.000 set inav_w_xy_gps_v = 2.000 set inav_w_z_res_v = 0.500 set inav_w_xy_res_v = 0.500 set inav_w_acc_bias = 0.010 set inav_max_eph_epv = 1000.000 set inav_baro_epv = 100.000 set nav_disarm_on_landing = OFF set nav_use_midthr_for_althold = OFF set nav_extra_arming_safety = ON set nav_user_control_mode = ATTI set nav_position_timeout = 5 set nav_wp_radius = 100 set nav_wp_safe_distance = 10000 set nav_auto_speed = 300 set nav_auto_climb_rate = 500 set nav_manual_speed = 500 set nav_manual_climb_rate = 200 set nav_landing_speed = 200 set nav_land_slowdown_minalt = 500 set nav_land_slowdown_maxalt = 2000 set nav_emerg_landing_speed = 500 set nav_min_rth_distance = 500 set nav_rth_climb_first = ON set nav_rth_climb_ignore_emerg = OFF set nav_rth_tail_first = OFF set nav_rth_allow_landing = ON set nav_rth_alt_mode = AT_LEAST set nav_rth_abort_threshold = 50000 set nav_rth_altitude = 1000 set nav_mc_bank_angle = 30 set nav_mc_hover_thr = 1500 set nav_mc_auto_disarm_delay = 2000 set nav_fw_cruise_thr = 1400 set nav_fw_min_thr = 1200 set nav_fw_max_thr = 1700 set nav_fw_bank_angle = 20 set nav_fw_climb_angle = 20 set nav_fw_dive_angle = 15 set nav_fw_pitch2thr = 10 set nav_fw_loiter_radius = 5000 set nav_fw_land_dive_angle = 2 set nav_fw_launch_velocity = 300 set nav_fw_launch_accel = 1863 set nav_fw_launch_max_angle = 45 set nav_fw_launch_detect_time = 40 set nav_fw_launch_thr = 1700 set nav_fw_launch_idle_thr = 1000 set nav_fw_launch_motor_delay = 500 set nav_fw_launch_spinup_time = 100 set nav_fw_launch_timeout = 5000 set nav_fw_launch_climb_angle = 18 set telemetry_switch = OFF set telemetry_inversion = OFF set frsky_default_latitude = 0.000 set frsky_default_longitude = 0.000 set frsky_coordinates_format = 0 set frsky_unit = IMPERIAL set frsky_vfas_precision = 0 set frsky_vfas_cell_voltage = OFF set hott_alarm_sound_interval = 5 set smartport_uart_unidir = OFF set ibus_telemetry_type = 0 set ltm_update_rate = NORMAL set ledstrip_visual_beeper = OFF set i2c_overclock = OFF set debug_mode = NONE set acc_task_frequency = 500 set attitude_task_frequency = 250 set async_mode = GYRO set throttle_tilt_comp_str = 0 set input_filtering_mode = OFF set mode_range_logic_operator = OR set stats = OFF set stats_total_time = 0 set stats_total_dist = 0

profile

profile 1

set mc_p_pitch = 80 set mc_i_pitch = 30 set mc_d_pitch = 18 set mc_p_roll = 80 set mc_i_roll = 30 set mc_d_roll = 18 set mc_p_yaw = 95 set mc_i_yaw = 45 set mc_d_yaw = 0 set mc_p_level = 20 set mc_i_level = 15 set mc_d_level = 75 set fw_p_pitch = 5 set fw_i_pitch = 7 set fw_ff_pitch = 50 set fw_p_roll = 5 set fw_i_roll = 7 set fw_ff_roll = 50 set fw_p_yaw = 6 set fw_i_yaw = 10 set fw_ff_yaw = 60 set fw_p_level = 20 set fw_i_level = 5 set fw_d_level = 75 set max_angle_inclination_rll = 300 set max_angle_inclination_pit = 300 set dterm_lpf_hz = 40 set yaw_lpf_hz = 30 set dterm_setpoint_weight = 0.000 set fw_iterm_throw_limit = 165 set fw_reference_airspeed = 1000.000 set fw_turn_assist_yaw_gain = 1.000 set dterm_notch_hz = 125 set dterm_notch_cutoff = 90 set pidsum_limit = 500 set yaw_p_limit = 300 set iterm_ignore_threshold = 200 set yaw_iterm_ignore_threshold = 50 set rate_accel_limit_roll_pitch = 2400 set rate_accel_limit_yaw = 360 set heading_hold_rate_limit = 30 set nav_mc_pos_z_p = 50 set nav_mc_pos_z_i = 0 set nav_mc_pos_z_d = 0 set nav_mc_vel_z_p = 100 set nav_mc_vel_z_i = 50 set nav_mc_vel_z_d = 10 set nav_mc_pos_xy_p = 65 set nav_mc_pos_xy_i = 120 set nav_mc_pos_xy_d = 10 set nav_mc_vel_xy_p = 180 set nav_mc_vel_xy_i = 15 set nav_mc_vel_xy_d = 100 set nav_fw_pos_z_p = 50 set nav_fw_pos_z_i = 0 set nav_fw_pos_z_d = 0 set nav_fw_pos_xy_p = 75 set nav_fw_pos_xy_i = 5 set nav_fw_pos_xy_d = 8 set rc_expo = 70 set rc_yaw_expo = 20 set thr_mid = 50 set thr_expo = 0 set roll_rate = 40 set pitch_rate = 40 set yaw_rate = 20 set tpa_rate = 0 set tpa_breakpoint = 1500

tinou1 commented 7 years ago

How can i check if is not my flexi port who can be dead? Thank for all

digitalentity commented 7 years ago

With an oscilloscope. It should output data on TX pin when configured for GPS.

tinou1 commented 7 years ago

Ok i will ask to a friend for the oscilloscope

iNavFlight / inav

Revolution board -- port problems #2073

version

INAV/REVO 1.7.2 Jul 20 2017 / 12:02:27 (81b85de)

resources

mixer

servo

servo mix

feature

map

name

serial

aux

adjrange

rxrange

master

profile

dump gps

version

INAV/REVO 1.7.2 Jul 20 2017 / 12:02:27 (81b85de)

resources

mixer

servo

servo mix

feature

beeper

map

name

serial

aux

adjrange

rxrange

master

profile