search

iNavFlight / inav

INAV: Navigation-enabled flight control software
https://inavflight.github.io
GNU General Public License v3.0
3.15k stars 1.48k forks source link

DYS F4 PRO V2 - FPORT not working with current inav #5158

Closed Schakus closed 4 years ago

Schakus commented 5 years ago

Current Behavior

I updated my drone from inav 2.0.1 to 2.2.1 and FPORT stops working. With the old version it works. I tried for 2 hours, soldered it to different pins, cli commands (inverted, half duplex) nothing worked. Then I flashed betaflight and FPORT works there. I tried also SBUS with inav 2.2.1 and its not working.

Hardware

Frsky XLite Frsky R9M lite Frsly R9 Mini

Steps to Reproduce

  1. flash current inav on fc
  2. UART1, enable serial rx
  3. choose fport as protocol
  4. cli: set serialrx_inverted = ON

That is what my old setting in inav 2.0.1 was and its also working in with the current betaflight, but not with inav 2.2.1.

Suggested solution(s)

Please double check it. I have no idea what I can do. Many thanks!

INAV/DYSF4PROV2 2.2.1 Jul 3 2019 / 22:12:16 (a6d847482)

GCC-8.2.1 20181213 (release) [gcc-8-branch revision 267074]

issue-label-bot[bot] commented 5 years ago

Issue-Label Bot is automatically applying the label BUG to this issue, with a confidence of 0.87. Please mark this comment with :thumbsup: or :thumbsdown: to give our bot feedback!

Links: app homepage, dashboard and code for this bot.

Schakus commented 5 years ago

Update: with inav 2.1.0 its working. with newer versions not.

Schakus commented 4 years ago

SBUS is also not working with the current version of inav.

Schakus commented 4 years ago

Could somebody have a look about this topic?