search

iamromulan / quectel-rgmii-configuration-notes

Notes on using a Quectel modem directly connected to Ethernet
84 stars 14 forks source link

NO DETECTED DEVICE IN ADB #4

Closed cint1993 closed 5 months ago

cint1993 commented 5 months ago

Thank you for this guide. This is a great help for us and the 5g community.

I'm having a problem Sir, I have enabled ADB on my Waveshare 5g to Eth [https://www.waveshare.com/5g-m.2-to-gigabit-eth.html] , followed the guide 100% yet this won't be detected when I type adb devices on adb and fastboot++ command prompt. I know this is odd, is there a work around when trying to access ADB of RM520n? Do I need to downgrade my module firmware? btw I am using the latest firmware and installed the all required driver for windows.

Here is the screenshot when trying to access ADB

received_393387810166097

Enabled ADB:

received_777143304391061

dr-dolomite commented 5 months ago

You also messaged me directly through messenger and I believe that this is not an issue with Simpleadmin or other services that our repo offers. Kindly recheck if you did enabled the ADB on your module by providing it's unique code and also sending the enabling command. It is also possible that the issue might be caused by your M.2 to ETH board itself since we haven't tried that specific model. - Rus

iamromulan commented 5 months ago

@cint1993 What's that emulator device? Also, check in device manager toward the bottom in your USB devices. Should see something called Adb Interface. If it mentions Q something or Quectel that's the wrong driver.

cint1993 commented 5 months ago

I just found out a solution sir. The issue is my operating system permission settings. I used linux and it solved the issue. Cheers to more development with RGMII. Hoping for more updates 🎉