search

iceman1001 / proxmark3

[Deprecated] Iceman Fork, the most totally wicked fork around if you are into proxmark3
http://www.icedev.se/pm3.aspx
GNU General Public License v2.0
464 stars 116 forks source link

Hardnested crashing the client on 2nd run. #224

Closed TomHarkness closed 5 years ago

TomHarkness commented 5 years ago

Hi guys,

Latest iceman FW and client on an RDV2 - hardnested crashes the client on the second attempt. Throwing:

Segmentation fault: 11

Strangely this is not happening with a proxmark3 easy on the same build.

Latest OS X with an 8th gen i7 with 32GB of memory so it is not resource related like some previous similar issues.

iceman1001 commented 5 years ago

...opened and closed. I guess it does work ?

TomHarkness commented 5 years ago

Issue was with a specific card so closed until I know more. Throws errors every time when trying to hardnest block 11 key B. Every single time with that same card. Other cards work fine.

On Fri, 10 Aug 2018 at 3:00 pm, Iceman notifications@github.com wrote:

...opened and closed. I guess it does work ?

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/iceman1001/proxmark3/issues/224#issuecomment-411975621, or mute the thread https://github.com/notifications/unsubscribe-auth/AVTaIGJJtdzP2Qpe-_-LcxvaAto4zwuDks5uPRNngaJpZM4V3hOt .

-- Cheers, Tom H.

iceman1001 commented 5 years ago

Can you save a nonce file from when running hardnested against that sector?

TomHarkness commented 5 years ago

Will do this and get it uploaded for you later today.

TomHarkness commented 5 years ago

Update: I think this is actually happening when a card is too close to the HF ant on my RDV3

iceman1001 commented 5 years ago

1-2cm distance is usually needed for 14a comms. All 14a comms works very bad if tag is direct on antenna.

TomHarkness commented 5 years ago

Confirmed - antenna to close.