shreybohra
commented
5 months ago amp has been removed from the main PCB. it is unlikely we'll be flying it at all, but if we do we'll use a breakout and wire it to the external i2c connectors
Open shreybohra opened 5 months ago
shreybohra
commented
5 months ago amp has been removed from the main PCB. it is unlikely we'll be flying it at all, but if we do we'll use a breakout and wire it to the external i2c connectors
We have a MCP96L00T thermocouple amplifier connected over the I2C0 bus. This module should report temperatures coming from the amp, and also be able to set the thermocouple type. The amp will require calibration, a mechanism for doing this should be considered.