[Connect Tech] - [XHG312] - [NVIDIA Jetson Xavier NX Active Heatsink]

Mick3Lozzo commented 8 months ago

Description	NVIDIA Jetson Xavier NX Active Heatsink, 40mm fan
Datasheet component	CTIM-XHG312_Manual.pdf, XHG312_3D_MODEL.zip
Project	ergoCub
Alias Creo	Connecttech_XHG312
IIT-Code	16945
Applicant	Michele Gesino @Mick3Lozzo
Supervisor	Nicolò Genesio, @Nicogene
Maintainer	Marcello Savoldi, @marcellosavoldi
Coworkers	@icub-tech-iit/silo-mech

Attachment:

Notes:

Checklist:

Complete the checklist to proceed with the request.

[x] Created the Alias following the standard convention.
[x] Added, if necessary, the source files (STEP, IGS, etc), the links/datasheets/drawings or other information used to create the library part.
[x] File imported using the Creo start part commercial.
[x] Checked mass properties.
[x] Checked if one special case applies to this component.
[x] Converted the files with the EDU-COM license.
[x] Created IIT code in WINGST with manufacturer and at least one supplier.

Mick3Lozzo commented 8 months ago

Weight to verify, the internet says 0.8, but what?

Nicogene commented 8 months ago

Weight to verify, the internet says 0.8, but what?

You can check what weght has in the iCub 3 cad since it is mounting the Xavier NX

Mick3Lozzo commented 8 months ago

Weight XHG312: 57g source: the web.

fiorisi commented 8 months ago

Weight XHG312: 57g source: the web.

@Mick3Lozzo maybe you can add a screenshot or a link.

Mick3Lozzo commented 8 months ago

⬆️ @fiorisi

Mick3Lozzo commented 8 months ago

Updated mass.

marcellosavoldi commented 8 months ago

I think it might be useful to define on the model where the electrical wires come out of... is it by any chance possible to indicate them figuratively on the 3D model?

Mick3Lozzo commented 8 months ago

@marcellosavoldi added cosmetic cables.

icub-tech-iit / cad-libraries