Amphenol- HP-3-MDW / HP-3-MDGW - Separate power connectors. One for the power supply and one for the charger. -ergoCub1.1

Elio75 commented 7 months ago

Description	Field
Datasheet component	HP-Series-Standard-Data-181107.pdf
Project	ergoCub1.1
Alias Creo	[AMPHENOL_HP-3-MDW / 17761] - [AMPHENOL_HP-3-MDGW / 17760]
IIT-Code	cod.17761 / cod.17760
Applicant	Elio Massa @Elio75
Supervisor	F. Larosa, @Fabrizio69
Maintainer	Marcello Savoldi, @marcellosavoldi
Coworkers	@icub-tech-iit/silo-mech

Attachment:

Amphenol

Notes:

Checklist:

Complete the checklist in order to proceed with the request.

[x] Created the Alias following the standard convention.
[x] Added, if necessary, the source files (STEP, IGS, etc), the links/datasheets/drawings or other information used to create the library part.
[x] File imported using the Creo start part commercial.
[x] Checked mass properties.
[x] Checked if one special case applies to this component.
[x] Converted the files with the EDU-COM license.
[x] Created IIT code in WINGST with manufacturer and at least one supplier.

Elio75 commented 7 months ago

AMPHENOL_HP-3-MDGW cod.17760 weight 12gr

Elio75 commented 7 months ago

AMPHENOL_HP-3-MDW cod.17761 weight 12gr

marcellosavoldi commented 6 months ago

It might be useful to add a cosmetic plug as described in the WIKI to better verify the actual dimensions during the study. remember the right level "PLUGS".

Elio75 commented 6 months ago

It might be useful to add a cosmetic plug as described in the WIKI to better verify the actual dimensions during the study. remember the right level "PLUGS".

Added cosmetic and MATE_CONN

CC @marcellosavoldi @Fabrizio69

Elio75 commented 6 months ago

I have added in CAD-libraries the plugs that mate with the connectors

AMPHENOL_HP-3-FG cod.17762
AMPHENOL_HP-3-F cod.17763

commit Added plugs Amphenol

CC @marcellosavoldi @Fabrizio69

icub-tech-iit / cad-libraries