Open marcellosavoldi opened 6 months ago
Il fornitore esterno sta eseguendo la sbrogliatura della nuova BMS.
Ing. Alessandro Piazza Biamino & Figli SpA via Geirato 104c - 16138 Genova - Italia Tel 010 8355 098 Int. 218 www.biamino.com
Visto che dovremo poi creare la scheda PLUG, sarebbe meglio per eseguire le verifiche del caso creare i connettori in oggetto.
Attualmente ho creato i connettori a CAD e mi è stata spedita una scheda preliminare ( un file step):
i connettori in oggetto sono cosi posizionati ( preliminarmente) :
Vorrei prima capire dove posizionare l'origine nel primo connettore:
Ciao @marcellosavoldi nel primo ti direi pin A1 in alto a sn ( 180 gradi rispetto al disegno attuale) e origine al centro che componente. Per default quando lo dovró fare lo disegneró cosí. Non so se sono stato pertinente, in caso contrario non tenerne conto
Created librarie part: MOLEX_46562-9321
Im going to define the plug
mating info:
Created librarie part: MOLEX_46437-9321
@maurizbo , let us remember this issue when the time comes to create the electronic libraries figure. I would close this one, as the models are done. Are you agree?
cc: @fgarini , @andresoll
ciao @marcellosavoldi a way to remember we have the CAD figures could be to add wingst code with aliases and purchaseable P/N in the right categories, what do you think?
as you prefer @fgarini , As far as the MOLEX_46562-9321 connector is concerned, I don't think we will buy it just yet. While the code MOLEX_46437-9321 will probably need us for the Battery-Robot connection board.
I'd like to ask for more samples on the Molex site... have we ever done that? can we?
For the sample in the past I contacted a sales representative or alternatively there is the contact module here: https://tools.molex.com/molex/smp/amesamplereq
Alternatively you can buy them via usual suppliers rs, farnell mouser (..)
For the sample in the past I contacted a sales representative or alternatively there is the contact module here: https://tools.molex.com/molex/smp/amesamplereq
Alternatively you can buy them via usual suppliers rs, farnell mouser (..)
I knew Visioli who is now retired... do you know any Molex representatives? I wait for you to create the codes on WIngst before closing this Issue?
I added another molex contact (person) Giorgio Badino Sales Development Account Manager +34 611476644 giorgio.badino@molex.com
How can we proceed? Do we also create the library figures in PADS before closing the issue as previously discussed?
@fgarini , @maurizbo , @fiorisi
Hi @marcellosavoldi you can close it, perhaps when it will be needed the footprint will be made in Xpedition (the new EDA tool) @fgarini @fiorisi
with @fiorisi we talked about the fact that it would be better to do them, but if you think not I can close...
Ok @marcellosavoldi we will speak about at the tomorrow SU
cc @andreaderito
it was decided to close the issue. Electronic libraries parts will be made later
The issue was reopened to verify a few things ... see HERE
We'll use this issue only for the connector 46562-9321 About the 46437-9321 an other issue already exist
I'm going to cerrect the title from ECAD - [Molex_46562-9321 and Molex_46437-9321] - [IIT-CODE] - [new BMS connectors] to ECAD - [Molex_46562-9321 ] - [18167] - [new BMS connectors]
@maurizbo , @andresoll , @fgarini
Can you confirm the new ALIAS name " MOLEX_EXT_TEN60_15PIN_MALE_90 " for the Molex code 46562-9321 ?
@marcellosavoldi i checked wingst and the P/N there are now correct, take them as reference
Can you confirm the new ALIAS name " MOLEX_EXT_TEN60_15PIN_MALE_90 " for the Molex code 46562-9321 ?
the answer is NO
all right from your side?
OK, I'm going to remane to MOLEX_EXT_TEN60_15PIN_FEM_STR
Legend:
Image with origin e PIN 1 position by PADS (mandatory)
TBD
Attachments (optional)
see: https://www.molex.com/en-us/products/part-detail/465629321 https://www.molex.com/en-us/products/part-detail/464379321
Plug connector information (mandatory for connectors "board to wire")
the above connectors connect to each other. are both to be assembled on a circuit board
Notes (optional)
La scheda la sta eseguento la ditta Biamino , ma sarebbe meglio avere i connettori anche noi. le issue di riferimento: https://github.com/icub-tech-iit/ergocub2-design-upperbody/issues/23 https://github.com/icub-tech-iit/ergocub2-design-upperbody/issues/25 https://github.com/icub-tech-iit/electronics-boards/issues/370 https://github.com/icub-tech-iit/electronics-boards/issues/312
Checklist: