Vision Light Tech - ACF125B0158IRM12 - S-Mount lens

icub-tech-iit / cad-libraries

In this repository we store the CAD libraries and the PTC Creo configuration files.

16 stars 9 forks source link

Vision Light Tech - ACF125B0158IRM12 - S-Mount lens #179

Open Lawproto opened 3 months ago

Lawproto commented 3 months ago

Description	Field
Datasheet component	[link or attachment ]
Project	Eyes Mk4
Alias Creo	VLT_ACF125B0158IRM12
IIT-Code	[if available]
Applicant	Lorenzo Protopapa, @Lawproto
Supervisor	Nicolò Genesio, @Nicogene
Maintainer	Marcello Savoldi, @marcellosavoldi
Coworkers	@icub-tech-iit/silo-mech

Attachment:

https://www.visionlighttech.com/storage/16878/ACF125B0158IRM12.pdf

Notes:

Checklist:

Complete the checklist in order to proceed with the request.

[x] Created the Alias following the standard convention.
[x] Added, if necessary, the source files (STEP, IGS, etc), the links/datasheets/drawings or other information used to create the library part.
[x] File imported using the Creo start part commercial.
[ ] Checked mass properties.
[x] Checked if one special case applies to this component.
[x] Converted the files with the EDU-COM license.
[ ] Created IIT code in WINGST with manufacturer and at least one supplier.

Lawproto commented 3 months ago

I created the item following the datasheet.

immagine

Not sure if the LE category is correct for this item. COMM and ELTR also seem possible to me.

Lawproto commented 3 months ago

For now I added the same mass of the Basler. To be checked when we receive the physical objects.

marcellosavoldi commented 3 months ago

I created the item following the datasheet.

Not sure if the LE category is correct for this item. COMM and ELTR also seem possible to me.

The LE category in CAD is not usually used. Better to use another category... like COMM . Honestly ELTR I would only use it for components to be used on electronic boards (to be used on CAD-Collaboration). what do others think?

Lawproto commented 3 months ago

@marcellosavoldi ELTR or COMM makes a huge difference because it establishes whether the item is gonna be filtered from the mechanical BoM or not. I can see the reasoning beyond the ELTR since they are usually mounted on a board module.

For instance, the Basler camera (4k head) has been categorized as ELTR, so I am assuming it appears somewhere in the electronic BoM. Is that so?

immagine

cc @maggia80

maggia80 commented 3 months ago

@Lawproto, yes we are used to including the lens in the Logic Schematics. We will add them in the BoM of the head logic

Lawproto commented 3 months ago

@maggia80 so ELTR be it. I am assuming the related board modules follow the same category.

maggia80 commented 3 months ago

yes!

marcellosavoldi commented 3 months ago

Perfect... as long as it is present in the electronic BOM, because Wingst the ELTR category skips it. great!