Closed marcellosavoldi closed 2 months ago
I'd suggest to change the alias from MOLEX_46437-9321 to MOLEX_EXT_TEN60_15PIN
cc @marcellosavoldi @andresoll
what mean EXT, TEN60, 15PIN.... ?
EXTreme Ten60Power Right-Angle Plug with Side Guides, 1 DC Power Circuit, 15 Signal Circuits, 1 DC Power Circuit, Press Fit Tail
@marcellosavoldi All it's seemed to me too much long
This is a kind of component that will not be used anymore ...so could be useful to avoid similarity
the procedures read as follows:
The file name must be decided in accordance with the electronic team.
... so we can proceed as you think best.
Connector renamed as required
For The final name of the MOLEX 46437-9321
MOLEX_EXT_TEN60_15PIN
@maurizbo , @andresoll , can we close this issue?
Hi @marcellosavoldi can you wait just the quick check from @andresoll in the pads figure ? We can close tomorrow
@maurizbo , @andresoll , @fgarini
about the comment HERE Can you confirm the new ALIAS name " MOLEX_EXT_TEN60_15PIN_MALE_90 " for the Molex code 46437-9321 ?
@maurizbo , if you want check your model Vs the CAD model , following some dimensions:
@maurizbo , @andresoll , @fgarini
about the comment HERE Can you confirm the new ALIAS name " MOLEX_EXT_TEN60_15PIN_MALE_90 " for the Molex code 46437-9321 ?
@marcellosavoldi yes 👍
SOME DIMENSIONS TO CHECK THE PADS LIBRARIES FIGURE:
(the real part is not symmetrical)
Check consequently:
Hi guys, I saw there are still 2 tasks to complete this task. Is it correct or can we close the issue?
This task can be closed
cc @valegagge @andresoll @marcellosavoldi
Legend:
Image with origin e PIN 1 position by PADS (mandatory)
Attachments (optional)
Plug connector information (mandatory for connectors "board to wire")
MOLEX_46562-9321
Notes (optional)
IIT-CODE 18163
Checklist: