IGUS - GSM-0506-046 - sleeve bearing

Lawproto commented 2 years ago

Description	Field
Datasheet component	https://www.igus.it/product?artNr=GSM-0506-046
Project	ergoCub lower arm (Mk2)
Alias Creo	IGUS_GSM-0506-046
IIT-Code	16215
Applicant	Lorenzo Protopapa, @Lawproto
Supervisor	Luca Fiorio, @fiorisi
Maintainer	Marcello Savoldi, @marcellosavoldi
Coworkers	@icub-tech-iit/silo-mech

Attachment:

Notes:

Checklist:

Complete the checklist in order to proceed with the request.

[x] Created the Alias following the standard convention.
[x] Added, if necessary, the source files (STEP, IGS, etc), the links/datasheets/drawings or other information used to create the library part.
[x] File imported using the Creo start part commercial.
[x] Checked mass properties.
[x] Checked if one special case applies to this component.
[x] Converted the files with the EDU-COM license.
[x] Created IIT code in WINGST with manufacturer and at least one supplier.

Lawproto commented 2 years ago

Checklist complete. Item added to cad-libraries and WinGST. Closing.

fiorisi commented 2 years ago

@Lawproto did you use the correct start part? https://github.com/icub-tech-iit/cad-libraries/wiki/Mechanical-design-guidelines#standard-part-for-commercial-components

Lawproto commented 2 years ago

@Lawproto did you use the correct start part? https://github.com/icub-tech-iit/cad-libraries/wiki/Mechanical-design-guidelines#standard-part-for-commercial-components

No, I simply assigned the Iglidur material to the default start part in this case.

fiorisi commented 2 years ago

No, I simply assigned the Iglidur material to the default start part in this case.

Ok, then simply remove these parameters from the part.

Lawproto commented 2 years ago

I see your point, @fiorisi. Fixed that.

icub-tech-iit / cad-libraries