Closed lhj12 closed 9 months ago
alfoa
commented
4 years ago @lhj12 Hi,Can you attach your XML input file? I am not able to understand what the issue is... Can RELAP run that case in standalone? What is the output of the log file in the sample directory?
lhj12
commented
4 years ago HI,dear First thank you for your help. My xml input file attach to appendices. Thanks, Liu
发送自 Windows 10 版邮件应用
发件人: Andrea Alfonsi - INL 发送时间: 2020年7月8日 2:36 收件人: idaholab/raven 抄送: lhj12; Mention 主题: Re: [idaholab/raven] Process Failed (#1263)
@lhj12 Hi,Can you attach your XML input file? I am not able to understand what the issue is... Can RELAP run that case in standalone? What is the output of the log file in the sample directory? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.
CONDA raven_libraries C:\Users\lhj.conda\envs\raven_libraries Running RAVEN in "opt" mode. PluginFactory: No installed plugins detected. ERROR adding checked and unchecked to lowerBound in UniformDiscrete len 1 ERROR adding checked and unchecked to upperBound in UniformDiscrete len 1 ERROR adding checked and unchecked to lowerBound in LogUniform len 1 ERROR adding checked and unchecked to upperBound in LogUniform len 1
.---. .------###### ##### ### ### ######## ### ###
/ \ __ / --### ### ### ### ### ### ### ##### ###
/ / \( )/ --### ### ### ### ### ### ###### ### ######
////// ' \/ ` --####### ######### ### ### ### ### #####
//// / // : : -### ### ### ### ###### #### ### ####
// / / /` '---### ### ### ### ### ######## ### ###
// //..\
===========UU====UU=============================================================
'//||\`
''``
Copyright 2017 Battelle Energy Alliance, LLC
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
RAVEN Python dependencies located and checked.
( 1.05 sec) SIMULATION : Message -> Simulation started at 2020-07-08 08:57:31
( 1.05 sec) SIMULATION : Message -> Global verbosity level is " debug "
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: RunInfo --
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Files --
( 1.05 sec) SIMULATION : DEBUG -> Reading type Input with name tpfh2o
( 1.05 sec) input File : DEBUG -> ------Reading Completed for:
( 1.05 sec) input File : DEBUG -> Class : UserGenerated from <class 'Files.File'>
( 1.05 sec) input File : DEBUG -> Type : input
( 1.05 sec) input File : DEBUG -> Name : tpfh2o
( 1.05 sec) input File : DEBUG -> Initialization Parameters:
( 1.05 sec) input File : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> Reading type Input with name C:\Users\lhj\Desktop\Case1\Case1.i
( 1.05 sec) input File : DEBUG -> ------Reading Completed for:
( 1.05 sec) input File : DEBUG -> Class : UserGenerated from <class 'Files.File'>
( 1.05 sec) input File : DEBUG -> Type : input
( 1.05 sec) input File : DEBUG -> Name : C:\Users\lhj\Desktop\Case1\Case1.i
( 1.05 sec) input File : DEBUG -> Initialization Parameters:
( 1.05 sec) input File : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Models --
( 1.05 sec) SIMULATION : DEBUG -> Reading type Code with name MyRELAP
( 1.05 sec) Code : Warning -> "text" nodes only accept "type" and "arg" attributes! Ignoring "delimiter"...
( 1.05 sec) Code : DEBUG -> ------Reading Completed for:
( 1.05 sec) Code : DEBUG -> Class : Code from <class 'Models.Model.Model'>
( 1.05 sec) Code : DEBUG -> Type : Code
( 1.05 sec) Code : DEBUG -> Name : MyRELAP
( 1.05 sec) Code : DEBUG -> Initialization Parameters:
( 1.05 sec) Code : DEBUG -> subType : Relap5
( 1.05 sec) Code : DEBUG -> executable : C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe
( 1.05 sec) Code : DEBUG -> Current Setting:
( 1.05 sec) Code : DEBUG -> current working directory:
( 1.05 sec) Code : DEBUG -> current output file root:
( 1.05 sec) Code : DEBUG -> current input file: []
( 1.05 sec) Code : DEBUG -> original input file: []
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Distributions --
( 1.05 sec) DISTRIBUTIONS : DEBUG -> ------Reading Completed for:
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Class : Normal from <class 'Distributions.BoostDistribution'>
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Type : Normal
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Name : area
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Initialization Parameters:
( 1.05 sec) DISTRIBUTIONS : DEBUG -> upperBoundUsed : False
( 1.05 sec) DISTRIBUTIONS : DEBUG -> lowerBoundUsed : False
( 1.05 sec) DISTRIBUTIONS : DEBUG -> hasInfiniteBound: True
( 1.05 sec) DISTRIBUTIONS : DEBUG -> upperBound : 1.7976931348623157e+308
( 1.05 sec) DISTRIBUTIONS : DEBUG -> lowerBound : -1.7976931348623157e+308
( 1.05 sec) DISTRIBUTIONS : DEBUG -> adjustmentType :
( 1.05 sec) DISTRIBUTIONS : DEBUG -> dimensionality : 1
( 1.05 sec) DISTRIBUTIONS : DEBUG -> messageHandler : <MessageHandler.MessageHandler object at 0x000002BDD3A47E48>
( 1.05 sec) DISTRIBUTIONS : DEBUG -> mean : 7.85398e-05
( 1.05 sec) DISTRIBUTIONS : DEBUG -> sigma : 1e-06
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Samplers --
( 1.05 sec) SIMULATION : DEBUG -> Reading type MonteCarlo with name MC_Sampler
( 1.05 sec) SAMPLER MONTECARLO : DEBUG -> Set verbosity for <Samplers.MonteCarlo.MonteCarlo object at 0x000002BDD3A4FFC8> to debug
( 1.05 sec) MonteCarlo : DEBUG -> ------Reading Completed for:
( 1.05 sec) MonteCarlo : DEBUG -> Class : MonteCarlo from <class 'Samplers.ForwardSampler.ForwardSampler'>
( 1.05 sec) MonteCarlo : DEBUG -> Type : MonteCarlo
( 1.05 sec) MonteCarlo : DEBUG -> Name : MC_Sampler
( 1.05 sec) MonteCarlo : DEBUG -> Initialization Parameters:
( 1.05 sec) MonteCarlo : DEBUG -> sampled variable: 1100101:2: is sampled using the distribution area
( 1.05 sec) MonteCarlo : DEBUG -> limit : 2
( 1.05 sec) MonteCarlo : DEBUG -> initial seed : 10
( 1.05 sec) MonteCarlo : DEBUG -> Current Setting:
( 1.05 sec) MonteCarlo : DEBUG -> counter : 0
( 1.05 sec) MonteCarlo : DEBUG -> initial seed : 10
( 1.05 sec) MonteCarlo : DEBUG -> SampledVarsPb : {}
( 1.05 sec) MonteCarlo : DEBUG -> crowDist : {}
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Steps --
( 1.05 sec) SIMULATION : DEBUG -> Reading type MultiRun with name MC_Sampler
( 1.05 sec) STEP MULTIRUN : DEBUG -> Set verbosity for <Steps.MultiRun object at 0x000002BDD3A4D7C8> to debug
( 1.05 sec) STEP MULTIRUN : DEBUG -> move this tests to base class when it is ready for all the classes
( 1.05 sec) STEP MULTIRUN : DEBUG -> the mapping used in the model for checking the compatibility of usage should be more similar to self.parList to avoid the double mapping below FIXME
( 1.05 sec) STEP MULTIRUN : DEBUG -> reactivate check on Input as soon as loadCsv gets out from the PostProcessor models!
( 1.05 sec) STEP MULTIRUN : DEBUG -> ------Reading Completed for:
( 1.05 sec) STEP MULTIRUN : DEBUG -> Class : MultiRun from <class 'Steps.SingleRun'>
( 1.05 sec) STEP MULTIRUN : DEBUG -> Type : MultiRun
( 1.05 sec) STEP MULTIRUN : DEBUG -> Name : MC_Sampler
( 1.05 sec) STEP MULTIRUN : DEBUG -> Initialization Parameters:
( 1.05 sec) STEP MULTIRUN : DEBUG -> Sleep time : 0.005
( 1.05 sec) STEP MULTIRUN : DEBUG -> Initial seed : None
( 1.05 sec) STEP MULTIRUN : DEBUG -> Input : Class: Files Type: input Global name: tpfh2o
( 1.05 sec) STEP MULTIRUN : DEBUG -> Model : Class: Models Type: Code Global name: MyRELAP
( 1.05 sec) STEP MULTIRUN : DEBUG -> Sampler : Class: Samplers Type: MonteCarlo Global name: MC_Sampler
( 1.05 sec) STEP MULTIRUN : DEBUG -> Output : Class: Databases Type: HDF5 Global name: MC_out
( 1.05 sec) STEP MULTIRUN : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Databases --
( 1.05 sec) DATABASE HDF5 : DEBUG -> HDF5 Read Mode is "overwrite".
( 1.06 sec) DATABASE HDF5 : Message -> Database is located at: C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\DatabaseStorage\MC_out.h5
( 1.06 sec) DATABASE HDF5 : DEBUG -> ------Reading Completed for:
( 1.06 sec) DATABASE HDF5 : DEBUG -> Class : HDF5 from <class 'Databases.DateBase'>
( 1.06 sec) DATABASE HDF5 : DEBUG -> Type : HDF5
( 1.06 sec) DATABASE HDF5 : DEBUG -> Name : MC_out
( 1.06 sec) DATABASE HDF5 : DEBUG -> Initialization Parameters:
( 1.06 sec) DATABASE HDF5 : DEBUG -> exist : False
( 1.06 sec) DATABASE HDF5 : DEBUG -> Current Setting:
( 1.06 sec) SIMULATION : DEBUG -> Moving to working directory: C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5
( 1.06 sec) Job Handler : DEBUG -> Setting maxQueueSize to 1
( 1.06 sec) SIMULATION : DEBUG -> entering the run
( 1.06 sec) SIMULATION : Message -> -- Beginning step MC_Sampler of type: MultiRun --
( 1.06 sec) STEP MULTIRUN : Message -> *** Beginning initialization ***
( 1.06 sec) STEP MULTIRUN : DEBUG -> jobHandler initialized
( 1.06 sec) STEP MULTIRUN : Warning -> current working dir C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\MC_Sampler already exists, this might imply deletion of present files
( 1.06 sec) STEP MULTIRUN : DEBUG -> for the role Model the item of class Code and name MyRELAP has been initialized
( 1.06 sec) STEP MULTIRUN : DEBUG -> for the role Output the item of class HDF5 and name MC_out has been initialized
( 1.06 sec) MonteCarlo : Message -> No restart for MonteCarlo
( 1.06 sec) STEP MULTIRUN : DEBUG -> for the role of sampler the item of class MonteCarlo and name MC_Sampler has been initialized
( 1.06 sec) STEP MULTIRUN : DEBUG -> Sampler initialization dictionary: {'externalSeeding': None}
( 1.06 sec) STEP MULTIRUN : DEBUG -> Generating input batch of size 1
( 1.06 sec) MonteCarlo : DEBUG -> ... Sample point 1: {'1100101:2': 7.9283003122218053e-05}
( 1.06 sec) Code : Message -> job "1" submitted!
( 1.06 sec) STEP MULTIRUN : DEBUG -> Submitted input 1
( 1.06 sec) STEP MULTIRUN : Message -> *** Initialization done ***
( 1.06 sec) STEP MULTIRUN : Message -> *** Beginning run ***
( 1.07 sec) Code : Message -> Execution command submitted: C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r
( 1.07 sec) Code : Message -> modified command to 'C:\\Users\\lhj\\Desktop\\RELAP\\RELAP5_TMSR_v1_beta_run\\relap5.exe -i Case1.i -o out~Case1.o -r C:\\Users\\lhj\\Desktop\\Case1\\Case1.r '
( 7.45 sec) Code : Message -> Process Failed C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r returnCode -1
( 7.45 sec) Code : Message -> ''
( 7.46 sec) Job Handler : Message -> Process Failed <Runners.SharedMemoryRunner.SharedMemoryRunner object at 0x000002BDD3A928C8> internal returnCode -1
( 7.46 sec) STEP MULTIRUN : DEBUG -> the job "1" has failed.
( 7.46 sec) STEP MULTIRUN : DEBUG -> Testing if the sampler is ready to generate a new input
( 7.46 sec) MonteCarlo : DEBUG -> Sampling limit reached!
( 7.46 sec) MonteCarlo : DEBUG -> ... Sample point 2: {'1100101:2': 7.7625462227225587e-05}
( 7.46 sec) Code : Message -> job "2" submitted!
( 7.46 sec) Code : Message -> Execution command submitted: C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r
( 7.46 sec) Code : Message -> modified command to 'C:\\Users\\lhj\\Desktop\\RELAP\\RELAP5_TMSR_v1_beta_run\\relap5.exe -i Case1.i -o out~Case1.o -r C:\\Users\\lhj\\Desktop\\Case1\\Case1.r '
( 8.52 sec) Code : Message -> Process Failed C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r returnCode -1
( 8.52 sec) Code : Message -> ''
( 8.52 sec) Job Handler : Message -> Process Failed <Runners.SharedMemoryRunner.SharedMemoryRunner object at 0x000002BDD3A92D88> internal returnCode -1
( 8.52 sec) STEP MULTIRUN : DEBUG -> the job "2" has failed.
( 8.52 sec) STEP MULTIRUN : DEBUG -> Testing if the sampler is ready to generate a new input
( 8.52 sec) MonteCarlo : DEBUG -> Sampling limit reached! No new samples ...
( 8.52 sec) STEP MULTIRUN : DEBUG -> ... sampler has no new inputs currently.
( 8.52 sec) MonteCarlo : DEBUG -> Sampling limit reached! No new samples ...
( 8.52 sec) STEP MULTIRUN : DEBUG -> Sampling finished with 2 runs submitted, 0 jobs running, and 0 completed jobs waiting to be processed.
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) MonteCarlo : DEBUG -> | RUN SUMMARY |
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) MonteCarlo : Warning -> There were 2 failed runs! Run with verbosity = debug for more details.
( 8.52 sec) MonteCarlo : DEBUG -> Run number 1 FAILED:
( 8.52 sec) MonteCarlo : DEBUG -> return code : -1
( 8.52 sec) MonteCarlo : DEBUG -> Run number 2 FAILED:
( 8.52 sec) MonteCarlo : DEBUG -> return code : -1
( 8.52 sec) MonteCarlo : DEBUG -> Continuing with reduced-size Monte-Carlo sampling.
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) MonteCarlo : DEBUG -> END SUMMARY
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) STEP MULTIRUN : Message -> *** Run finished ***
( 8.52 sec) STEP MULTIRUN : Message -> *** Closing the step ***
( 8.52 sec) STEP MULTIRUN : Message -> *** Step closed ***
( 8.52 sec) SIMULATION : Message -> -- End step MC_Sampler of type: MultiRun --
--------------------------------------------------
There were 3 warnings during the simulation run:
(1 time) "text" nodes only accept "type" and "arg" attributes! Ignoring "delimiter"...
(1 time) There were 2 failed runs! Run with verbosity = debug for more details.
(1 time) current working dir C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\MC_Sampler already exists, this might imply deletion of present files
--------------------------------------------------
( 8.52 sec) SIMULATION : Message -> Run complete!This is my XML input file.
发送自 Windows 10 版邮件应用
发件人: Andrea Alfonsi - INL 发送时间: 2020年7月8日 2:36 主题: Re: [idaholab/raven] Process Failed (#1263)
@lhj12 Hi,Can you attach your XML input file? I am not able to understand what the issue is... Can RELAP run that case in standalone? What is the output of the log file in the sample directory? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.
<?xml version="1.0" ?>
C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe
1
%card% *1100101:2
1101201:2
CONDA raven_libraries C:\Users\lhj.conda\envs\raven_libraries Running RAVEN in "opt" mode. PluginFactory: No installed plugins detected. ERROR adding checked and unchecked to lowerBound in UniformDiscrete len 1 ERROR adding checked and unchecked to upperBound in UniformDiscrete len 1 ERROR adding checked and unchecked to lowerBound in LogUniform len 1 ERROR adding checked and unchecked to upperBound in LogUniform len 1
.---. .------###### ##### ### ### ######## ### ###
/ \ __ / --### ### ### ### ### ### ### ##### ###
/ / \( )/ --### ### ### ### ### ### ###### ### ######
////// ' \/ ` --####### ######### ### ### ### ### #####
//// / // : : -### ### ### ### ###### #### ### ####
// / / /` '---### ### ### ### ### ######## ### ###
// //..\
===========UU====UU=============================================================
'//||\`
''``
Copyright 2017 Battelle Energy Alliance, LLC
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
RAVEN Python dependencies located and checked.
( 1.05 sec) SIMULATION : Message -> Simulation started at 2020-07-08 08:57:31
( 1.05 sec) SIMULATION : Message -> Global verbosity level is " debug "
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: RunInfo --
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Files --
( 1.05 sec) SIMULATION : DEBUG -> Reading type Input with name tpfh2o
( 1.05 sec) input File : DEBUG -> ------Reading Completed for:
( 1.05 sec) input File : DEBUG -> Class : UserGenerated from <class 'Files.File'>
( 1.05 sec) input File : DEBUG -> Type : input
( 1.05 sec) input File : DEBUG -> Name : tpfh2o
( 1.05 sec) input File : DEBUG -> Initialization Parameters:
( 1.05 sec) input File : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> Reading type Input with name C:\Users\lhj\Desktop\Case1\Case1.i
( 1.05 sec) input File : DEBUG -> ------Reading Completed for:
( 1.05 sec) input File : DEBUG -> Class : UserGenerated from <class 'Files.File'>
( 1.05 sec) input File : DEBUG -> Type : input
( 1.05 sec) input File : DEBUG -> Name : C:\Users\lhj\Desktop\Case1\Case1.i
( 1.05 sec) input File : DEBUG -> Initialization Parameters:
( 1.05 sec) input File : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Models --
( 1.05 sec) SIMULATION : DEBUG -> Reading type Code with name MyRELAP
( 1.05 sec) Code : Warning -> "text" nodes only accept "type" and "arg" attributes! Ignoring "delimiter"...
( 1.05 sec) Code : DEBUG -> ------Reading Completed for:
( 1.05 sec) Code : DEBUG -> Class : Code from <class 'Models.Model.Model'>
( 1.05 sec) Code : DEBUG -> Type : Code
( 1.05 sec) Code : DEBUG -> Name : MyRELAP
( 1.05 sec) Code : DEBUG -> Initialization Parameters:
( 1.05 sec) Code : DEBUG -> subType : Relap5
( 1.05 sec) Code : DEBUG -> executable : C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe
( 1.05 sec) Code : DEBUG -> Current Setting:
( 1.05 sec) Code : DEBUG -> current working directory:
( 1.05 sec) Code : DEBUG -> current output file root:
( 1.05 sec) Code : DEBUG -> current input file: []
( 1.05 sec) Code : DEBUG -> original input file: []
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Distributions --
( 1.05 sec) DISTRIBUTIONS : DEBUG -> ------Reading Completed for:
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Class : Normal from <class 'Distributions.BoostDistribution'>
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Type : Normal
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Name : area
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Initialization Parameters:
( 1.05 sec) DISTRIBUTIONS : DEBUG -> upperBoundUsed : False
( 1.05 sec) DISTRIBUTIONS : DEBUG -> lowerBoundUsed : False
( 1.05 sec) DISTRIBUTIONS : DEBUG -> hasInfiniteBound: True
( 1.05 sec) DISTRIBUTIONS : DEBUG -> upperBound : 1.7976931348623157e+308
( 1.05 sec) DISTRIBUTIONS : DEBUG -> lowerBound : -1.7976931348623157e+308
( 1.05 sec) DISTRIBUTIONS : DEBUG -> adjustmentType :
( 1.05 sec) DISTRIBUTIONS : DEBUG -> dimensionality : 1
( 1.05 sec) DISTRIBUTIONS : DEBUG -> messageHandler : <MessageHandler.MessageHandler object at 0x000002BDD3A47E48>
( 1.05 sec) DISTRIBUTIONS : DEBUG -> mean : 7.85398e-05
( 1.05 sec) DISTRIBUTIONS : DEBUG -> sigma : 1e-06
( 1.05 sec) DISTRIBUTIONS : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Samplers --
( 1.05 sec) SIMULATION : DEBUG -> Reading type MonteCarlo with name MC_Sampler
( 1.05 sec) SAMPLER MONTECARLO : DEBUG -> Set verbosity for <Samplers.MonteCarlo.MonteCarlo object at 0x000002BDD3A4FFC8> to debug
( 1.05 sec) MonteCarlo : DEBUG -> ------Reading Completed for:
( 1.05 sec) MonteCarlo : DEBUG -> Class : MonteCarlo from <class 'Samplers.ForwardSampler.ForwardSampler'>
( 1.05 sec) MonteCarlo : DEBUG -> Type : MonteCarlo
( 1.05 sec) MonteCarlo : DEBUG -> Name : MC_Sampler
( 1.05 sec) MonteCarlo : DEBUG -> Initialization Parameters:
( 1.05 sec) MonteCarlo : DEBUG -> sampled variable: 1100101:2: is sampled using the distribution area
( 1.05 sec) MonteCarlo : DEBUG -> limit : 2
( 1.05 sec) MonteCarlo : DEBUG -> initial seed : 10
( 1.05 sec) MonteCarlo : DEBUG -> Current Setting:
( 1.05 sec) MonteCarlo : DEBUG -> counter : 0
( 1.05 sec) MonteCarlo : DEBUG -> initial seed : 10
( 1.05 sec) MonteCarlo : DEBUG -> SampledVarsPb : {}
( 1.05 sec) MonteCarlo : DEBUG -> crowDist : {}
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Steps --
( 1.05 sec) SIMULATION : DEBUG -> Reading type MultiRun with name MC_Sampler
( 1.05 sec) STEP MULTIRUN : DEBUG -> Set verbosity for <Steps.MultiRun object at 0x000002BDD3A4D7C8> to debug
( 1.05 sec) STEP MULTIRUN : DEBUG -> move this tests to base class when it is ready for all the classes
( 1.05 sec) STEP MULTIRUN : DEBUG -> the mapping used in the model for checking the compatibility of usage should be more similar to self.parList to avoid the double mapping below FIXME
( 1.05 sec) STEP MULTIRUN : DEBUG -> reactivate check on Input as soon as loadCsv gets out from the PostProcessor models!
( 1.05 sec) STEP MULTIRUN : DEBUG -> ------Reading Completed for:
( 1.05 sec) STEP MULTIRUN : DEBUG -> Class : MultiRun from <class 'Steps.SingleRun'>
( 1.05 sec) STEP MULTIRUN : DEBUG -> Type : MultiRun
( 1.05 sec) STEP MULTIRUN : DEBUG -> Name : MC_Sampler
( 1.05 sec) STEP MULTIRUN : DEBUG -> Initialization Parameters:
( 1.05 sec) STEP MULTIRUN : DEBUG -> Sleep time : 0.005
( 1.05 sec) STEP MULTIRUN : DEBUG -> Initial seed : None
( 1.05 sec) STEP MULTIRUN : DEBUG -> Input : Class: Files Type: input Global name: tpfh2o
( 1.05 sec) STEP MULTIRUN : DEBUG -> Model : Class: Models Type: Code Global name: MyRELAP
( 1.05 sec) STEP MULTIRUN : DEBUG -> Sampler : Class: Samplers Type: MonteCarlo Global name: MC_Sampler
( 1.05 sec) STEP MULTIRUN : DEBUG -> Output : Class: Databases Type: HDF5 Global name: MC_out
( 1.05 sec) STEP MULTIRUN : DEBUG -> Current Setting:
( 1.05 sec) SIMULATION : DEBUG -> -- Reading the block: Databases --
( 1.05 sec) DATABASE HDF5 : DEBUG -> HDF5 Read Mode is "overwrite".
( 1.06 sec) DATABASE HDF5 : Message -> Database is located at: C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\DatabaseStorage\MC_out.h5
( 1.06 sec) DATABASE HDF5 : DEBUG -> ------Reading Completed for:
( 1.06 sec) DATABASE HDF5 : DEBUG -> Class : HDF5 from <class 'Databases.DateBase'>
( 1.06 sec) DATABASE HDF5 : DEBUG -> Type : HDF5
( 1.06 sec) DATABASE HDF5 : DEBUG -> Name : MC_out
( 1.06 sec) DATABASE HDF5 : DEBUG -> Initialization Parameters:
( 1.06 sec) DATABASE HDF5 : DEBUG -> exist : False
( 1.06 sec) DATABASE HDF5 : DEBUG -> Current Setting:
( 1.06 sec) SIMULATION : DEBUG -> Moving to working directory: C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5
( 1.06 sec) Job Handler : DEBUG -> Setting maxQueueSize to 1
( 1.06 sec) SIMULATION : DEBUG -> entering the run
( 1.06 sec) SIMULATION : Message -> -- Beginning step MC_Sampler of type: MultiRun --
( 1.06 sec) STEP MULTIRUN : Message -> *** Beginning initialization ***
( 1.06 sec) STEP MULTIRUN : DEBUG -> jobHandler initialized
( 1.06 sec) STEP MULTIRUN : Warning -> current working dir C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\MC_Sampler already exists, this might imply deletion of present files
( 1.06 sec) STEP MULTIRUN : DEBUG -> for the role Model the item of class Code and name MyRELAP has been initialized
( 1.06 sec) STEP MULTIRUN : DEBUG -> for the role Output the item of class HDF5 and name MC_out has been initialized
( 1.06 sec) MonteCarlo : Message -> No restart for MonteCarlo
( 1.06 sec) STEP MULTIRUN : DEBUG -> for the role of sampler the item of class MonteCarlo and name MC_Sampler has been initialized
( 1.06 sec) STEP MULTIRUN : DEBUG -> Sampler initialization dictionary: {'externalSeeding': None}
( 1.06 sec) STEP MULTIRUN : DEBUG -> Generating input batch of size 1
( 1.06 sec) MonteCarlo : DEBUG -> ... Sample point 1: {'1100101:2': 7.9283003122218053e-05}
( 1.06 sec) Code : Message -> job "1" submitted!
( 1.06 sec) STEP MULTIRUN : DEBUG -> Submitted input 1
( 1.06 sec) STEP MULTIRUN : Message -> *** Initialization done ***
( 1.06 sec) STEP MULTIRUN : Message -> *** Beginning run ***
( 1.07 sec) Code : Message -> Execution command submitted: C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r
( 1.07 sec) Code : Message -> modified command to 'C:\\Users\\lhj\\Desktop\\RELAP\\RELAP5_TMSR_v1_beta_run\\relap5.exe -i Case1.i -o out~Case1.o -r C:\\Users\\lhj\\Desktop\\Case1\\Case1.r '
( 7.45 sec) Code : Message -> Process Failed C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r returnCode -1
( 7.45 sec) Code : Message -> ''
( 7.46 sec) Job Handler : Message -> Process Failed <Runners.SharedMemoryRunner.SharedMemoryRunner object at 0x000002BDD3A928C8> internal returnCode -1
( 7.46 sec) STEP MULTIRUN : DEBUG -> the job "1" has failed.
( 7.46 sec) STEP MULTIRUN : DEBUG -> Testing if the sampler is ready to generate a new input
( 7.46 sec) MonteCarlo : DEBUG -> Sampling limit reached!
( 7.46 sec) MonteCarlo : DEBUG -> ... Sample point 2: {'1100101:2': 7.7625462227225587e-05}
( 7.46 sec) Code : Message -> job "2" submitted!
( 7.46 sec) Code : Message -> Execution command submitted: C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r
( 7.46 sec) Code : Message -> modified command to 'C:\\Users\\lhj\\Desktop\\RELAP\\RELAP5_TMSR_v1_beta_run\\relap5.exe -i Case1.i -o out~Case1.o -r C:\\Users\\lhj\\Desktop\\Case1\\Case1.r '
( 8.52 sec) Code : Message -> Process Failed C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r C:\Users\lhj\Desktop\Case1\Case1.r returnCode -1
( 8.52 sec) Code : Message -> ''
( 8.52 sec) Job Handler : Message -> Process Failed <Runners.SharedMemoryRunner.SharedMemoryRunner object at 0x000002BDD3A92D88> internal returnCode -1
( 8.52 sec) STEP MULTIRUN : DEBUG -> the job "2" has failed.
( 8.52 sec) STEP MULTIRUN : DEBUG -> Testing if the sampler is ready to generate a new input
( 8.52 sec) MonteCarlo : DEBUG -> Sampling limit reached! No new samples ...
( 8.52 sec) STEP MULTIRUN : DEBUG -> ... sampler has no new inputs currently.
( 8.52 sec) MonteCarlo : DEBUG -> Sampling limit reached! No new samples ...
( 8.52 sec) STEP MULTIRUN : DEBUG -> Sampling finished with 2 runs submitted, 0 jobs running, and 0 completed jobs waiting to be processed.
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) MonteCarlo : DEBUG -> | RUN SUMMARY |
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) MonteCarlo : Warning -> There were 2 failed runs! Run with verbosity = debug for more details.
( 8.52 sec) MonteCarlo : DEBUG -> Run number 1 FAILED:
( 8.52 sec) MonteCarlo : DEBUG -> return code : -1
( 8.52 sec) MonteCarlo : DEBUG -> Run number 2 FAILED:
( 8.52 sec) MonteCarlo : DEBUG -> return code : -1
( 8.52 sec) MonteCarlo : DEBUG -> Continuing with reduced-size Monte-Carlo sampling.
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) MonteCarlo : DEBUG -> END SUMMARY
( 8.52 sec) MonteCarlo : DEBUG -> ===============
( 8.52 sec) STEP MULTIRUN : Message -> *** Run finished ***
( 8.52 sec) STEP MULTIRUN : Message -> *** Closing the step ***
( 8.52 sec) STEP MULTIRUN : Message -> *** Step closed ***
( 8.52 sec) SIMULATION : Message -> -- End step MC_Sampler of type: MultiRun --
--------------------------------------------------
There were 3 warnings during the simulation run:
(1 time) "text" nodes only accept "type" and "arg" attributes! Ignoring "delimiter"...
(1 time) There were 2 failed runs! Run with verbosity = debug for more details.
(1 time) current working dir C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\MC_Sampler already exists, this might imply deletion of present files
--------------------------------------------------
( 8.52 sec) SIMULATION : Message -> Run complete!Hi, When I run the case(Case1.i) usr RELAP5 is a successful case.There are all the files
发送自 Windows 10 版邮件应用
发件人: Andrea Alfonsi - INL 发送时间: 2020年7月8日 2:36 主题: Re: [idaholab/raven] Process Failed (#1263)
@lhj12 Hi,Can you attach your XML input file? I am not able to understand what the issue is... Can RELAP run that case in standalone? What is the output of the log file in the sample directory? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.
CONDA raven_libraries C:\Users\lhj.conda\envs\raven_libraries Running RAVEN in "opt" mode. PluginFactory: No installed plugins detected. ERROR adding checked and unchecked to lowerBound in UniformDiscrete len 1 ERROR adding checked and unchecked to upperBound in UniformDiscrete len 1 ERROR adding checked and unchecked to lowerBound in LogUniform len 1 ERROR adding checked and unchecked to upperBound in LogUniform len 1
.---. .------###### ##### ### ### ######## ### ###
/ \ __ / --### ### ### ### ### ### ### ##### ###
/ / \( )/ --### ### ### ### ### ### ###### ### ######
////// ' \/ ` --####### ######### ### ### ### ### #####
//// / // : : -### ### ### ### ###### #### ### ####
// / / /` '---### ### ### ### ### ######## ### ###
// //..\
===========UU====UU=============================================================
'//||\`
''``
Copyright 2017 Battelle Energy Alliance, LLC
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
RAVEN Python dependencies located and checked.
( 1.09 sec) SIMULATION : Message -> Simulation started at 2020-07-10 16:00:05
( 1.09 sec) SIMULATION : Message -> Global verbosity level is " debug "
( 1.09 sec) SIMULATION : DEBUG -> -- Reading the block: RunInfo --
( 1.09 sec) SIMULATION : DEBUG -> -- Reading the block: Files --
( 1.09 sec) SIMULATION : DEBUG -> Reading type Input with name Case1.i
( 1.09 sec) input File : DEBUG -> ------Reading Completed for:
( 1.09 sec) input File : DEBUG -> Class : UserGenerated from <class 'Files.File'>
( 1.09 sec) input File : DEBUG -> Type : input
( 1.09 sec) input File : DEBUG -> Name : Case1.i
( 1.09 sec) input File : DEBUG -> Initialization Parameters:
( 1.09 sec) input File : DEBUG -> Current Setting:
( 1.09 sec) SIMULATION : DEBUG -> Reading type Input with name tpfh2o
( 1.09 sec) File : DEBUG -> ------Reading Completed for:
( 1.09 sec) File : DEBUG -> Class : UserGenerated from <class 'Files.File'>
( 1.09 sec) File : DEBUG -> Type :
( 1.09 sec) File : DEBUG -> Name : tpfh2o
( 1.09 sec) File : DEBUG -> Initialization Parameters:
( 1.09 sec) File : DEBUG -> Current Setting:
( 1.09 sec) SIMULATION : DEBUG -> -- Reading the block: Models --
( 1.09 sec) SIMULATION : DEBUG -> Reading type Code with name MyRELAP
( 1.09 sec) Code : DEBUG -> ------Reading Completed for:
( 1.09 sec) Code : DEBUG -> Class : Code from <class 'Models.Model.Model'>
( 1.09 sec) Code : DEBUG -> Type : Code
( 1.09 sec) Code : DEBUG -> Name : MyRELAP
( 1.09 sec) Code : DEBUG -> Initialization Parameters:
( 1.09 sec) Code : DEBUG -> subType : Relap5
( 1.09 sec) Code : DEBUG -> executable : C:\Users\lhj\Desktop\Case1\relap5.exe
( 1.09 sec) Code : DEBUG -> Current Setting:
( 1.09 sec) Code : DEBUG -> current working directory:
( 1.09 sec) Code : DEBUG -> current output file root:
( 1.09 sec) Code : DEBUG -> current input file: []
( 1.09 sec) Code : DEBUG -> original input file: []
( 1.09 sec) SIMULATION : DEBUG -> -- Reading the block: Distributions --
( 1.09 sec) DISTRIBUTIONS : DEBUG -> ------Reading Completed for:
( 1.09 sec) DISTRIBUTIONS : DEBUG -> Class : Normal from <class 'Distributions.BoostDistribution'>
( 1.09 sec) DISTRIBUTIONS : DEBUG -> Type : Normal
( 1.09 sec) DISTRIBUTIONS : DEBUG -> Name : area
( 1.09 sec) DISTRIBUTIONS : DEBUG -> Initialization Parameters:
( 1.09 sec) DISTRIBUTIONS : DEBUG -> upperBoundUsed : False
( 1.09 sec) DISTRIBUTIONS : DEBUG -> lowerBoundUsed : False
( 1.09 sec) DISTRIBUTIONS : DEBUG -> hasInfiniteBound: True
( 1.09 sec) DISTRIBUTIONS : DEBUG -> upperBound : 1.7976931348623157e+308
( 1.09 sec) DISTRIBUTIONS : DEBUG -> lowerBound : -1.7976931348623157e+308
( 1.09 sec) DISTRIBUTIONS : DEBUG -> adjustmentType :
( 1.09 sec) DISTRIBUTIONS : DEBUG -> dimensionality : 1
( 1.09 sec) DISTRIBUTIONS : DEBUG -> messageHandler : <MessageHandler.MessageHandler object at 0x000001EDDD139CC8>
( 1.09 sec) DISTRIBUTIONS : DEBUG -> mean : 7.85398e-05
( 1.09 sec) DISTRIBUTIONS : DEBUG -> sigma : 1e-06
( 1.09 sec) DISTRIBUTIONS : DEBUG -> Current Setting:
( 1.09 sec) SIMULATION : DEBUG -> -- Reading the block: Samplers --
( 1.09 sec) SIMULATION : DEBUG -> Reading type MonteCarlo with name MC_Sampler
( 1.10 sec) MonteCarlo : DEBUG -> ------Reading Completed for:
( 1.10 sec) MonteCarlo : DEBUG -> Class : MonteCarlo from <class 'Samplers.ForwardSampler.ForwardSampler'>
( 1.10 sec) MonteCarlo : DEBUG -> Type : MonteCarlo
( 1.10 sec) MonteCarlo : DEBUG -> Name : MC_Sampler
( 1.10 sec) MonteCarlo : DEBUG -> Initialization Parameters:
( 1.10 sec) MonteCarlo : DEBUG -> sampled variable: 1100101:2: is sampled using the distribution area
( 1.10 sec) MonteCarlo : DEBUG -> limit : 2
( 1.10 sec) MonteCarlo : DEBUG -> initial seed : 10
( 1.10 sec) MonteCarlo : DEBUG -> Current Setting:
( 1.10 sec) MonteCarlo : DEBUG -> counter : 0
( 1.10 sec) MonteCarlo : DEBUG -> initial seed : 10
( 1.10 sec) MonteCarlo : DEBUG -> SampledVarsPb : {}
( 1.10 sec) MonteCarlo : DEBUG -> crowDist : {}
( 1.10 sec) SIMULATION : DEBUG -> -- Reading the block: Steps --
( 1.10 sec) SIMULATION : DEBUG -> Reading type MultiRun with name MC_Sampler2
( 1.10 sec) STEP MULTIRUN : DEBUG -> move this tests to base class when it is ready for all the classes
( 1.10 sec) STEP MULTIRUN : DEBUG -> the mapping used in the model for checking the compatibility of usage should be more similar to self.parList to avoid the double mapping below FIXME
( 1.10 sec) STEP MULTIRUN : DEBUG -> reactivate check on Input as soon as loadCsv gets out from the PostProcessor models!
( 1.10 sec) STEP MULTIRUN : DEBUG -> ------Reading Completed for:
( 1.10 sec) STEP MULTIRUN : DEBUG -> Class : MultiRun from <class 'Steps.SingleRun'>
( 1.10 sec) STEP MULTIRUN : DEBUG -> Type : MultiRun
( 1.10 sec) STEP MULTIRUN : DEBUG -> Name : MC_Sampler2
( 1.10 sec) STEP MULTIRUN : DEBUG -> Initialization Parameters:
( 1.10 sec) STEP MULTIRUN : DEBUG -> Sleep time : 0.005
( 1.10 sec) STEP MULTIRUN : DEBUG -> Initial seed : 1
( 1.10 sec) STEP MULTIRUN : DEBUG -> Input : Class: Files Type: Global name: tpfh2o
( 1.10 sec) STEP MULTIRUN : DEBUG -> Model : Class: Models Type: Code Global name: MyRELAP
( 1.10 sec) STEP MULTIRUN : DEBUG -> Sampler : Class: Samplers Type: MonteCarlo Global name: MC_Sampler
( 1.10 sec) STEP MULTIRUN : DEBUG -> Output : Class: OutStreams Type: Print Global name: my_Results
( 1.10 sec) STEP MULTIRUN : DEBUG -> Current Setting:
( 1.10 sec) SIMULATION : DEBUG -> -- Reading the block: Databases --
( 1.10 sec) DATABASE HDF5 : DEBUG -> HDF5 Read Mode is "overwrite".
( 1.10 sec) DATABASE HDF5 : Message -> Database is located at: C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\DatabaseStorage\MC_out.h5
( 1.10 sec) DATABASE HDF5 : DEBUG -> ------Reading Completed for:
( 1.10 sec) DATABASE HDF5 : DEBUG -> Class : HDF5 from <class 'Databases.DateBase'>
( 1.10 sec) DATABASE HDF5 : DEBUG -> Type : HDF5
( 1.10 sec) DATABASE HDF5 : DEBUG -> Name : MC_out
( 1.10 sec) DATABASE HDF5 : DEBUG -> Initialization Parameters:
( 1.10 sec) DATABASE HDF5 : DEBUG -> exist : False
( 1.10 sec) DATABASE HDF5 : DEBUG -> Current Setting:
( 1.10 sec) SIMULATION : DEBUG -> -- Reading the block: DataObjects --
( 1.10 sec) SIMULATION : DEBUG -> Reading type PointSet with name Results
InputData: Using param spec "DataSet" to read XML node "PointSet.
( 1.10 sec) PointSet : DEBUG -> ------Reading Completed for:
( 1.10 sec) PointSet : DEBUG -> Class : PointSet from <class 'DataObjects.DataSet.DataSet'>
( 1.10 sec) PointSet : DEBUG -> Type : PointSet
( 1.10 sec) PointSet : DEBUG -> Name : Results
( 1.10 sec) PointSet : DEBUG -> Initialization Parameters:
( 1.10 sec) PointSet : DEBUG -> Current Setting:
( 1.10 sec) SIMULATION : DEBUG -> -- Reading the block: OutStreams --
( 1.10 sec) SIMULATION : DEBUG -> Reading type Print with name my_Results
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> ------Reading Completed for:
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Class : OutStreamPrint from <class 'OutStreams.OutStreamManager.OutStreamManager'>
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Type : OutStreamPrint
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Name : my_Results
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Initialization Parameters:
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Global Class Type : OutStreamManager
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Specialized Class Type : OutStreamPrint
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Overwrite output everytime called : True
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Source Name 0 :: Results
( 1.10 sec) OUTSTREAM MANAGER : DEBUG -> Current Setting:
( 1.10 sec) SIMULATION : DEBUG -> Moving to working directory: C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5
( 1.10 sec) Job Handler : DEBUG -> Setting maxQueueSize to 1
( 1.10 sec) SIMULATION : DEBUG -> entering the run
( 1.10 sec) SIMULATION : Message -> -- Beginning step MC_Sampler2 of type: MultiRun --
( 1.10 sec) STEP MULTIRUN : Message -> *** Beginning initialization ***
( 1.10 sec) STEP MULTIRUN : DEBUG -> jobHandler initialized
( 1.10 sec) STEP MULTIRUN : Warning -> current working dir C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\MC_Sampler2 already exists, this might imply deletion of present files
( 1.11 sec) STEP MULTIRUN : DEBUG -> for the role Model the item of class Code and name MyRELAP has been initialized
( 1.11 sec) STEP MULTIRUN : DEBUG -> for the role Output the item of class HDF5 and name MC_out has been initialized
( 1.11 sec) STEP MULTIRUN : DEBUG -> for the role Output the item of class PointSet and name Results has been initialized
( 1.11 sec) STEP MULTIRUN : DEBUG -> for the role Output the item of class OutStreamPrint and name my_Results has been initialized
( 1.11 sec) MonteCarlo : Message -> No restart for MonteCarlo
( 1.11 sec) STEP MULTIRUN : DEBUG -> for the role of sampler the item of class MonteCarlo and name MC_Sampler has been initialized
( 1.11 sec) STEP MULTIRUN : DEBUG -> Sampler initialization dictionary: {'externalSeeding': 1}
( 1.11 sec) STEP MULTIRUN : DEBUG -> Generating input batch of size 1
( 1.11 sec) MonteCarlo : DEBUG -> ... Sample point 1: {'1100101:2': 7.8330282143278864e-05}
( 1.11 sec) Code : Message -> job "1" submitted!
( 1.11 sec) STEP MULTIRUN : DEBUG -> Submitted input 1
( 1.11 sec) STEP MULTIRUN : Message -> *** Initialization done ***
( 1.11 sec) STEP MULTIRUN : Message -> *** Beginning run ***
( 1.12 sec) Code : Message -> Execution command submitted: C:\Users\lhj\Desktop\Case1\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r
( 1.12 sec) Code : Message -> modified command to 'C:\\Users\\lhj\\Desktop\\Case1\\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r '
( 1.14 sec) Code : Message -> Process Failed C:\Users\lhj\Desktop\Case1\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r returnCode 3221225781
( 1.14 sec) Code : Message -> ''
( 1.14 sec) Job Handler : Message -> Process Failed <Runners.SharedMemoryRunner.SharedMemoryRunner object at 0x000001EDDD191548> internal returnCode -1
( 1.14 sec) STEP MULTIRUN : DEBUG -> the job "1" has failed.
( 1.14 sec) STEP MULTIRUN : DEBUG -> Testing if the sampler is ready to generate a new input
( 1.14 sec) MonteCarlo : DEBUG -> Sampling limit reached!
( 1.14 sec) MonteCarlo : DEBUG -> ... Sample point 2: {'1100101:2': 7.8378668467586745e-05}
( 1.14 sec) Code : Message -> job "2" submitted!
( 1.15 sec) Code : Message -> Execution command submitted: C:\Users\lhj\Desktop\Case1\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r
( 1.15 sec) Code : Message -> modified command to 'C:\\Users\\lhj\\Desktop\\Case1\\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r '
( 1.17 sec) Code : Message -> Process Failed C:\Users\lhj\Desktop\Case1\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r returnCode 3221225781
( 1.17 sec) Code : Message -> ''
( 1.17 sec) Job Handler : Message -> Process Failed <Runners.SharedMemoryRunner.SharedMemoryRunner object at 0x000001EDDD191C08> internal returnCode -1
( 1.17 sec) STEP MULTIRUN : DEBUG -> the job "2" has failed.
( 1.17 sec) STEP MULTIRUN : DEBUG -> Testing if the sampler is ready to generate a new input
( 1.17 sec) MonteCarlo : DEBUG -> Sampling limit reached! No new samples ...
( 1.17 sec) STEP MULTIRUN : DEBUG -> ... sampler has no new inputs currently.
( 1.17 sec) MonteCarlo : DEBUG -> Sampling limit reached! No new samples ...
( 1.17 sec) STEP MULTIRUN : DEBUG -> Sampling finished with 2 runs submitted, 0 jobs running, and 0 completed jobs waiting to be processed.
( 1.17 sec) MonteCarlo : DEBUG -> ===============
( 1.17 sec) MonteCarlo : DEBUG -> | RUN SUMMARY |
( 1.17 sec) MonteCarlo : DEBUG -> ===============
( 1.17 sec) MonteCarlo : Warning -> There were 2 failed runs! Run with verbosity = debug for more details.
( 1.17 sec) MonteCarlo : DEBUG -> Run number 1 FAILED:
( 1.17 sec) MonteCarlo : DEBUG -> return code : -1
( 1.17 sec) MonteCarlo : DEBUG -> Run number 2 FAILED:
( 1.17 sec) MonteCarlo : DEBUG -> return code : -1
( 1.17 sec) MonteCarlo : DEBUG -> Continuing with reduced-size Monte-Carlo sampling.
( 1.17 sec) MonteCarlo : DEBUG -> ===============
( 1.17 sec) MonteCarlo : DEBUG -> END SUMMARY
( 1.17 sec) MonteCarlo : DEBUG -> ===============
( 1.17 sec) STEP MULTIRUN : Message -> *** Run finished ***
( 1.17 sec) STEP MULTIRUN : Message -> *** Closing the step ***
( 1.17 sec) STEP MULTIRUN : Message -> *** Step closed ***
( 1.17 sec) SIMULATION : Message -> -- End step MC_Sampler2 of type: MultiRun --
--------------------------------------------------
There were 2 warnings during the simulation run:
(1 time) There were 2 failed runs! Run with verbosity = debug for more details.
(1 time) current working dir C:\Users\lhj\Desktop\Case1\MonteCarlo_Pelap5\MC_Sampler2 already exists, this might imply deletion of present files
--------------------------------------------------
( 1.17 sec) SIMULATION : Message -> Run complete!
<?xml version="1.0" ?>
<Simulation verbosity="debug">
<RunInfo>
<!-- <JobName>MonteCar_Pelap5</JobName> -->
<Sequence>MC_Sampler2</Sequence>
<WorkingDir>MonteCarlo_Pelap5</WorkingDir>
<batchSize>1</batchSize>
<!-- <expectedTime>1:00:00</expectedTime> -->
</RunInfo>
<Files>
<Input name="Case1.i" type="input">C:\Users\lhj\Desktop\Case1\Case1.i</Input>
<Input name="tpfh2o" type="">C:\Users\lhj\Desktop\Case1\tpfh2o </Input>
</Files>
<Models>
<Code name="MyRELAP" subType="Relap5">
<executable>
C:\Users\lhj\Desktop\Case1\relap5.exe
</executable>
</Code>
</Models>
<Distributions>
<Normal name="area">
<mean>7.85398e-5</mean>
<sigma>1.0e-6</sigma>
</Normal>
</Distributions>
<Samplers>
<MonteCarlo name="MC_Sampler">
<samplerInit>
<limit>2</limit>
<reseedEachIteration>True</reseedEachIteration>
<initialSeed>10</initialSeed>
</samplerInit>
<variable name="1100101:2">
<distribution>area</distribution>
</variable>
</MonteCarlo>
</Samplers>
<Steps>
<MultiRun name='MC_Sampler2' re-seeding="1" >
<Input class="Files" type="input">Case1.i</Input>
<Input class="Files" type="">tpfh2o </Input>
<Model class="Models" type="Code">MyRELAP</Model>
<Sampler class="Samplers" type="MonteCarlo">MC_Sampler</Sampler>
<Output class="Databases" type="HDF5">MC_out</Output>
<Output class="DataObjects" type="PointSet">Results</Output>
<Output class="OutStreams" type="Print">my_Results</Output>
</MultiRun>
</Steps>
<Databases>
<HDF5 name="MC_out" readMode="overwrite"/>
</Databases>
<DataObjects>
<PointSet name="Results">
<Input>1100101:2</Input>
<Output>voidg_110010000,voidg_110020000</Output>
</PointSet>
</DataObjects>
<OutStreams>
<Print name="my_Results">
<type>csv</type>
<source>Results</source>
</Print>
</OutStreams>
</Simulation>
*============================================================================*
*title card
=liquid over vapor problem
*============================================================================*
* problem type and option
100 new transnt
*============================================================================*
* unit option
102 si si
*============================================================================*
*time step control cards
*crdno end time min dt max dt control minor ed major ed restart
201 10.0 1.0-6 0.01 39 5 100 1000
*============================================================================*
*minor edit requests *voidg
301 voidg 110010000
302 voidg 110020000
303 voidg 110030000
304 voidg 110040000
305 voidg 110050000
306 voidg 110060000
307 voidg 110070000
308 voidg 110080000
309 voidg 110090000
310 tempf 110010000
311 tempg 110010000
*============================================================================*
*plot variables
20300010 voidg 110010000 1 voidg 110020000 1
20300011 voidg 110030000 1 voidg 110040000 1
20300020 voidg 110050000 1 voidg 110060000 1
20300021 voidg 110070000 1 voidg 110080000 1
20300022 voidg 110090000 1
20300030 tempf 110010000 1
20300031 tempg 110010000 1
*
*============================================================================*
* HY component 110
* (pipe: flow area=7.85398e-5m2, total length=1m,
* each volume length=1/10=0.1m)
*crdno name type
1100000 "110P" pipe
*crdno no.vols.
1100001 10
*crdno area vol.no.
1100101 7.85398e-5 10
*crdno length vol.no.
1100301 0.1 10
*crdno volume vol.no.
1100401 0.0 10
*crdno v-ang vol.no.
1100601 90.0 10
*crdno rough dhy vol.no.
1100801 1.0e-6 0.01 10
*crdno ctl vol.no.
1101001 10 10
*crdno ctl jun.no.
1101101 0 9
*crdno ctl pressure voidg vol.no.
1101201 2 0.2e+6 1.0 0.0 0.0 0.0 7
1101202 2 0.2e+6 0.0 0.0 0.0 0.0 10
*crdno i.c.
1101300 1
*crdno flowf flowg velj jun.no.
1101301 0.0 0.0 0.0 9
*============================================================================*
*end
. if you use Win, the executable should be inputted using quotes: "C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe".
We will update the manual
Defect Description
Describe the defect Execution command submitted: C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r modified command to 'C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r ' Code : Message -> Process Failed C:\Users\lhj\Desktop\RELAP\RELAP5_TMSR_v1_beta_run\relap5.exe -i Case1.i -o out~Case1.o -r out~Case1.r returnCode -1 As you can see when I run this the command has failed. And I don't know why there are " returnCode -1" .
What did you expect to see happen?
What did you see instead?
Do you have a suggested fix for the development team?
Describe how to Reproduce Steps to reproduce the behavior:
Screenshots and Input Files Please attach the input file(s) that generate this error. The simpler the input, the faster we can find the issue.
Platform (please complete the following information):
For Change Control Board: Issue Review
This review should occur before any development is performed as a response to this issue.
For Change Control Board: Issue Closure
This review should occur when the issue is imminently going to be closed.