earthly/earthly (earthly/earthly)
### [`v0.8.9`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v089---2024-04-24)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.8...v0.8.9)
##### Fixed
- `BUILD --auto-skip` was recording failed steps as complete, which would lead to them being skipped on subsequent runs. [#4054](https://togithub.com/earthly/earthly/issues/4054)
##### Additional Info
- This release has no changes to buildkit
### [`v0.8.8`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v088---2024-04-17)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.7...v0.8.8)
##### Added
- New experimental wildcard-based copy, e.g. `COPY ./services/*+artifact/* .` which would invoke `COPY` for `./services/foo+artifact`, and `./services/bar+artifact` (assuming two services foo and bar, both having a `artifact` target in their respective Earthfile). Enable with the `VERSION --wildcard-copy` feature flag. [#3966](https://togithub.com/earthly/earthly/issues/3966).
- New built-in `ARG`s - `EARTHLY_GIT_AUTHOR_EMAIL` and `EARTHLY_GIT_AUTHOR_NAME` will contain the author email and author name respectively. Enable with the `VERSION --git-author-email-name-args` feature flag.
- New `--raw-output` flag available on `RUN` that outputs line without target name. Enable with `VERSION --raw-output`. [#3713](https://togithub.com/earthly/earthly/issues/3713)
##### Changed
- `EARTHLY_GIT_AUTHOR` built-in `ARG` will now contain both name and email, when enabled with the `VERSION --git-author-email-name-args` feature flag. Previously it only contained the email. [#3822](https://togithub.com/earthly/earthly/issues/3822)
##### Fixed
- Make `LET`/`SET` commands block parallel commands such as `BUILD` until the former are processed, similar to the behavior of `ARG`. [#3997](https://togithub.com/earthly/earthly/issues/3997)
- `LET`/`SET` commands were not properly handled with the use of Auto-skip. [#3996](https://togithub.com/earthly/earthly/issues/3996)
##### Additional Info
- This release has no changes to buildkit
### [`v0.8.7`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v087---2024-04-03)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.6...v0.8.7)
##### Added
- Warning log when resolving remote references using a git image that doesn't match Buildkit's architecture.
- New experimental `--exec-stats-summary=` cli flag, which will display a summary of memory and cpu stats when earthly exits.
- A notice is now displayed when unnecessary feature flags are set (but already enabled by default by the VERSION number). Thanks to [@danqixu](https://togithub.com/danqixu) for the contribution! [#3641](https://togithub.com/earthly/earthly/issues/3641)
- A warning is displayed if the local buildkit image architecture does not match the host architecture. [#3937](https://togithub.com/earthly/earthly/issues/3937)
##### Fixed
- Warning logs during HTTP retries are only displayed in `--debug` mode.
- The HOST command will now expand variables. Thanks to [@pbecotte](https://togithub.com/pbecotte) for the contribution! [#1743](https://togithub.com/earthly/earthly/issues/1743)
- runc has been updated to 1.1.12 in the buildkit fork
##### Additional Info
- This release includes changes to buildkit
### [`v0.8.6`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v086---2024-03-18)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.5...v0.8.6)
##### Added
- Ability to set arbitrary attributes which certain registries require to support explicit remote caching (via the `earthly --remote-cache` flag). [#3714](https://togithub.com/earthly/earthly/issues/3714) and [#3868](https://togithub.com/earthly/earthly/issues/3868)
##### Fixed
- Fixed an issue in Auto-skip where a `+base` target's ARGs were not accounted for when calculating the cache. [#3895](https://togithub.com/earthly/earthly/issues/3895)
##### Additional Info
- This release has no changes to buildkit
### [`v0.8.5`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v085---2024-03-11)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.4...v0.8.5)
##### Added
- Added `--aws` flag to `RUN` command which makes AWS environment variables or ~/.aws available. Enable with the `VERSION --run-with-aws` feature flag. [#3803](https://togithub.com/earthly/earthly/issues/3803)
- Added `--allow-privileged` flag to `FROM DOCKERFILE` command. Enable with the `VERSION --allow-privileged-from-dockerfile` feature flag. Thanks to [@dustyhorizon](https://togithub.com/dustyhorizon) for the contribution! [#3706](https://togithub.com/earthly/earthly/issues/3706)
##### Fixed
- Fixes an issue where wildcard `BUILD`'s are invoked from a relative directory (e.g., an `Earthfile` containing `BUILD ./*+test` invoked with `earthly ./rel-dir+target`). [#3840](https://togithub.com/earthly/earthly/issues/3840)
- `--pass-args` will no longer pass builtin args, which would result in \`value cannot be specified for built-in build arge errors. [#3775](https://togithub.com/earthly/earthly/issues/3775)
- Fixes a parsing issue with `BUILD` flag arguments and wildcard targets [#3862](https://togithub.com/earthly/earthly/issues/3862)
- `BUILD --auto-skip` was silently ignored when the feature flag (`VERSION --build-auto-skip`) was missing [#3870](https://togithub.com/earthly/earthly/issues/3870)
- Fix an issue where `COPY --if-exists` would fail if the non-existing directory includes a wildcard. [#3875](https://togithub.com/earthly/earthly/issues/3875)
- Fixes an issue with passing the correct org value to Logstream which resulted in missing logs in the web builds view (https://cloud.earthly.dev/your-org/builds).
- Rename `UDC` to `FUNCTION` in hint when a secret is not found.
##### Additional Info
- This release includes changes to buildkit
### [`v0.8.4`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v084---2024-02-21)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.3...v0.8.4)
##### Added
- The internal `dockerd-wrapper.sh` script, which is used to implement `WITH DOCKER`, will execute `/usr/share/earthly/dockerd-wrapper-pre-script`, if present, prior to starting the
inner dockerd process. This can be used to configure options that depend on the host's kernel at run-time.
- Auto-skip can now be used directly on `BUILD` commands with `BUILD --auto-skip`. [#3581](https://togithub.com/earthly/earthly/issues/3581)
##### Changed
- Satellite `rm` requires a `--force` flag if it's running. This should help protect users from accidental deletes.
##### Fixed
- Fixes an issue with the registry proxy (used for faster image & artifact exporting) on Docker Desktop for Windows/WSL. [#3769](https://togithub.com/earthly/earthly/issues/3769)
- Fixes a problem with cache IDs not being expanded. For example: `CACHE --id $MY_ARG` was not using the assigned value of `$MY_ARG`.
##### Additional Info
- This release includes changes to buildkit
### [`v0.8.3`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v083---2024-01-31)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.2...v0.8.3)
##### Fixed
- `EARTHLY_GIT_REFS` was incorrectly returning all references which contained the commit rather than pointed to the current commit. This also increases performance of looking up the branches. [#3752](https://togithub.com/earthly/earthly/issues/3752)
- Fixes an issue where `earthly account login --token` was leading to partially created auth config files. [#3761](https://togithub.com/earthly/earthly/issues/3761)
##### Additional Info
- This release includes changes to buildkit
### [`v0.8.2`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v082---2024-01-25)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.1...v0.8.2)
##### Added
- Added a `--force` flag to the `satellite update` command, which forces a satellite to sleep before starting the update process. This may forcibly kill ongoing builds currently running on the satellite.
##### Changed
- Changed the default buildkit cache size to be adaptively set to 20GB, which is then clamped between the range of 10%-55% of the disk size.
This logic can expressed as `min(55%, max(10%, 20GB))`.
- Satellites are now put to sleep before updating via `earthly sat update `.
##### Fixed
- Fixed an intermittent issue with the registry proxy support container failing immediately on Mac. [#3740](https://togithub.com/earthly/earthly/issues/3740)
- Fixed a problem with parsing empty results when cleaning up old registry proxy support containers on Mac.
- Fixed a case where a suggested command would incorrectly contain both `--interative` and `--ci`. [#3746](https://togithub.com/earthly/earthly/issues/3746)
- Disabled the registry proxy server when Earthly is run from within a container. [#3736](https://togithub.com/earthly/earthly/issues/3736)
##### Additional Info
- This release has no changes to buildkit
### [`v0.8.1`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v081---2024-01-23)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.0...v0.8.1)
##### Added
- Added a new `--disable-remote-registry-proxy` cli flag, which can be used to disable the remote registry proxy, which is used by earthly when performing a `SAVE IMAGE`
command with a satellite / remote buildkit instance. This will cause earthly to use the slower tar-based loading of docker images. [#3736](https://togithub.com/earthly/earthly/issues/3736)
- A new warning if Earthly is configured with a cache size less than 10GB; running with a small cache size may lead to unexpected cache misses.
##### Additional Info
- This release has no changes to buildkit
### [`v0.8.0`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v080---2024-01-22)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.7.23...v0.8.0)
This version promotes a number of features that have been previously in Experimental and Beta status. To make use of
the features in this version you need to declare `VERSION 0.8` at the top of your Earthfile.
**Migrating from 0.7**
If you are using Earthly 0.7, follow the following steps to migrate:
1. If you are still using `VERSION 0.5`, upgrade those Earthfiles to `VERSION 0.6` or `VERSION 0.7`.
2. Upgrade your Earthly binary to 0.8 in CI and across your team. The Earthly 0.8 binary can run both `VERSION 0.6` and `VERSION 0.7` Earthfiles (but `VERSION 0.5` support has been dropped).
3. Once everyone is using the Earthly 0.8 binary, upgrade your Earthfiles one by one to `VERSION 0.8`. It is ok to have a mix of `VERSION 0.6`, `VERSION 0.7` and `VERSION 0.8` Earthfiles in the same project. Earthly handles that gracefully. See changes below for information on backwards incompatible changes when migrating from `VERSION 0.7` to `VERSION 0.8`.
This process helps manage the backward breaking changes with minimal disruption.
**Summary**
Declaring `VERSION 0.8` is equivalent to
VERSION \
--arg-scope-and-set \
--cache-persist-option \
--git-refs \
--global-cache \
--no-network \
--pass-args \
--use-docker-ignore \
--use-function-keyword \
--use-visited-upfront-hash-collection \
0.7
For more information on the individual Earthfile feature flags see the [Earthfile version-specific features page](https://docs.earthly.dev/docs/earthfile/features).
It should be noted that some of these features break backwards compatibility. See below.
##### Changed
- Redeclaring an `ARG` in the same scope as a previous declaration is now an error.
- `ARG`s inside of targets will no longer have their default value overridden by global `ARG`s.
- Declaring a `CACHE ...` in a target will no longer be copied to children targets when referenced via a `FROM +...`; to persist the contents of the cache, it is now required to use the `CACHE --persist ...` flag.
- The `COMMAND` keyword has been renamed to `FUNCTION`.
##### Added
- `LET` - Allows declaring a local variable. This command works similarly to `ARG` except that it cannot be overridden from the CLI. `LET` variables are allowed to shadow `ARG` variables, which allows you to promote an `ARG` to a local variable so that it may be used with `SET`.
- `SET` - a new command that allows changing the value of variables declared with `LET`.
- Outputting images from a remote runner has improved performance as it no longer transfers layers that are already present locally.
- [Auto-skip](https://docs.earthly.dev/v/earthly-0.8/docs/caching/caching-in-earthfiles#3.-auto-skip) has been promoted to *beta* status.
- `RUN --network=none` allows running a command without network access.
- `.dockerignore` files are now used in `FROM DOCKERFILE` targets.
- `DO --pass-args`, `BUILD --pass-args` etc allow passing all build arguments to external Earthfiles.
- `CACHE --id=...` and `RUN --mount type=cache,id=...` allows setting a custom cache mount ID, thus allowing sharing cache mounts globally across different targets.
- New satellite sizes: 2xlarge, 3xlarge, 4xlarge
- New experimental wildcard-based builds, e.g. `BUILD ./services/*+test` which would call `./services/foo+test`, and `./services/bar+test` (assuming two services foo and bar, both having a `test` target in their respective Earthfile) [#3582](https://togithub.com/earthly/earthly/issues/3582).
##### Removed
- `VERSION 0.5` is now obsolete. Declaring `VERSION 0.5` is no longer supported, and will now raise an error.
##### Fixed
- Parallelism is improved when running the same target with different arguments in certain cases (e.g. the target uses `WITH DOCKER`).
- Fixed a log sharing upload-resumption bug
- Fixed multiple issues with the lexer failing to parse certain characters in shell command substitution (`$()`) and single quoted strings.
- Some escaped characters, like `\#`, were failing to parse when used inside shell expressions. Example: `$(echo "a#b#c" | cut -f2 -d\#)` [#3475](https://togithub.com/earthly/earthly/issues/3475)
- Some characters, like `#`, were failing to parse when used inside single-quoted strings: Example: `'this is a # string'` [#1280](https://togithub.com/earthly/earthly/issues/1280)
- Fixed an issue where some escaped `ARG` shell expressions were being incorrectly preprocessed. Example: `$(echo "\"")` became `$(echo """)` [#3131](https://togithub.com/earthly/earthly/issues/3131)
- The `--pass-args` feature was not passing active arguments which were set via a default value.
- `SAVE ARTIFACT --if-exists` was not saving files based on a wildcard glob pattern. [#1679](https://togithub.com/earthly/earthly/issues/1679)
- `BUILD` was not expanding `--platform` argument values.
##### Additional Info
- This release includes changes to buildkit
### [`v0.7.23`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v0723---2023-12-18)
[Compare Source](https://togithub.com/earthly/earthly/compare/v0.7.22...v0.7.23)
##### Added
- Auto-skip (*experimental*) - a feature that allows you to skip large parts of a build in certain situations, especially suited for monorepos. For more information see [the auto-skip section from Caching in Earthfiles](https://docs.earthly.dev/docs/caching/caching-in-earthfiles#auto-skip).
- A warning when a `COPY` destination includes a tilde (~). Related to [#1789](https://togithub.com/earthly/earthly/issues/1789).
- A hint message to suggest the usage of `-i` flag to debug the build when a RUN command fails.
- `start-interval` flag to `HEALTHCHECK` command for dockerfile parity [#3409](https://togithub.com/earthly/earthly/issues/3409).
- A verbose message indicating which authentication providers are used during a build.
- `ssh_command` config option which can be used to override the ssh command that is used by `git` when connecting to an ssh-based repository. Thanks to [@weaversam8](https://togithub.com/weaversam8) for the contribution!
##### Fixed
- Limit the number of deprecation warnings when using `COMMAND` instead of `FUNCTION` keyword.
- Fixed an error which stated `VERSION 0.0` is a valid Earthfile version.
##### Changed
- Changed the color used to print metadata values (such as ARGs values) in the build log to Faint Blue.
- Updated default alpine/git image to v2.40.1.
- When creating an auth token, an existing token will no longer be overwritten by default. To overwrite, the `--overwrite` flag should be used.
##### Additional Info
- This release includes changes to buildkit
Configuration
📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).
🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.
â™» Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 Ignore: Close this PR and you won't be reminded about this update again.
[ ] If you want to rebase/retry this PR, check this box
This PR has been generated by Mend Renovate. View repository job log here.
This PR contains the following updates:
v0.7.22->v0.8.9Release Notes
earthly/earthly (earthly/earthly)
### [`v0.8.9`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v089---2024-04-24) [Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.8...v0.8.9) ##### Fixed - `BUILD --auto-skip` was recording failed steps as complete, which would lead to them being skipped on subsequent runs. [#4054](https://togithub.com/earthly/earthly/issues/4054) ##### Additional Info - This release has no changes to buildkit ### [`v0.8.8`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v088---2024-04-17) [Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.7...v0.8.8) ##### Added - New experimental wildcard-based copy, e.g. `COPY ./services/*+artifact/* .` which would invoke `COPY` for `./services/foo+artifact`, and `./services/bar+artifact` (assuming two services foo and bar, both having a `artifact` target in their respective Earthfile). Enable with the `VERSION --wildcard-copy` feature flag. [#3966](https://togithub.com/earthly/earthly/issues/3966). - New built-in `ARG`s - `EARTHLY_GIT_AUTHOR_EMAIL` and `EARTHLY_GIT_AUTHOR_NAME` will contain the author email and author name respectively. Enable with the `VERSION --git-author-email-name-args` feature flag. - New `--raw-output` flag available on `RUN` that outputs line without target name. Enable with `VERSION --raw-output`. [#3713](https://togithub.com/earthly/earthly/issues/3713) ##### Changed - `EARTHLY_GIT_AUTHOR` built-in `ARG` will now contain both name and email, when enabled with the `VERSION --git-author-email-name-args` feature flag. Previously it only contained the email. [#3822](https://togithub.com/earthly/earthly/issues/3822) ##### Fixed - Make `LET`/`SET` commands block parallel commands such as `BUILD` until the former are processed, similar to the behavior of `ARG`. [#3997](https://togithub.com/earthly/earthly/issues/3997) - `LET`/`SET` commands were not properly handled with the use of Auto-skip. [#3996](https://togithub.com/earthly/earthly/issues/3996) ##### Additional Info - This release has no changes to buildkit ### [`v0.8.7`](https://togithub.com/earthly/earthly/blob/HEAD/CHANGELOG.md#v087---2024-04-03) [Compare Source](https://togithub.com/earthly/earthly/compare/v0.8.6...v0.8.7) ##### Added - Warning log when resolving remote references using a git image that doesn't match Buildkit's architecture. - New experimental `--exec-stats-summary=Configuration
📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).
🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.
â™» Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 Ignore: Close this PR and you won't be reminded about this update again.
This PR has been generated by Mend Renovate. View repository job log here.