search

ihrapsa / KlipperWrt

A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.
180 stars 39 forks source link

Factory reset #25

Closed dudzio12 closed 3 years ago

dudzio12 commented 3 years ago

How could I factory reset the device?

I've successfully installed KlipperWrt, managed to connect to it's Wifi hotspot. I've connect the device to my local WiFi and restarted.

Now I can see it's connected, but cannot get on it over ssh and local IP with port 81 does not show configuration page.

I've tried to one more time add bz file to reinstall it, but it does not work.

How can I reset the configuration or enable the hotspot one more time or connect to it via ssh?

ihrapsa commented 3 years ago

How could I factory reset the device?

I've successfully installed KlipperWrt, managed to connect to it's Wifi hotspot. I've connect the device to my local WiFi and restarted.

Now I can see it's connected, but cannot get on it over ssh and local IP with port 81 does not show configuration page.

I've tried to one more time add bz file to reinstall it, but it does not work.

How can I reset the configuration or enable the hotspot one more time or connect to it via ssh?

Hi, Hold the reset button for ~6 seconds and it will reset to fresh OpenWrt. Make sure the static ip of the box (192.168.1.1)does not conflict with your router's subnet. If so try changing the the box subnet from 1 to something different

dudzio12 commented 3 years ago

@ihrapsa - it's working, thanks for the tip :) I've tried pushing down reset button but for more than 10s, which I think just lead it to hard reboot 👍