Closed spcasey6907 closed 1 year ago
If your display is a serial tft one (like the one from ender 3 V2) it will not work. That display has it's own mcu and can't be controlled by klipper yet. If you've got the classic display it will work with klipper.
Mine connects via ribbon cable to printer board?!? Is this what you are saying??
Get Outlook for iOShttps://aka.ms/o0ukef
From: Iona Hrapsa @.> Sent: Thursday, May 26, 2022 12:48 PM To: ihrapsa/KlipperWrt @.> Cc: spcasey6907 @.>; Author @.> Subject: Re: [ihrapsa/KlipperWrt] Ender3 Upgrade to Klipper (Issue #30)
If your display is a serial one (like thoe wone from ender 3 V2) it will not work. That display has it's own mcu and can't be controlled by klipper yet. If you've got the classic display it will work with klipper.
— Reply to this email directly, view it on GitHubhttps://github.com/ihrapsa/KlipperWrt/issues/30#issuecomment-1138775850, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOZ5UYV7ZBKUK72LQ7XZ3VLVL6TOPANCNFSM5XBXGGPA. You are receiving this because you authored the thread.Message ID: @.***>
All displays connect via ribbon cable... Do you even know what printer and mainboard you have? Send a picture if you don't know.
What he is saying is that TFT displays that have a build in mcu aren't working with klipper, what works is the reprap 12864 style displays, which a lot of creality printers have.
[Image.jpeg][Image.jpeg]
Get Outlook for iOShttps://aka.ms/o0ukef
From: XoBoR @.> Sent: Thursday, May 26, 2022 12:54:52 PM To: ihrapsa/KlipperWrt @.> Cc: spcasey6907 @.>; Author @.> Subject: Re: [ihrapsa/KlipperWrt] Ender3 Upgrade to Klipper (Issue #30)
What he is saying is that TFT displays that have a build in mcu aren't working with klipper, what works is the reprap 12864 style displays, which a lot of creality printers have.
— Reply to this email directly, view it on GitHubhttps://github.com/ihrapsa/KlipperWrt/issues/30#issuecomment-1138787467, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOZ5UYSEF5MM2SSZZSFCBULVL6UFZANCNFSM5XBXGGPA. You are receiving this because you authored the thread.Message ID: @.***>
You haven't uploaded anything
[Image.jpeg][Image.jpeg]
Get Outlook for iOShttps://aka.ms/o0ukef
From: Iona Hrapsa @.> Sent: Thursday, May 26, 2022 1:03:09 PM To: ihrapsa/KlipperWrt @.> Cc: spcasey6907 @.>; Author @.> Subject: Re: [ihrapsa/KlipperWrt] Ender3 Upgrade to Klipper (Issue #30)
You haven't uploaded anything
— Reply to this email directly, view it on GitHubhttps://github.com/ihrapsa/KlipperWrt/issues/30#issuecomment-1138804567, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOZ5UYUYQZS4BV4PIOBL7KDVL6VE3ANCNFSM5XBXGGPA. You are receiving this because you authored the thread.Message ID: @.***>
Still nothing
I have a Creality WIFi Box and have configured with Klipper/Fluidd and appears to be operational, with add digital camera which also works. Where I am a little scared is the next step creating a 'Printer.cfg' file for the upgrade of the printer's board to klipper. I have read many pages which scare me because you lose control from the attached display to the printer. Is this true?? How do you tell if my version of the Ender3 will loose control of onboard display? I am not ready nor was I aware that this was an issue until I got down the rabbit hole. As I IT Professional I have learned to listen to my instincts....