[dev] Create tar.gz file with root filesystem and everything installed

ihrapsa / KlipperWrt

A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.

180 stars 39 forks source link

[dev] Create tar.gz file with root filesystem and everything installed #9

Closed ihrapsa closed 3 years ago

ihrapsa commented 3 years ago

Doing this should reduce the installation proccess to setting extroot and wifi

Untar file on an ext4 formatted sd card
Do extroot and swap part - just SKIP the formatting line mkfs.ext4 /dev/mmcblk0p1
Setup Wi-fi/Network/Firewall
reboot