search

iizukanao / picam

Audio/video recorder for Raspberry Pi with language agnostic API
GNU Lesser General Public License v2.1
489 stars 78 forks source link

how to delete the picam v1.4.9 and install picam v2.0.9 #195

Open rajeshkrarora1 opened 1 year ago

rajeshkrarora1 commented 1 year ago

Hi iizukanao, Thankyou for such a wonderful project, Sir, my query is that I am using picam v1.4.9 along with nginx-rtmp-module to stream to youtube and vlc , but this does not work on raspberry pi 4, so i want to uninstall version 1.4.9 and install picam version 2.0.9 , please guide

Thanks Rajesh

iizukanao commented 1 year ago

Hi Rajesh, thank you for using picam! Please just replace the picam binary with the newer version and everything should work fine. Also make sure that libcamera is enabled instead of the legacy camera stack.

FYI, picam 1.4.9 works on Raspberry Pi 4 if the legacy camera stuck is enabled in raspi-config > Interface Options.

rajeshkrarora1 commented 1 year ago

Hi iizukanao, Thankyou so much for your prompt response, I am in a remote village from last two days, where my internet was not working so i could not see your answer, I will inform you to confirm after implementing your suggestions. Thankyou once again🙏🙏🙏🙏🙏 Rajesh

rajeshkrarora1 commented 1 year ago

Hi iizukanao, Your picam version 1.4.9 is based on buster and there is only legacy camera support till buster I suppose, please correct me if I am wrong🙏🙏

iizukanao commented 1 year ago

You are correct. Bullseye is required to use libcamera.

rajeshkrarora1 commented 1 year ago

Thankyou iizukanao, but does that mean that version 1.4.9 cannot be used with pi 4, as I am using the latest picam-streamer, which uses picam version 1.4.9 and does not work on raspberry pi 4 ? 🙏🙏🙏🙏

On Thu, Jan 19, 2023 at 5:32 PM Nao Iizuka @.***> wrote:

You are correct. Bullseye is required to use libcamera.

  • picam v1.4.9 is for legacy camera stack (Buster and Bullseye)
  • picam v2.0.x is for libcamera (Bullseye)

— Reply to this email directly, view it on GitHub https://github.com/iizukanao/picam/issues/195#issuecomment-1396865899, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJFDX6SJXFBFPXMCVOEJH5TWTEUMHANCNFSM6AAAAAAT4UWBD4 . You are receiving this because you authored the thread.Message ID: @.***>

iizukanao commented 1 year ago

If you manually upgrade the OS and picam to the latest version, it should work on the Raspberry Pi 4.

rajeshkrarora1 commented 1 year ago

Ok Thanks Nao Iizuka🙏🙏🙏🙏

On Thu, Jan 19, 2023 at 7:01 PM Nao Iizuka @.***> wrote:

If you manually upgrade the OS and picam to the latest version, it should work on the Raspberry Pi 4.

— Reply to this email directly, view it on GitHub https://github.com/iizukanao/picam/issues/195#issuecomment-1396979961, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJFDX6QDOWCTP56EJ42GV73WTE63JANCNFSM6AAAAAAT4UWBD4 . You are receiving this because you authored the thread.Message ID: @.***>