search

ik1xpv / ExtIO_sddc

ExtIO_sddc.dll - BreadBoard RF103 / HDSDR
Other
69 stars 26 forks source link

SDR# crash #202

Closed Boxnut closed 2 years ago

Boxnut commented 3 years ago

When I select extio_sddc in SDR#, it tries to connect and crashes. This is my preferred software. Using this with HDSDR, the output is too bad for use, especially decoders. I would just like to have this working properly on SDR#. Radio is RX888 mkII SDRsharper (v0.5K) ExtIO_sddc.dll Version "V1.2.0" date 18/3/2021 Thankyou Oscar

Boxnut commented 3 years ago

The screenshots Screenshot (447) Screenshot (448)

ik1xpv commented 3 years ago

Thanks for feedback. I developed ExtIO_sddc with HDSDR. It will take some time to look at the new environment. :-)

ik1xpv commented 3 years ago

I was not able to find that version v 0.5k and I downloaded SDRsharper v.1.1.1 that I tested with https://github.com/ik1xpv/ExtIO_sddc/releases/tag/v1.2.0: image. You need to config the ExtIO clock ( I used 64MHz) and select IF bandwidth 16MHz or lower before pressing play button. I noticed that SDRsharper is not able to run with IF bandwidth > 16MHz. HDSDR on the same pc runs 128MHz clock and 64MHz IF bandwidth.

Boxnut commented 3 years ago

Thank you Oscar, I will make these changes and test the outcome.I tried finding a newer version of SDRsharper and unable to find a download for V1,1,1I never get to the setting before crashing, so let me find the newer version and I will keep you posted.Thank you for your time.

On Monday, May 24, 2021, 2:26:35 PM MDT, Oscar Steila ***@***.***> wrote:

I was not able to find that version v 0.5k and I downloaded SDRsharper v.1.1.1 that I tested with https://github.com/ik1xpv/ExtIO_sddc/releases/tag/v1.2.0: . You need to config the ExtIO clock ( I used 64MHz) and select IF bandwidth 16MHz or lower before pressing play button. I noticed that SDRsharper is not able to run with IF bandwidth > 16MHz. HDSDR on the same pc runs 128MHz clock and 64MHz IF bandwidth.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

Boxnut commented 3 years ago

This does function with HDSDR, but on my machine the performance is useless. Never had acceptable performance with this even with other radios, why I would like to see this work with SDR sharper.Thanks for your time

On Monday, May 24, 2021, 4:05:19 AM MDT, Oscar Steila ***@***.***> wrote:

Thanks for feedback. I developed ExtIO_sddc with HDSDR. It will take some time to look at the new environment. :-)

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.