search

ik1xpv / ExtIO_sddc

ExtIO_sddc.dll - BreadBoard RF103 / HDSDR
Other
69 stars 26 forks source link

RX888 runs offline with virtual signals in demo mode ?? #211

Closed m1ctk closed 2 years ago

m1ctk commented 2 years ago

Anyone tell me why I get this error with windows 10 64bit ? correct driver is installed as is the two files needed

ik1xpv commented 2 years ago

Hi, The virtual signal mode was present in the early release of ExtIO_sddc.dll. It is no more present from version 1.x

Please use the latest release  1.20 https://github.com/ik1xpv/ExtIO_sddc/releases/latest The required files are   ExtIO_SDDC.dll    libfftw3f-3.dll They can be downloaded from the archive SDDC_EXTIO.zip at https://github.com/ik1xpv/ExtIO_sddc/releases/download/v1.2.0/SDDC_EXTIO.ZIP

Or even better the prerelease v1.3.0RC1 the archive is at https://github.com/ik1xpv/ExtIO_sddc/releases/download/v1.3.0RC1/extio-package.zip The application HDSDR.exe v 2.0 or v2.81 can be downloaded from https://www.hdsdr.de/

Connect the BBRF103 or RX888 without running HDSDR. It must be seen in the connected USB devices  as "Cypress FX3 Boot Loader Device" If not there is a problem with the Cypress driver or hardware (by the way is the port USB 3.0?)

Oscar

m1ctk commented 2 years ago

Thanks a lot now running in HDSDR but no audio ? SDR sharp 1732 works but I can't adjust the gain - it's deaf atm. SDR console 3.0.24 what to do ? Latest version works ?

m1ctk commented 2 years ago

Update : ok SDR sharp works ok but how do I adjust the IF bandwidth down from 32MB ? Also I keep having to change settings each time I close down / start up again

ik1xpv commented 2 years ago

The max IF bandwidth processed depends also by the application.

While HDSDR processes 32 MHz in real time or 64 MHz when the setting of adc clk is 128MHz, some application are able to manage only slower rate and some others can manage 32 MHz signal stream while the real time display of IF spectrogram is limited to a narrow band.

Settings are managed by host application with the EXTIO_API ExtIoGetSetting and ExtIoSetSetting If the application do not uses them the setting are not saved, See https://github.com/ik1xpv/ExtIO_sddc/blob/master/ExtIO_sddc/ExtIO_sddc.h

m1ctk commented 2 years ago

OK anyway all 3 progs working now. Most compatible is SDR console 3.1 followed by HDSDR, SDR sharp is all over the place certainly with VHF for weather sats but MW is good