ikawahyuputeri / android-wired-tether

Automatically exported from code.google.com/p/android-wired-tether
0 stars 0 forks source link

Wont work on galaxy nexus lte #58

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
What steps will reproduce the problem?
1. use it on the phone in title
2.
3.

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?

Please provide any additional information below.

Original issue reported on code.google.com by ddarv...@gmail.com on 26 Dec 2011 at 6:40

GoogleCodeExporter commented 8 years ago
I believe this issue is caused by a lack of RNDIS drivers in the stock kernel 
on verizon phones.

Don't know if this affects other carriers' phones though.

Original comment by robert.b...@gmail.com on 4 Jan 2012 at 7:09

GoogleCodeExporter commented 8 years ago
i am running a AOSP rom and Kernel 

Original comment by ddarv...@gmail.com on 4 Jan 2012 at 7:29

GoogleCodeExporter commented 8 years ago
android hd 2.2 rom, lte version, usb tether not working. Although an 
experimental wifi tether is functional.

Is the app still in active development?

Original comment by CBernste...@gmail.com on 7 Jan 2012 at 8:10

GoogleCodeExporter commented 8 years ago
I did get it working on GNEX connected to a Ubuntu 12.04 laptop, but had to 
compile my own kernel with the CDC Ethernet device instead of the RNDIS device 
(Device Drivers->USB Support->USB Gadget Support->USB Gadget Drivers->CDC 
Composite Device (Ethernet and ACM)). It complains that the Kernel is 
incompatible, but it works anyway. I compiled the 
"android-omap-tuna-3.0-ics-mr1" kernel as stock. It seems to have some minor 
performance issues, though. Tried to compile the Franco kernel with this 
setting but could not get fully through the compile process.

My compiled kernel is here: http://goo.gl/r2OVw (redirects to Google Drive), in 
case it is helpful. You will either have to use fastboot to boot it on a 
per-use basis, or burn it to your GNEX using fastboot (If I recall, I think 
fastboot is part of the Android SDK).

You can also get a serial console (at least on Ubuntu; not tried on Windows) 
using /dev/ttyACM0, but it does not have ADB support compiled in because the 
Ethernet/ACM gadget and the Android Gadget are mutually exclusive.

Here are some sparse notes on how I compiled it: 
http://www.fieldeffect.info/w/CompilingGNEXKernel

Hope it helps!

Original comment by svrus...@fieldeffect.info on 20 Aug 2012 at 3:14

GoogleCodeExporter commented 8 years ago
5a8bb93d77b5aa2570c6ce7066b82f2e68cc4ed2 - SHA1 sum for kernel file in my last 
post
759caa705d9b6c16248a97830e7ac9db - MD5 sum for kernel file in my last post

Original comment by svrus...@fieldeffect.info on 20 Aug 2012 at 3:20

GoogleCodeExporter commented 8 years ago
Was just able to get the current jellybean Franco kernel for 4.0.x 
(http://goo.gl/xPIR5) compiled with the CDC Ethernet/ACM Serial device on, and 
it does still work with android-wired-tether. Can't speak to the stability or 
performance, because I just started using it, but here it is in case someone 
wants it.

3631db46a056d42c80dbf119f23631e9f56118fc - SHA1 Sum
8d653a9dd570c8b74603f45eaf56c938 - MD5 Sum

Original comment by svrus...@fieldeffect.info on 20 Aug 2012 at 6:36

Attachments:

GoogleCodeExporter commented 8 years ago
FYI - I had to turn off android-wireless-tether and turn it back on once or 
twice with the USB cable connected to get it to connect.

Original comment by svrus...@fieldeffect.info on 20 Aug 2012 at 6:49

GoogleCodeExporter commented 8 years ago
This works with Linux host only, as far as I know. I'm not sure if there is a 
Windows CDC Ethernet driver.

Original comment by svrus...@fieldeffect.info on 20 Aug 2012 at 9:01

GoogleCodeExporter commented 8 years ago
Got RNDIS working in kernel on GNex; attaching the kernel image. This works on 
both Windows 7 and Linux hosts (tested). Again, it's the current Franco kernel 
with RNDIS configured.

c31508b6630fead4e8a051a74018fe1fbc3d5aff - sha1sum for this image
24e8dc3204aee9648b458f6f099da5d6 - md5 sum for this image

Original comment by svrus...@fieldeffect.info on 21 Aug 2012 at 4:29

Attachments:

GoogleCodeExporter commented 8 years ago
Here's an update.zip you can use to install via clockworkmod recovery.

b23f4eb4033fb05b3872e649c2d66ee021556f84 - SHA1 sum for this zip
6629b47b082d1858e2e8bb355aac4ee2 - MD5 sum for this zip

Original comment by svrus...@fieldeffect.info on 21 Aug 2012 at 4:44

Attachments: