search

ikorb / gcvideo

GameCube Digital AV converter
678 stars 85 forks source link

Analog Output is Very Washed Out #91

Closed GK6475 closed 2 years ago

GK6475 commented 2 years ago

When I attempt to use Component or SCART RGB from my GCHD, the colors are very washed out. I tried both YPbPr, RGB, and RGBs, with the same results. I tried this on both an old TV and Retrotink-5X, with the same results. I made sure that the black levels were set correctly, so that is not the issue. These issues only occur over analog, digital is fine. Also, this happened with two seperate GCHDs, and yet I cannot find any reports of this issue elsewhere. The reason why I am putting this up is because I think it may be a software problem. Here is an example, with Analog being the washed out image: 20220520_164212 20220520_164151

ikorb commented 2 years ago

Something seems to be wrong with your white level, not your black level?

If the digital output works for you, use it? The analog stuff is just a "it wasn't much work to add it" thing, but it is not the main focus and by its nature it will always be inferior.

GK6475 commented 2 years ago

Okay. That is fine. I was using an HDMI to component converter anyways, just wanted to know if this could be solved, so that my cables weren't so messy. Also, by "black levels" I meant RGB ranges (limited or full), so it affects both black and white.