Closed NiackBuster closed 8 years ago
What's the problem? Are you not able to see the devices in an Homekit app?
I can see the bridge in homeKit click on it butnothing more after 1mn i get and error "Error / Echec du réseau ou d'une communication" - EN : "Error, communication or network failed"
usally in homebrige, the 8 digits code was the last thing written in the terminal isn't it ?
It is ok to have the code in that place. It appears at the end only when you delete accessories cache. Try the following:
I get the exact same issue and screenshots
Which version of iOS do you have?
9.3 on iPhone 9.3.2 on iPad
Both same result
2016-06-29 12:12 GMT+02:00 ilcato notifications@github.com:
Which version of iOS do you have?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229315498, or mute the thread https://github.com/notifications/unsubscribe/APLDlCws9DYiLx1Lm9HdtGJZiK3wF758ks5qQkT7gaJpZM4JApqr .
What errors suggested you to reinstall homebridge?
I re installed HomeKit also on the iPad, i had sync pb so i hard-reset the ipad and re-install a clean HomeKit. Home bridge was stuck, so I uninstalled all npm modules and installed again...
2016-06-29 12:16 GMT+02:00 ilcato notifications@github.com:
What errors suggested you to reinstall homebridge?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229316391, or mute the thread https://github.com/notifications/unsubscribe/APLDlDmP8Ai6qKYbmq1KVBWEuuKhuA_pks5qQkYNgaJpZM4JApqr .
try to logout from iCloud and connect to homebridge
I did, I see the bridge click on it but nothing happen until the Error of communication and network
2016-06-29 12:21 GMT+02:00 ilcato notifications@github.com:
try to logout from iCloud and connect to homebridge
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229317306, or mute the thread https://github.com/notifications/unsubscribe/APLDlO04RjTpvnTOWkYbUT5fKtMDAC5Eks5qQkcpgaJpZM4JApqr .
I see that you are also using harmony plugin and other accessories. Keep only the fiber plugin and try again.
Hi,
I don't understand such a thing : I uninstalled harmony-hub and http, same result on iPhone and iPad (no accessory found) I re installed harmony-hub and http and UNinstalled fibaro-homecenter and exact same result...
The only thing who change with the first case only, is the terminal, ending by "homebridge runing on port..." Not in the second case, that' S why i thought the problem was from fibaro-homecenter-hc2...
Le mercredi 29 juin 2016, ilcato notifications@github.com a écrit :
I see that you are also using harmony plugin and other accessories. Keep only the fiber plugin and try again.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229330259, or mute the thread https://github.com/notifications/unsubscribe/APLDlGMEDoAzERl2-VBucKKdGhFhwRQoks5qQlemgaJpZM4JApqr .
did you modify the config.json file during the previous tests? Try with a config file with no plugin at all. Always delete persist and accessories folders and reset homier on iOs before each test.
i tryed to delete and uninstall all plugins. I still get this error from ios (with homekit reset and no access/persist) I'm wondering if there is something with windows... I have no firewall, windows activated, i am trying to re install visual studio , don't know if that will change smth...
2016-06-30 5:38 GMT+02:00 ilcato notifications@github.com:
did you modify the config.json file during the previous tests? Try with a config file with no plugin at all. Always delete persist and accessories folders and reset homier on iOs before each test.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229551728, or mute the thread https://github.com/notifications/unsubscribe/APLDlM4_Vaht2pE5AAw7mVbj0fdtU1f8ks5qQzpHgaJpZM4JApqr .
Are you able to try it on another machine? Sometimes routers are responsible for this kind of problems, normally for mDNS protocols, but if you see the bridge it should be correct.
I try tonight to install the server on a macbook and keep you posted. Thank so much you for your support !
2016-06-30 13:18 GMT+02:00 ilcato notifications@github.com:
Are you able to try it on another machine? Sometimes routers are responsible for this kind of problems, normally for mDNS protocols, but if you see the bridge it should be correct.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229630738, or mute the thread https://github.com/notifications/unsubscribe/APLDlAwsn8X6_6WYhJ9_Y7o0VLmpxZE9ks5qQ6YDgaJpZM4JApqr .
I testes on the MacBook, working well on same network. I tryed also to repair / reinstall Vistual studio, not changing ...
2016-06-30 13:26 GMT+02:00 Thibaut Oger thibaut@comeleon.fr:
I try tonight to install the server on a macbook and keep you posted. Thank so much you for your support !
2016-06-30 13:18 GMT+02:00 ilcato notifications@github.com:
Are you able to try it on another machine? Sometimes routers are responsible for this kind of problems, normally for mDNS protocols, but if you see the bridge it should be correct.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-229630738, or mute the thread https://github.com/notifications/unsubscribe/APLDlAwsn8X6_6WYhJ9_Y7o0VLmpxZE9ks5qQ6YDgaJpZM4JApqr .
@NiackBuster : any news?
I am reinstalling everything but i'm stuck on the installation on this issue : https://github.com/nfarina/homebridge/issues/690 ... 6 hours of test and changing versions and try stuff ....
It seems not a problem of the Fibaro HC 2 plugin. Closing issue.
there were but I re install everything to update all components :)
2016-07-06 19:33 GMT+02:00 ilcato notifications@github.com:
It seems not a problem of the Fibaro HC 2 plugin. Closing issue.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ilcato/homebridge-Fibaro-HC2/issues/11#issuecomment-230846463, or mute the thread https://github.com/notifications/unsubscribe/APLDlI4x-y29CjVI9Cs_BNCi42_dCikzks5qS-b3gaJpZM4JApqr .
hello Ilcato,
I have since few days ago an error when lauch homebridge. I run on windows8 + gitCmd + last node 2.14.20 + last homebridge + last homebridge-fibaro-h2 (i did a npm update already on everything), fibaro version 4.080.
I tryed to replace your file index.js https://github.com/ilcato/homebridge-Fibaro-HC2/issues/10 and reboot , i thought it was the same issue as the french guy in #10 but seems not..
I deleted both accessories and persist, tryied to relaunch many times, those files are still empty.
I tryed to uninstall homebridge-fibaro-h2 and modify .json as expected it's launching well.
I'm stuck with no more ideas...
thank you for the work and hope you will help me :)