search

ilcato / homebridge-Fibaro-HC2

Homebridge plugin for Fibaro Home Center 2 (and Home Center Lite ...)
Apache License 2.0
65 stars 27 forks source link

HC3 Support #179

Closed dondiego9999 closed 4 years ago

dondiego9999 commented 4 years ago

Is there anyway to make this plug-in working with the new Fibaro Home Control 3 Base Station?

Mx-Razvan commented 4 years ago

It works

dondiego9999 commented 4 years ago

YESSS :) Perfekt Thank you

dondiego9999 commented 4 years ago

But i always get following error when you try to change the status of a wall plug [2/19/2020, 1:38:32 PM] [FibaroHC3] Setting value to device: 29 parameter: On
[2/19/2020, 1:38:32 PM] [FibaroHC3] There was a problem sending command turnOff to 29

ilcato commented 4 years ago

Do not have an HC 3. Cannot check.

dondiego9999 commented 4 years ago

other things are working rolling shutter for example: [2/19/2020, 7:25:00 PM] [FibaroHC3] Updating value for device: 107 parameter: Current Position, value: 0
[2/19/2020, 7:25:00 PM] [FibaroHC3] Updating value for device: 107 parameter: Target Position, value: 0
[2/19/2020, 7:25:00 PM] [FibaroHC3] Updating value for device: 107 parameter: Position State, value: 0
[2/19/2020, 7:25:03 PM] [FibaroHC3] Setting value to device: 107 parameter: Target Position
[2/19/2020, 7:25:03 PM] [FibaroHC3] Command: setValue, value: 100, to: 107
[2/19/2020, 7:25:05 PM] [FibaroHC3] Updating value for device: 107 parameter: Current Position, value: 99
[2/19/2020, 7:25:05 PM] [FibaroHC3] Updating value for device: 107 parameter: Target Position, value: 99
[2/19/2020, 7:25:05 PM] [FibaroHC3] Updating value for device: 107 parameter: Position State, value: 99

dondiego9999 commented 4 years ago

Do not have an HC 3. Cannot check.

:(

suzuatama commented 4 years ago

there is no difference in API call turnOn, so it can be the 5.020.060 having Problem with your wallplug, or ifttt notification (trun it off anr try again)

dondiego9999 commented 4 years ago

mhmm i reinstalled the docker image -> and also set up a new docker image .. always the same

[2/21/2020, 10:29:15 PM] [FibaroHC2] Setting value to device: 263 parameter: On
[2/21/2020, 10:29:15 PM] [FibaroHC2] There was a problem sending command turnOff to 263
[2/21/2020, 10:29:17 PM] [FibaroHC2] Setting value to device: 263 parameter: On
[2/21/2020, 10:29:17 PM] [FibaroHC2] There was a problem sending command turnOn to 263

i am using a classic wall plug

ilcato commented 4 years ago

@dondiego9999, @Mx-Razvan, I'm writing a specific plugin for HC3. Are you able to test it?

Mx-Razvan commented 4 years ago

Of course

dondiego9999 commented 4 years ago

@dondiego9999, @Mx-Razvan, I'm writing a specific plugin for HC3. Are you able to test it?

Yes, would be great

ilcato commented 4 years ago

@dondiego9999 , @Mx-Razvan: here

Completely untested...

dondiego9999 commented 4 years ago

@dondiego9999 , @Mx-Razvan: here

Completely untested...

This looks great [2/29/2020, 1:38:44 PM] [FibaroHC3] Command: turnOn, to: 103
[2/29/2020, 1:38:45 PM] [FibaroHC3] Updating value for device: 103 parameter: On, value: true
[2/29/2020, 1:38:46 PM] [FibaroHC3] Setting value to device: 103 parameter: On

Mx-Razvan commented 4 years ago

The wall plug is working correctly. Also a POPP Flow Stop gas/water shut-off controller. In the following days will add more devices in HC3 and will provide a feedback

ilcato commented 4 years ago

Thanks.

TimE90 commented 4 years ago

WOW! Nice to hear that also the upcoming model is supported!

Good Job ilcato! Where is the donation button? :)

ilcato commented 4 years ago

Goto homebridge-fibaro-hc3