search

ilovepancakes95 / idrac_snmp-grafana

SNMP Based Dashboard to Monitor Dell Hosts via iDRAC
https://grafana.com/grafana/dashboards/12106
Other
146 stars 39 forks source link

reset alert status #10

Closed piwi3910 closed 4 years ago

piwi3910 commented 4 years ago

I had a disk failure and the status went red. Even after replacing the disk and in idrac all looks good again, the status of the disk remains red in your panel. Any idea how to reset it, and why it's not reading the new status.

ilovepancakes95 commented 4 years ago

Which status went red? Global or storage? And which iDrac version and system are you using?

piwi3910 commented 4 years ago

Dell Customer Communication - Confidential

Global and PSU and Storage

I unplugged a psu -> idrac goes in error -> Grafana goes Red Replug -> idrac back to ok -> I even reset the log -> Grafana stays red

Did the same for a disk Dell R720XD with 2.52..52.52

From: ilovepancakes95 notifications@github.com Sent: Tuesday, July 7, 2020 3:51 PM To: ilovepancakes95/idrac_snmp-grafana Cc: Watteel, Pascal; Author Subject: Re: [ilovepancakes95/idrac_snmp-grafana] reset alert status (#10)

[EXTERNAL EMAIL]

Which status went red? Global or storage? And which iDrac version and system are you using?

- You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ilovepancakes95/idrac_snmp-grafana/issues/10#issuecomment-654802264, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AC7VO3KLYJD3YW67FMRUNPDR2MD3DANCNFSM4OPCBTUQ.

ilovepancakes95 commented 4 years ago

If you run snmpget -v 1 -c public [idrac IP here] .1.3.6.1.4.1.674.10892.5.2.1.0 from the command line on the machine running telegraf what do you get as the result? Use the iDRAC IP for the unit that is supposedly reporting the wrong status. That OID number is for "Global Status" on my R720xd running same iDRAC version.