search

iltis42 / XCVario

OpenIVario Wiki:
https://github.com/iltis42/OpenIVario/wiki
GNU General Public License v2.0
57 stars 33 forks source link

Sound Problem after switching Vario or target mode #322

Closed gliderfun closed 6 months ago

gliderfun commented 6 months ago

In double-seater mode, the sound is lost, when switching between target speed and vario or when a Flarm warning appears. Afterwards only the slave can increase the tone again using the rotary wheel.

Since Relaese 24.0229 also in Release 24.410

iltis42 commented 6 months ago

Can you give some more informations about the setup, e.g. how did you connect the two devices (WiFi or CAN), and how is your sound setup, which speaker do you use (Front/Rear), and what else settings apart from default you did in the Audio menu?

iltis42 commented 6 months ago

Thanks for the info by phone call, i noted CAN bus and rear speaker in use. By courtesy of @moshe-braner a new setup menu for "Mute Audio" has been added where the front device needs to get muted instead of the prior (workaround) with Max Volume setting to '0' just set in "Mute Audio" -> Generally -> "Audio Off" and the Max Volume setting to something like 60-80% (max value where the audio system doesn't overload), and the problem should be fixed.