im-0 / hpsahba

Tool to enable/disable HBA mode on some HP Smart Array controllers
GNU General Public License v2.0
128 stars 45 forks source link

Working on HP P410 / Desktop Motherboard / D2700 Enclosure. #21

Open GreeneTechPC opened 2 years ago

GreeneTechPC commented 2 years ago

Took a bit of effort but work wonderfully now. Thank you for sharing your efforts. Motherboard: HP Angelica2 Controller: HP P410 Enclosure: HP D2700 (x2) OS: Ubuntu Server 20.04 as well as TrueNAS SCALE both working

Other Details: Smart Array P410 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PACCRCN80ZG1TQA Cache Serial Number: PBCDF0CRH0C1Y5 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: C Firmware Version: 6.64 Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: Not Configured Drive Write Cache: Disabled Total Cache Size: 1024 MB Total Cache Memory Available: 912 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Capacitors Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True

Expander 250 Device Number: 250 Firmware Version: 0144 WWID: 5001438001A68FBF Port: 2I Box: 1 Vendor ID: HP

Enclosure SEP (Vendor ID HP, Model D2700 SAS AJ840A) 248 Device Number: 248 Firmware Version: 0144 WWID: 5001438001A68FBE Port: 2I Box: 1 Vendor ID: HP
Model: D2700 SAS AJ840A

SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 249 Device Number: 249 Firmware Version: RevC WWID: 50014380092FF5AF Vendor ID: PMCSIERA Model: SRC 8x6G