search

im-pro-at / cncgcodecontroller

CNC-GCode-Controller
MIT License
145 stars 59 forks source link

Add mirror also to Z axis, please #38

Open mikulskipiotr opened 5 years ago

mikulskipiotr commented 5 years ago

Hi,

would you be so kind and add "mirror" to Z axis. I have looked to your code and it looks like max 10 lines of code to do it.

I need it, since my machine has Z:0 in home position, and then it goes on plus in material direction. So for example Z:112 is a start when a surface of my material starts.

Thanks in advance, Piotr

im-pro-at commented 5 years ago

You can fork my code on GitHub and change it yourself. I do not have the time to test the changes and so it's better you du it yourself.

The easiest way is just to change the settings of your CNC controller.

Greetings Patrick

On Thu, May 16, 2019, 11:48 mikulskipiotr notifications@github.com wrote:

Hi,

would you be so kind and add "mirror" to Z axis. I have looked to your code and it looks like max 10 lines of code to do it.

I need it, since my machine has Z:0 in home position, and then it goes on plus in material direction. So for example Z:112 is a start when a surface of my material starts.

Thanks in advance, Piotr

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/pknoe3lh/cncgcodecontroller/issues/38?email_source=notifications&email_token=ABJYETN2FFFNOY55JUE276LPVUUXPA5CNFSM4HNK2F42YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4GUEAF7A, or mute the thread https://github.com/notifications/unsubscribe-auth/ABJYETNPZTNAFKMVJYOVFBTPVUUXPANCNFSM4HNK2F4Q .