NanoPi R6S 不能启动

immortalwrt / immortalwrt

An opensource OpenWrt variant for mainland China users.

Other

6.31k stars 1.77k forks source link

U-Boot SPL 2024.04-ImmortalWrt-r30003-4f4e8820bd (Apr 23 2024 - 07:33:34 +0000) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-682-g4ca8a8422:derrick.huang, fwver: v1.45 NOTICE: BL31: Built : 10:11:21, Dec 27 2023 INFO: spec: 0x13 INFO: code: 0x88 INFO: ext 32k is not valid INFO: ddr: stride-en 4CH INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0 INFO: l3 cache partition cfg-0 INFO: system boots from cpu-hwid-0 INFO: disable memory repair INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2024.04-ImmortalWrt-r30003-4f4e8820bd (Apr 23 2024 - 07:33:34 +0000) Model: FriendlyElec NanoPi R6S DRAM: 8 GiB (effective 7.7 GiB) Core: 315 devices, 24 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0, mmc@fe2e0000: 1 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: FriendlyElec NanoPi R6S Net: eth0: ethernet@fe1c0000 Hit any key to stop autoboot: 0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': No EFI system partition No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables 0 efi_mgr ready (none) 0 <NULL> ** Booting bootflow '<NULL>' with efi_mgr Loading Boot0000 'mmc 0' failed Loading Boot0001 'mmc 1' failed EFI boot manager: Cannot load any image Boot failed (err=-14) Scanning bootdev 'mmc@fe2e0000.bootdev': Scanning bootdev 'mmc@fe2c0000.bootdev': 1 script ready mmc 1 mmc@fe2c0000.bootdev.part /boot.scr ** Booting bootflow 'mmc@fe2c0000.bootdev.part_1' with script 6210936 bytes read in 519 ms (11.4 MiB/s) ## Loading kernel from FIT Image at 02000000 ... Using 'config-1' configuration Verifying Hash Integrity ... OK Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-6.6.27 Type: Kernel Image Compression: lzma compressed Data Start: 0x020000e8 Data Size: 6132647 Bytes = 5.8 MiB Architecture: AArch64 OS: Linux Load Address: 0x03200000 Entry Point: 0x03200000 Hash algo: crc32 Hash value: 217486cd Hash algo: sha1 Hash value: b9e230bdc910b321e461b15720d25d7dff34430f Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 02000000 ... Using 'config-1' configuration Verifying Hash Integrity ... OK Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt friendlyarm_nanopi-r6s device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x025d95d8 Data Size: 76370 Bytes = 74.6 KiB Architecture: AArch64 Hash algo: crc32 Hash value: fe48bf06 Hash algo: sha1 Hash value: 78cc9fe07a589d67b5e6a68db14d951318634684 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x25d95d8 Working FDT set to 25d95d8 Uncompressing Kernel Image to 3200000 Loading Device Tree to 00000000ecea3000, end 00000000eceb8a51 ... OK Working FDT set to ecea3000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.6.27 (buildbot@buildbot.infra.immortalwrt.org) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.2.0 r30003-4f4e8820bd) 13.2.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP PREEMPT Tue Apr 23 07:33:34 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: FriendlyElec NanoPi R6S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: 0x00000003fc000000..0x00000003fc4fffff (5120 KiB) nomap non-reusable gap1@3,fc000000 [ 0.000000] OF: reserved mem: 0x00000003fff00000..0x00000003ffffffff (1024 KiB) nomap non-reusable gap2@3,fff00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 16 MiB at 0x00000000ef000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s79016 r8192 d31576 u118784 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: coherent_pool=2M console=ttyS2,1500000 earlycon=uart8250,mmio32,0xfeb50000 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1999368 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000e8ea3000-0x00000000ecea3000] (64MB) [ 0.000000] Memory: 7860228K/8124416K available (10432K kernel code, 3038K rwdata, 7432K rodata, 3008K init, 757K bss, 247804K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 480 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: MBI range [424:479] [ 0.000000] GICv3: Using MBI frame 0x00000000fe610000 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 [ 0.000000] ITS [mem 0xfe640000-0xfe65ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001 [ 0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @1000f0000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100100000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS [mem 0xfe660000-0xfe67ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001 [ 0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @100120000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100130000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000100140000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100150000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] } [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001890] Console: colour dummy device 80x25 [ 0.002393] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003352] pid_max: default: 32768 minimum: 301 [ 0.009206] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.009932] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.015485] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.016224] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.017165] rcu: Hierarchical SRCU implementation. [ 0.017614] rcu: Max phase no-delay instances is 1000. [ 0.018642] Platform MSI: msi-controller@fe640000 domain created [ 0.019261] Platform MSI: msi-controller@fe660000 domain created [ 0.020036] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created [ 0.020825] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created [ 0.022129] smp: Bringing up secondary CPUs ... [ 0.023140] Detected VIPT I-cache on CPU1 [ 0.023211] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000 [ 0.023226] GICv3: CPU1: using allocated LPI pending table @0x0000000100160000 [ 0.023271] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.023992] Detected VIPT I-cache on CPU2 [ 0.024067] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000 [ 0.024082] GICv3: CPU2: using allocated LPI pending table @0x0000000100170000 [ 0.024128] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.024848] Detected VIPT I-cache on CPU3 [ 0.024917] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000 [ 0.024931] GICv3: CPU3: using allocated LPI pending table @0x0000000100180000 [ 0.024973] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.025642] CPU features: detected: Spectre-v4 [ 0.025647] CPU features: detected: Spectre-BHB [ 0.025652] Detected PIPT I-cache on CPU4 [ 0.025694] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000 [ 0.025703] GICv3: CPU4: using allocated LPI pending table @0x0000000100190000 [ 0.025731] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0] [ 0.026373] Detected PIPT I-cache on CPU5 [ 0.026422] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000 [ 0.026431] GICv3: CPU5: using allocated LPI pending table @0x00000001001a0000 [ 0.026459] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0] [ 0.027107] Detected PIPT I-cache on CPU6 [ 0.027156] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000 [ 0.027165] GICv3: CPU6: using allocated LPI pending table @0x00000001001b0000 [ 0.027193] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0] [ 0.027826] Detected PIPT I-cache on CPU7 [ 0.027876] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000 [ 0.027885] GICv3: CPU7: using allocated LPI pending table @0x00000001001c0000 [ 0.027914] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0] [ 0.027998] smp: Brought up 1 node, 8 CPUs [ 0.045181] SMP: Total of 8 processors activated. [ 0.045618] CPU features: detected: 32-bit EL0 Support [ 0.046093] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.046892] CPU features: detected: Common not Private translations [ 0.047469] CPU features: detected: CRC32 instructions [ 0.047949] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.048479] CPU features: detected: Privileged Access Never [ 0.049006] CPU features: detected: RAS Extension Support [ 0.049508] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.050245] CPU: All CPU(s) started at EL2 [ 0.050625] alternatives: applying system-wide alternatives [ 0.063098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064015] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.065832] pinctrl core: initialized pinctrl subsystem [ 0.067529] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.068791] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.069784] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.070680] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.071829] thermal_sys: Registered thermal governor 'step_wise' [ 0.071833] thermal_sys: Registered thermal governor 'power_allocator' [ 0.072408] cpuidle: using governor menu [ 0.073428] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.074192] ASID allocator initialised with 65536 entries [ 0.075041] Serial: AMBA PL011 UART driver [ 0.103741] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.104671] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 [ 0.105496] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.106404] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 [ 0.107183] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.108078] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 [ 0.108898] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.109807] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 [ 0.110604] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.111498] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 [ 0.113988] Modules: 26560 pages in range for non-PLT usage [ 0.113992] Modules: 518080 pages in range for PLT usage [ 0.115324] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.116458] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.117046] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.117680] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.118267] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.118909] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.119495] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.120128] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.122254] cryptd: max_cpu_qlen set to 1000 [ 0.123782] iommu: Default domain type: Translated [ 0.124231] iommu: DMA domain TLB invalidation policy: strict mode [ 0.124987] SCSI subsystem initialized [ 0.125412] usbcore: registered new interface driver usbfs [ 0.125935] usbcore: registered new interface driver hub [ 0.126444] usbcore: registered new device driver usb [ 0.126972] pps_core: LinuxPPS API ver. 1 registered [ 0.127436] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.128293] PTP clock support registered [ 0.128810] scmi_core: SCMI protocol bus registered [ 0.129912] clocksource: Switched to clocksource arch_sys_counter [ 0.131835] VFS: Disk quotas dquot_6.6.0 [ 0.132349] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.135335] NET: Registered PF_INET protocol family [ 0.135977] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.141765] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.142652] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.143381] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.144612] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.147192] TCP: Hash tables configured (established 65536 bind 65536) [ 0.147855] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.148668] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.149792] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.150345] NET: Registered PF_XDP protocol family [ 0.150797] PCI: CLS 0 bytes, default 64 [ 0.154948] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.160080] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.160626] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.185397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.186177] io scheduler mq-deadline registered [ 0.191834] /phy@fed80000: Failed to get clk index: 3 ret: -517 [ 0.194667] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.195379] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.197120] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.197831] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.199582] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.200292] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.201741] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.204162] printk: console [ttyS2] disabled [ 0.204692] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 40, base_baud = 1500000) is a 16550A [ 0.205603] printk: console [ttyS2] enabled [ 0.205603] printk: console [ttyS2] enabled [ 0.206371] printk: bootconsole [uart8250] disabled [ 0.206371] printk: bootconsole [uart8250] disabled [ 0.210562] /rng@fe378000: Failed to get clk index: 0 ret: -517 [ 0.211084] rockchip-rng fe378000.rng: failed to get clks property [ 0.215189] loop: module loaded [ 0.215466] mtip32xx Version 1.3.1 [ 0.219242] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio [ 0.219844] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio [ 0.223889] vdd_2v0_pldo_s3: Bringing 1975000uV into 2000000-2000000uV [ 0.225110] vcc_3v3_s3: Bringing 3275000uV into 3300000-3300000uV [ 0.226633] vcc_1v8_s3: Bringing 1775000uV into 1800000-1800000uV [ 0.233620] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found [ 0.234258] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator [ 0.235037] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output). [ 0.235660] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x42). [ 0.236156] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay. [ 0.236777] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0x10 [ 0.237313] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no). [ 0.242867] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID [ 0.243506] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.244142] rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5 [ 0.244593] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported [ 0.245245] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported [ 0.245896] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported [ 0.246518] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported [ 0.247080] rk_gmac-dwmac fe1c0000.ethernet: TSO supported [ 0.247559] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.248256] rk_gmac-dwmac fe1c0000.ethernet: Enabled L3L4 Flow TC (entries=2) [ 0.248878] rk_gmac-dwmac fe1c0000.ethernet: Enabled RFS Flow TC (entries=10) [ 0.249501] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled [ 0.250029] rk_gmac-dwmac fe1c0000.ethernet: SPH feature enabled [ 0.250553] rk_gmac-dwmac ethernet: Using 32/32 bits DMA host/device width [ 0.391190] usbcore: registered new interface driver usb-storage [ 0.392918] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0 [ 0.394180] i2c_dev: i2c /dev entries driver [ 0.396357] fan53555-regulator 0-0042: FAN53555 Option[10] Rev[1] Detected! [ 0.397289] fan53555-regulator 0-0043: FAN53555 Option[10] Rev[1] Detected! [ 0.402282] rtc-hym8563 6-0051: no valid clock/calendar values available [ 0.403080] rtc-hym8563 6-0051: registered as rtc0 [ 0.404513] rtc-hym8563 6-0051: no valid clock/calendar values available [ 0.405105] rtc-hym8563 6-0051: hctosys: unable to read the hardware clock [ 0.407393] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property [ 0.414514] sdhci: Secure Digital Host Controller Interface driver [ 0.415060] sdhci: Copyright(c) Pierre Ossman [ 0.415445] Synopsys Designware Multimedia Card Interface Driver [ 0.416448] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.416947] dwmmc_rockchip fe2c0000.mmc: Platform data must supply bus speed [ 0.419957] ledtrig-cpu: registered to indicate activity on CPUs [ 0.421098] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 [ 0.422106] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.422728] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.445049] rockchip-dfi: probe of fe060000.dfi failed with error -22 [ 0.447249] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.448767] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available [ 0.450022] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA [ 0.477641] NET: Registered PF_INET6 protocol family [ 0.479045] Segment Routing with IPv6 [ 0.479387] In-situ OAM (IOAM) with IPv6 [ 0.479765] NET: Registered PF_PACKET protocol family [ 0.480217] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.481639] 8021q: 802.1Q VLAN Support v1.8 [ 0.518881] rockchip-dw-pcie a40c00000.pcie: host bridge /pcie@fe180000 ranges: [ 0.519536] rockchip-dw-pcie a40c00000.pcie: IO 0x00f3100000..0x00f31fffff -> 0x00f3100000 [ 0.520309] rockchip-dw-pcie a40c00000.pcie: MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000 [ 0.521076] rockchip-dw-pcie a40c00000.pcie: MEM 0x09c0000000..0x09ffffffff -> 0x0040000000 [ 0.521960] rockchip-dw-pcie a40c00000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G [ 0.556937] mmc1: new HS200 MMC card at address 0001 [ 0.558249] mmcblk1: mmc1:0001 A3A551 28.9 GiB [ 0.560840] mmcblk1boot0: mmc1:0001 A3A551 4.00 MiB [ 0.562415] mmcblk1boot1: mmc1:0001 A3A551 4.00 MiB [ 0.563673] mmcblk1rpmb: mmc1:0001 A3A551 16.0 MiB, chardev (246:0) [ 0.730076] rockchip-dw-pcie a40c00000.pcie: PCIe Gen.2 x1 link up [ 0.730815] rockchip-dw-pcie a40c00000.pcie: PCI host bridge to bus 0003:30 [ 0.731425] pci_bus 0003:30: root bus resource [bus 30-3f] [ 0.731907] pci_bus 0003:30: root bus resource [io 0x0000-0xfffff] (bus address [0xf3100000-0xf31fffff]) [ 0.732741] pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff] [ 0.733341] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff] (bus address [0x40000000-0x7fffffff]) [ 0.734274] pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400 [ 0.734811] pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.735435] pci 0003:30:00.0: supports D1 D2 [ 0.735809] pci 0003:30:00.0: PME# supported from D0 D1 D3hot [ 0.738532] pci 0003:30:00.0: Primary bus is hard wired to 0 [ 0.739027] pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 0.739847] pci 0003:31:00.0: [10ec:8125] type 00 class 0x020000 [ 0.740423] pci 0003:31:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 0.741038] pci 0003:31:00.0: reg 0x10: [io size 0x0100] [ 0.741576] pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 0.742216] pci 0003:31:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 0.743188] pci 0003:31:00.0: supports D1 D2 [ 0.743561] pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.754067] pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31 [ 0.754660] pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff] [ 0.755256] pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref] [ 0.755886] pci 0003:30:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.756422] pci 0003:31:00.0: BAR 2: assigned [mem 0xf3200000-0xf320ffff 64bit] [ 0.757091] pci 0003:31:00.0: BAR 4: assigned [mem 0xf3210000-0xf3213fff 64bit] [ 0.757761] pci 0003:31:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.758314] pci 0003:30:00.0: PCI bridge to [bus 31] [ 0.758748] pci 0003:30:00.0: bridge window [io 0x1000-0x1fff] [ 0.759280] pci 0003:30:00.0: bridge window [mem 0xf3200000-0xf32fffff] [ 0.761535] pcieport 0003:30:00.0: PME: Signaling with IRQ 82 [ 0.762558] pcieport 0003:30:00.0: AER: enabled with IRQ 83 [ 0.763728] rockchip-dw-pcie a41000000.pcie: host bridge /pcie@fe190000 ranges: [ 0.764378] rockchip-dw-pcie a41000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 0.765156] rockchip-dw-pcie a41000000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000 [ 0.765946] rockchip-dw-pcie a41000000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0040000000 [ 0.766806] rockchip-dw-pcie a41000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G [ 0.974074] rockchip-dw-pcie a41000000.pcie: PCIe Gen.2 x1 link up [ 0.974680] rockchip-dw-pcie a41000000.pcie: PCI host bridge to bus 0004:40 [ 0.975289] pci_bus 0004:40: root bus resource [bus 40-4f] [ 0.975771] pci_bus 0004:40: root bus resource [io 0x100000-0x1fffff] (bus address [0xf4100000-0xf41fffff]) [ 0.976627] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff] [ 0.977227] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff] (bus address [0x40000000-0x7fffffff]) [ 0.978163] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400 [ 0.978700] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.979322] pci 0004:40:00.0: supports D1 D2 [ 0.979695] pci 0004:40:00.0: PME# supported from D0 D1 D3hot [ 0.982407] pci 0004:40:00.0: Primary bus is hard wired to 0 [ 0.982902] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 0.983720] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000 [ 0.984297] pci 0004:41:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.984849] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 0.985483] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 0.986458] pci 0004:41:00.0: supports D1 D2 [ 0.986832] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.998068] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41 [ 0.998659] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff] [ 0.999254] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref] [ 0.999885] pci 0004:40:00.0: BAR 7: assigned [io 0x100000-0x100fff] [ 1.000450] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit] [ 1.001120] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit] [ 1.001790] pci 0004:41:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 1.002372] pci 0004:40:00.0: PCI bridge to [bus 41] [ 1.002807] pci 0004:40:00.0: bridge window [io 0x100000-0x100fff] [ 1.003370] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff] [ 1.005502] pcieport 0004:40:00.0: PME: Signaling with IRQ 94 [ 1.006521] pcieport 0004:40:00.0: AER: enabled with IRQ 95 [ 1.010674] cpu cpu0: EM: created perf domain [ 1.010895] ehci-platform fc800000.usb: EHCI Host Controller [ 1.010974] ohci-platform fc840000.usb: Generic Platform OHCI controller [ 1.011023] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 1 [ 1.011162] ohci-platform fc840000.usb: irq 62, io mem 0xfc840000 [ 1.011575] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 2 [ 1.011649] cpu cpu4: EM: created perf domain [ 1.012420] cpu cpu6: EM: created perf domain [ 1.012883] ehci-platform fc800000.usb: irq 61, io mem 0xfc800000 [ 1.015087] clk: Disabling unused clocks [ 1.016789] dw-apb-uart feb50000.serial: forbid DMA for kernel console [ 1.029997] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00 [ 1.030770] hub 2-0:1.0: USB hub found [ 1.031118] hub 2-0:1.0: 1 port detected [ 1.074305] hub 1-0:1.0: USB hub found [ 1.074646] hub 1-0:1.0: 1 port detected [ 1.075521] Waiting for root device PARTUUID=5452574f-02... [ 3.431041] rockchip-pm-domain fd8d8000.power-management:power-controller: failed to set idle on domain 'vo0', val=0 [ 11.230414] platform fc000000.usb: deferred probe pending

U-Boot 2024.04-ImmortalWrt-r30213-db65054a17 (May 06 2024 - 04:02:24 +0000)

DDR 9fffbe1e78 cym 24/02/04-10:09:20,fwver: v1.16
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x1
CH0 RX Vref:28.8%, TX Vref:18.8%,18.8%
CH1 RX Vref:25.8%, TX Vref:21.8%,21.8%
CH2 RX Vref:25.0%, TX Vref:20.8%,20.8%
CH3 RX Vref:27.1%, TX Vref:20.8%,19.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out

U-Boot SPL 2024.04-ImmortalWrt-r30213-db65054a17 (May 06 2024 - 04:02:24 +0000)
Trying to boot from MMC1
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-682-g4ca8a8422:derrick.huang, fwver: v1.45
NOTICE:  BL31: Built : 10:11:21, Dec 27 2023
INFO:    spec: 0x13
INFO:    code: 0x88
INFO:    ext 32k is valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    disable memory repair
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9

U-Boot 2024.04-ImmortalWrt-r30213-db65054a17 (May 06 2024 - 04:02:24 +0000)

Model: FriendlyElec NanoPi R6S
DRAM:  8 GiB (effective 7.7 GiB)
Core:  315 devices, 24 uclasses, devicetree: separate
MMC:   mmc@fe2c0000: 0, mmc@fe2e0000: 1
Loading Environment from nowhere... OK
In:    serial@feb50000
Out:   serial@feb50000
Err:   serial@feb50000
Model: FriendlyElec NanoPi R6S
Net:   eth0: ethernet@fe1c0000
Hit any key to stop autoboot:  0 
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning global bootmeth 'efi_mgr':
No EFI system partition
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
  0  efi_mgr      ready   (none)       0  <NULL>                    
** Booting bootflow '<NULL>' with efi_mgr
Loading Boot0000 'mmc 0' failed
Loading Boot0001 'mmc 1' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Scanning bootdev 'mmc@fe2e0000.bootdev':
Scanning bootdev 'mmc@fe2c0000.bootdev':
  1  script       ready   mmc          1  mmc@fe2c0000.bootdev.part /boot.scr
** Booting bootflow 'mmc@fe2c0000.bootdev.part_1' with script
6264544 bytes read in 524 ms (11.4 MiB/s)
## Loading kernel from FIT Image at 02000000 ...
   Using 'config-1' configuration
   Verifying Hash Integrity ... OK
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.29
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x020000e8
     Data Size:    6184432 Bytes = 5.9 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x03200000
     Entry Point:  0x03200000
     Hash algo:    crc32
     Hash value:   a194eeba
     Hash algo:    sha1
     Hash value:   6f55ead5b5ff7671d3841638be43cc97c2c40791
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 02000000 ...
   Using 'config-1' configuration
   Verifying Hash Integrity ... OK
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt friendlyarm_nanopi-r6s device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x025e6020
     Data Size:    78194 Bytes = 76.4 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   0b551ed0
     Hash algo:    sha1
     Hash value:   4214547309875bda3e23b76cf99bca720ed876cc
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x25e6020
Working FDT set to 25e6020
   Uncompressing Kernel Image to 3200000
   Loading Device Tree to 00000000ecea2000, end 00000000eceb8171 ... OK
Working FDT set to ecea2000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.6.29 (buildbot@buildbot.infra.immortalwrt.org) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.2.0 r30213-db65054a17) 13.2.0, GNU ld (GNU Binutils) 2.42) #0 SMP PREEMPT Mon May  6 04:02:24 2024
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: FriendlyElec NanoPi R6S
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] OF: reserved mem: 0x00000003fc000000..0x00000003fc4fffff (5120 KiB) nomap non-reusable gap1@3,fc000000
[    0.000000] OF: reserved mem: 0x00000003fff00000..0x00000003ffffffff (1024 KiB) nomap non-reusable gap2@3,fff00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 16 MiB at 0x00000000ef000000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 29 pages/cpu s79016 r8192 d31576 u118784
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] CPU features: kernel page table isolation forced OFF by mitigations=off
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: coherent_pool=2M console=ttyS2,1500000 earlycon=uart8250,mmio32,0xfeb50000 root=PARTUUID=5452574f-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1999368
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000e8ea2000-0x00000000ecea2000] (64MB)
[    0.000000] Memory: 7859896K/8124416K available (10560K kernel code, 3052K rwdata, 7516K rodata, 3072K init, 758K bss, 248136K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [424:479]
[    0.000000] GICv3: Using MBI frame 0x00000000fe610000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    0.000000] ITS [mem 0xfe640000-0xfe65ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @1000f0000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100100000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS [mem 0xfe660000-0xfe67ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @100120000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100130000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x0000000100140000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000100150000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001874] Console: colour dummy device 80x25
[    0.002374] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003323] pid_max: default: 32768 minimum: 301
[    0.009166] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.009890] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.013921] spectre-v4 mitigation disabled by command-line option
[    0.016022] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.016759] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.017707] rcu: Hierarchical SRCU implementation.
[    0.018154] rcu:     Max phase no-delay instances is 1000.
[    0.019203] Platform MSI: msi-controller@fe640000 domain created
[    0.019776] Platform MSI: msi-controller@fe660000 domain created
[    0.020549] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    0.021331] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    0.022641] smp: Bringing up secondary CPUs ...
[    0.023710] Detected VIPT I-cache on CPU1
[    0.023783] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    0.023798] GICv3: CPU1: using allocated LPI pending table @0x0000000100160000
[    0.023841] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.024558] Detected VIPT I-cache on CPU2
[    0.024632] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    0.024647] GICv3: CPU2: using allocated LPI pending table @0x0000000100170000
[    0.024693] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.025418] Detected VIPT I-cache on CPU3
[    0.025487] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    0.025502] GICv3: CPU3: using allocated LPI pending table @0x0000000100180000
[    0.025543] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.026201] CPU features: detected: Spectre-v4
[    0.026207] CPU features: detected: Spectre-BHB
[    0.026211] Detected PIPT I-cache on CPU4
[    0.026254] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    0.026263] GICv3: CPU4: using allocated LPI pending table @0x0000000100190000
[    0.026291] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    0.026940] Detected PIPT I-cache on CPU5
[    0.026990] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    0.026999] GICv3: CPU5: using allocated LPI pending table @0x00000001001a0000
[    0.027028] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    0.027701] Detected PIPT I-cache on CPU6
[    0.027750] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    0.027759] GICv3: CPU6: using allocated LPI pending table @0x00000001001b0000
[    0.027786] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    0.028421] Detected PIPT I-cache on CPU7
[    0.028471] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    0.028480] GICv3: CPU7: using allocated LPI pending table @0x00000001001c0000
[    0.028507] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    0.028592] smp: Brought up 1 node, 8 CPUs
[    0.045679] SMP: Total of 8 processors activated.
[    0.046116] CPU features: detected: 32-bit EL0 Support
[    0.046589] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.047380] CPU features: detected: Common not Private translations
[    0.047957] CPU features: detected: CRC32 instructions
[    0.048445] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.048976] CPU features: detected: Privileged Access Never
[    0.049488] CPU features: detected: RAS Extension Support
[    0.049986] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.050674] spectre-bhb mitigation disabled by command line option
[    0.051291] CPU: All CPU(s) started at EL2
[    0.051672] alternatives: applying system-wide alternatives
[    0.066396] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.067312] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.069120] pinctrl core: initialized pinctrl subsystem
[    0.070841] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.072138] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.073117] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.074019] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.075224] thermal_sys: Registered thermal governor 'step_wise'
[    0.075227] thermal_sys: Registered thermal governor 'power_allocator'
[    0.075805] cpuidle: using governor menu
[    0.076851] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.077608] ASID allocator initialised with 65536 entries
[    0.078452] Serial: AMBA PL011 UART driver
[    0.109691] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.110622] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    0.111448] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.112357] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    0.113146] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.114041] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    0.114855] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.115749] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    0.116549] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    0.117450] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    0.119811] Modules: 26480 pages in range for non-PLT usage
[    0.119815] Modules: 518000 pages in range for PLT usage
[    0.121162] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.122300] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.122886] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.123518] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.124105] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.124738] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.125323] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.125960] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.128144] cryptd: max_cpu_qlen set to 1000
[    0.129676] iommu: Default domain type: Translated
[    0.130126] iommu: DMA domain TLB invalidation policy: strict mode
[    0.130895] SCSI subsystem initialized
[    0.131329] usbcore: registered new interface driver usbfs
[    0.131857] usbcore: registered new interface driver hub
[    0.132368] usbcore: registered new device driver usb
[    0.132896] pps_core: LinuxPPS API ver. 1 registered
[    0.133359] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.134214] PTP clock support registered
[    0.134730] scmi_core: SCMI protocol bus registered
[    0.135828] clocksource: Switched to clocksource arch_sys_counter
[    0.137745] VFS: Disk quotas dquot_6.6.0
[    0.138255] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.141181] NET: Registered PF_INET protocol family
[    0.141821] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.147627] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.148476] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.149203] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.150122] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.151286] TCP: Hash tables configured (established 65536 bind 65536)
[    0.151948] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.152623] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.153609] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.154147] NET: Registered PF_XDP protocol family
[    0.154599] PCI: CLS 0 bytes, default 64
[    0.160790] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.165905] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.166452] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.188312] jitterentropy: Initialization failed with host not compliant with requirements: 9
[    0.189143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.189928] io scheduler mq-deadline registered
[    0.198271] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.198981] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.200849] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.201560] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.203272] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.203989] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.205419] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.207795] printk: console [ttyS2] disabled
[    0.208333] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 40, base_baud = 1500000) is a 16550A
[    0.209240] printk: console [ttyS2] enabled
[    0.209240] printk: console [ttyS2] enabled
[    0.209995] printk: bootconsole [uart8250] disabled
[    0.209995] printk: bootconsole [uart8250] disabled
[    0.212447] /rng@fe378000: Failed to get clk index: 0 ret: -517
[    0.212968] rockchip-rng fe378000.rng: failed to get clks property
[    0.217115] loop: module loaded
[    0.217394] mtip32xx Version 1.3.1
[    0.221153] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
[    0.221755] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
[    0.225857] vdd_2v0_pldo_s3: Bringing 1975000uV into 2000000-2000000uV
[    0.227065] vcc_3v3_s3: Bringing 3275000uV into 3300000-3300000uV
[    0.228510] vcc_1v8_s3: Bringing 1775000uV into 1800000-1800000uV
[    0.235531] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    0.236175] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator
[    0.236931] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[    0.237554] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x42).
[    0.238049] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[    0.238671] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0x10
[    0.239212] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    0.244769] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    0.245397] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    0.246026] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
[    0.246475] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    0.247128] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    0.247779] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    0.248401] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    0.248962] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    0.249442] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    0.250138] rk_gmac-dwmac fe1c0000.ethernet: Enabled L3L4 Flow TC (entries=2)
[    0.250761] rk_gmac-dwmac fe1c0000.ethernet: Enabled RFS Flow TC (entries=10)
[    0.251383] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    0.251910] rk_gmac-dwmac fe1c0000.ethernet: SPH feature enabled
[    0.252434] rk_gmac-dwmac fe1c0000.ethernet: Using 32/32 bits DMA host/device width
[    0.408767] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    0.409258] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[    0.410003] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002000010
[    0.410844] xhci-hcd xhci-hcd.3.auto: irq 61, io mem 0xfc000000
[    0.410905] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    0.410925] ehci-platform fc800000.usb: EHCI Host Controller
[    0.410948] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 2
[    0.411067] ehci-platform fc800000.usb: irq 62, io mem 0xfc800000
[    0.411442] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    0.411962] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    0.412500] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
[    0.413185] ohci-platform fc840000.usb: irq 63, io mem 0xfc840000
[    0.413678] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[    0.416791] hub 1-0:1.0: USB hub found
[    0.417129] hub 1-0:1.0: 1 port detected
[    0.417610] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.418472] hub 4-0:1.0: USB hub found
[    0.418819] hub 4-0:1.0: 1 port detected
[    0.419300] usbcore: registered new interface driver usb-storage
[    0.420665] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
[    0.421704] i2c_dev: i2c /dev entries driver
[    0.423841] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    0.424063] fan53555-regulator 0-0042: FAN53555 Option[10] Rev[1] Detected!
[    0.424514] fan53555-regulator 0-0043: FAN53555 Option[10] Rev[1] Detected!
[    0.425062] hub 2-0:1.0: USB hub found
[    0.425982] hub 2-0:1.0: 1 port detected
[    0.427179] rtc-hym8563 6-0051: no valid clock/calendar values available
[    0.427865] rtc-hym8563 6-0051: registered as rtc0
[    0.429272] rtc-hym8563 6-0051: no valid clock/calendar values available
[    0.429855] rtc-hym8563 6-0051: hctosys: unable to read the hardware clock
[    0.431254] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    0.436086] sdhci: Secure Digital Host Controller Interface driver
[    0.436626] sdhci: Copyright(c) Pierre Ossman
[    0.437006] Synopsys Designware Multimedia Card Interface Driver
[    0.437731] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.437942] dwmmc_rockchip fe2c0000.mmc: Platform data must supply bus speed
[    0.439701] ledtrig-cpu: registered to indicate activity on CPUs
[    0.440463] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
[    0.441242] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    0.441842] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    0.449552] rockchip-dfi: probe of fe060000.dfi failed with error -22
[    0.451178] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[    0.452823] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[    0.471044] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    0.476229] hub 3-0:1.0: USB hub found
[    0.476570] hub 3-0:1.0: 1 port detected
[    0.480197] NET: Registered PF_INET6 protocol family
[    0.481487] Segment Routing with IPv6
[    0.481826] In-situ OAM (IOAM) with IPv6
[    0.482201] NET: Registered PF_PACKET protocol family
[    0.482652] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.484351] 8021q: 802.1Q VLAN Support v1.8
[    0.517826] cpu cpu0: EM: created perf domain
[    0.518789] cpu cpu4: EM: created perf domain
[    0.519476] cpu cpu6: EM: created perf domain
[    0.523179] rockchip-dw-pcie a40c00000.pcie: host bridge /pcie@fe180000 ranges:
[    0.523849] rockchip-dw-pcie a40c00000.pcie:       IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[    0.524622] rockchip-dw-pcie a40c00000.pcie:      MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[    0.525387] rockchip-dw-pcie a40c00000.pcie:      MEM 0x09c0000000..0x09ffffffff -> 0x0040000000
[    0.526202] rockchip-dw-pcie a40c00000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
[    0.570634] mmc1: new HS200 MMC card at address 0001
[    0.571498] mmcblk1: mmc1:0001 A3A551 28.9 GiB
[    0.573036] mmcblk1boot0: mmc1:0001 A3A551 4.00 MiB
[    0.573986] mmcblk1boot1: mmc1:0001 A3A551 4.00 MiB
[    0.574805] mmcblk1rpmb: mmc1:0001 A3A551 16.0 MiB, chardev (246:0)
[    0.732034] rockchip-dw-pcie a40c00000.pcie: PCIe Gen.2 x1 link up
[    0.732754] rockchip-dw-pcie a40c00000.pcie: PCI host bridge to bus 0003:30
[    0.733364] pci_bus 0003:30: root bus resource [bus 30-3f]
[    0.733846] pci_bus 0003:30: root bus resource [io  0x0000-0xfffff] (bus address [0xf3100000-0xf31fffff])
[    0.734680] pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff]
[    0.735280] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff] (bus address [0x40000000-0x7fffffff])
[    0.736212] pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400
[    0.736749] pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    0.737369] pci 0003:30:00.0: supports D1 D2
[    0.737743] pci 0003:30:00.0: PME# supported from D0 D1 D3hot
[    0.740401] pci 0003:30:00.0: Primary bus is hard wired to 0
[    0.740896] pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    0.741722] pci 0003:31:00.0: [10ec:8125] type 00 class 0x020000
[    0.742291] pci 0003:31:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    0.742905] pci 0003:31:00.0: reg 0x10: [io  size 0x0100]
[    0.743434] pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[    0.744068] pci 0003:31:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[    0.744985] pci 0003:31:00.0: supports D1 D2
[    0.745359] pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.756016] pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31
[    0.756607] pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
[    0.757202] pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref]
[    0.757834] pci 0003:30:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.758369] pci 0003:31:00.0: BAR 2: assigned [mem 0xf3200000-0xf320ffff 64bit]
[    0.759034] pci 0003:31:00.0: BAR 4: assigned [mem 0xf3210000-0xf3213fff 64bit]
[    0.759700] pci 0003:31:00.0: BAR 0: assigned [io  0x1000-0x10ff]
[    0.760250] pci 0003:30:00.0: PCI bridge to [bus 31]
[    0.760685] pci 0003:30:00.0:   bridge window [io  0x1000-0x1fff]
[    0.761218] pci 0003:30:00.0:   bridge window [mem 0xf3200000-0xf32fffff]
[    0.763403] pcieport 0003:30:00.0: PME: Signaling with IRQ 83
[    0.764401] pcieport 0003:30:00.0: AER: enabled with IRQ 84
[    0.768662] rockchip-dw-pcie a41000000.pcie: host bridge /pcie@fe190000 ranges:
[    0.769314] rockchip-dw-pcie a41000000.pcie:       IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[    0.770086] rockchip-dw-pcie a41000000.pcie:      MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[    0.770854] rockchip-dw-pcie a41000000.pcie:      MEM 0x0a00000000..0x0a3fffffff -> 0x0040000000
[    0.771703] rockchip-dw-pcie a41000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
[    0.979987] rockchip-dw-pcie a41000000.pcie: PCIe Gen.2 x1 link up
[    0.980593] rockchip-dw-pcie a41000000.pcie: PCI host bridge to bus 0004:40
[    0.981202] pci_bus 0004:40: root bus resource [bus 40-4f]
[    0.981684] pci_bus 0004:40: root bus resource [io  0x100000-0x1fffff] (bus address [0xf4100000-0xf41fffff])
[    0.982539] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
[    0.983139] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff] (bus address [0x40000000-0x7fffffff])
[    0.984067] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
[    0.984603] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    0.985221] pci 0004:40:00.0: supports D1 D2
[    0.985594] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
[    0.988242] pci 0004:40:00.0: Primary bus is hard wired to 0
[    0.988736] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    0.989542] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000
[    0.990111] pci 0004:41:00.0: reg 0x10: [io  0x0000-0x00ff]
[    0.990655] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[    0.991282] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[    0.992205] pci 0004:41:00.0: supports D1 D2
[    0.992579] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.003971] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
[    1.004563] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
[    1.005159] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
[    1.005789] pci 0004:40:00.0: BAR 7: assigned [io  0x100000-0x100fff]
[    1.006353] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
[    1.007018] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
[    1.007684] pci 0004:41:00.0: BAR 0: assigned [io  0x100000-0x1000ff]
[    1.008266] pci 0004:40:00.0: PCI bridge to [bus 41]
[    1.008700] pci 0004:40:00.0:   bridge window [io  0x100000-0x100fff]
[    1.009264] pci 0004:40:00.0:   bridge window [mem 0xf4200000-0xf42fffff]
[    1.011431] pcieport 0004:40:00.0: PME: Signaling with IRQ 95
[    1.012410] pcieport 0004:40:00.0: AER: enabled with IRQ 96
[    1.013952] clk: Disabling unused clocks
[    1.015483] dw-apb-uart feb50000.serial: forbid DMA for kernel console
[    1.016104] Waiting for root device PARTUUID=5452574f-02...

immortalwrt / immortalwrt

NanoPi R6S 不能启动 #1285

Describe the bug

ImmortalWrt version

ImmortalWrt release

ImmortalWrt target/subtarget

Device

Image kind

Steps to reproduce

Actual behaviour

Expected behaviour

Additional info

Diffconfig

Terms