Orangepi One Plus coremark跑分

[Matrix-CN]

前段时间捡了个Orangepi one plus的板子，H6芯片。用K5.4编译后跑了一下分，1.2W。这和H5的跑分差不多呀。应该不至于那么低，应该比RK3328高才对，求大佬看看哪里出了问题。

[Matrix-CN]

随便搜索看到这个，佬，要不要加？https://github.com/armbian/build/blob/735a3679e2de12db555e17b0485f99f86a1d106a/patch/kernel/sunxi-dev-h6/add-1.8ghz.patch https://github.com/armbian/build/blob/735a3679e2de12db555e17b0485f99f86a1d106a/patch/kernel/sunxi-dev-h6/board-0001-orangepi-one-plus-add-device.patch 曾经试过openwrt代码，也是1.2GHz

[Matrix-CN]

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.4.162 (runner@fv-az132-586) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r11797-d16776bc33)) #0 SMP Fri Mar 25 02:39:55 2022 [ 0.000000] Machine model: OrangePi One Plus [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA32 zone: 4096 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 21 pages/cpu s45784 r8192 d32040 u86016 [ 0.000000] pcpu-alloc: s45784 r8192 d32040 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=PARTUUID=5452574f-02 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1016188K/1048576K available (7678K kernel code, 698K rwdata, 2196K rodata, 576K init, 287K bss, 32388K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x2dc/0x42c with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000185] Console: colour dummy device 80x25 [ 0.000213] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000222] pid_max: default: 32768 minimum: 301 [ 0.000343] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.000355] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001521] ASID allocator initialised with 32768 entries [ 0.001587] rcu: Hierarchical SRCU implementation. [ 0.001995] smp: Bringing up secondary CPUs ... [ 0.002491] Detected VIPT I-cache on CPU1 [ 0.002539] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.002975] Detected VIPT I-cache on CPU2 [ 0.003002] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.003402] Detected VIPT I-cache on CPU3 [ 0.003427] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.003482] smp: Brought up 1 node, 4 CPUs [ 0.003498] SMP: Total of 4 processors activated. [ 0.003503] CPU features: detected: 32-bit EL0 Support [ 0.003508] CPU features: detected: CRC32 instructions [ 0.003540] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.003547] CPU: All CPU(s) started at EL2 [ 0.003563] alternatives: patching kernel code [ 0.008071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.008091] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.008249] pinctrl core: initialized pinctrl subsystem [ 0.008921] NET: Registered protocol family 16 [ 0.009819] DMA: preallocated 2048 KiB pool for atomic allocations [ 0.022300] iommu: Default domain type: Translated [ 0.022562] SCSI subsystem initialized [ 0.022691] libata version 3.00 loaded. [ 0.022886] usbcore: registered new interface driver usbfs [ 0.022922] usbcore: registered new interface driver hub [ 0.022956] usbcore: registered new device driver usb [ 0.023140] pps_core: LinuxPPS API ver. 1 registered [ 0.023145] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.023162] PTP clock support registered [ 0.023630] Advanced Linux Sound Architecture Driver Initialized. [ 0.023678] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.024380] clocksource: Switched to clocksource arch_sys_counter [ 0.028059] thermal_sys: Registered thermal governor 'step_wise' [ 0.028543] NET: Registered protocol family 2 [ 0.028666] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.029237] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.029262] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.029336] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.029483] TCP: Hash tables configured (established 8192 bind 8192) [ 0.029570] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.029603] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.029750] NET: Registered protocol family 1 [ 0.029775] PCI: CLS 0 bytes, default 64 [ 0.030307] kvm [1]: IPA Size Limit: 40 bits [ 0.030660] kvm [1]: vgic interrupt IRQ1 [ 0.030768] kvm [1]: Hyp mode initialized successfully [ 0.031508] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.035839] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.035951] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.037180] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device [ 0.037608] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO [ 0.041780] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 0.042097] sun4i-pwm 300a000.pwm: get bus clock failed fffffffffffffdfb [ 0.050639] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.052427] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.055389] loop: module loaded [ 0.056370] libphy: Fixed MDIO Bus: probed [ 0.057695] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.057708] ehci-platform: EHCI generic platform driver [ 0.058215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.058240] ohci-platform: OHCI generic platform driver [ 0.058541] usbcore: registered new interface driver usb-storage [ 0.058910] mousedev: PS/2 mouse device common for all mice [ 0.059637] sun6i-rtc 7000000.rtc: registered as rtc0 [ 0.059646] sun6i-rtc 7000000.rtc: RTC enabled [ 0.059733] i2c /dev entries driver [ 0.059915] sun50i-h6-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator [ 0.060406] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 0.065599] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0 [ 0.067061] vdd-cpu: supplied by vcc-5v [ 0.068188] vdd-gpu: supplied by vcc-5v [ 0.068666] vdd-sys: supplied by vcc-5v [ 0.069231] vcc-dram: supplied by vcc-5v [ 0.069803] vcc-pl: supplied by vcc-5v [ 0.070348] vcc-ac200: Bringing 700000uV into 3300000-3300000uV [ 0.070755] vcc-ac200: supplied by vcc-5v [ 0.071224] vcc25-dram: supplied by vcc-5v [ 0.071797] vcc-bias-pll: supplied by vcc-5v [ 0.072771] vcc-efuse-pcie-hdmi-io: supplied by vcc-5v [ 0.073322] vcc-dcxoio: supplied by vcc-5v [ 0.073981] bldo4: supplied by vcc-5v [ 0.074454] vcc-3v3: supplied by vcc-5v [ 0.075009] vcc-wifi-1: Bringing 700000uV into 3300000-3300000uV [ 0.075420] vcc-wifi-1: supplied by vcc-5v [ 0.075907] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV [ 0.076304] vcc-wifi-2: supplied by vcc-5v [ 0.076463] sw: supplied by regulator-dummy [ 0.076533] axp20x-i2c 0-0036: AXP20X driver loaded [ 0.077399] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.077736] sun50i-cpufreq-nvmem: probe of sun50i-cpufreq-nvmem failed with error -2 [ 0.079907] NET: Registered protocol family 10 [ 0.080559] Segment Routing with IPv6 [ 0.080616] NET: Registered protocol family 17 [ 0.080649] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.080655] can: controller area network core (rev 20170425 abi 9) [ 0.080696] NET: Registered protocol family 29 [ 0.080703] 8021q: 802.1Q VLAN Support v1.8 [ 0.090774] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO [ 0.094442] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 0.094967] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator [ 0.095267] printk: console [ttyS0] disabled [ 0.115670] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 21, base_baud = 1500000) is a 16550A [ 0.911803] printk: console [ttyS0] enabled [ 0.916735] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pd not found, using dummy regulator [ 0.926802] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 0.933148] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 0.939126] dwmac-sun8i 5020000.ethernet: Failed to get PHY regulator (-517) [ 0.948718] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator [ 0.959078] sunxi-mmc 4020000.mmc: Got CD GPIO [ 0.987029] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 0.996460] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pd not found, using dummy regulator [ 1.006568] vcc-gmac-3v3: supplied by vcc-ac200 [ 1.011280] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator [ 1.022216] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 1.028582] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 1.034588] dwmac-sun8i 5020000.ethernet: 5020000.ethernet supply phy-io not found, using dummy regulator [ 1.044247] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 1.050010] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 1.094212] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.104152] mmc0: new high speed SDHC card at address b368 [ 1.110185] mmcblk0: mmc0:b368 NCard 29.1 GiB [ 1.115737] mmcblk0: p1 p2 [ 1.174520] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 1.181736] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 1.188963] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 1.193921] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 1.200706] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 1.206365] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 1.212022] dwmac-sun8i 5020000.ethernet: device MAC address ea:b8:85:dc:a1:56 [ 1.219370] libphy: stmmac: probed [ 1.224556] phy phy-5100400.phy.0: Changing dr_mode to 1 [ 1.229876] ehci-platform 5101000.usb: EHCI Host Controller [ 1.235464] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1 [ 1.243277] ehci-platform 5101000.usb: irq 25, io mem 0x05101000 [ 1.274389] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 1.280612] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.288879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.296100] usb usb1: Product: EHCI Host Controller [ 1.300970] usb usb1: Manufacturer: Linux 5.4.162 ehci_hcd [ 1.306448] usb usb1: SerialNumber: 5101000.usb [ 1.311281] hub 1-0:1.0: USB hub found [ 1.315070] hub 1-0:1.0: 1 port detected [ 1.319587] ehci-platform 5311000.usb: EHCI Host Controller [ 1.325176] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 2 [ 1.332982] ehci-platform 5311000.usb: irq 27, io mem 0x05311000 [ 1.364384] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 1.370587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.378851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.386087] usb usb2: Product: EHCI Host Controller [ 1.390958] usb usb2: Manufacturer: Linux 5.4.162 ehci_hcd [ 1.396442] usb usb2: SerialNumber: 5311000.usb [ 1.401263] hub 2-0:1.0: USB hub found [ 1.405040] hub 2-0:1.0: 1 port detected [ 1.524452] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 1.531071] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 3 [ 1.538910] ohci-platform 5101400.usb: irq 26, io mem 0x05101400 [ 1.618513] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.626778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.633990] usb usb3: Product: Generic Platform OHCI controller [ 1.639909] usb usb3: Manufacturer: Linux 5.4.162 ohci_hcd [ 1.645392] usb usb3: SerialNumber: 5101400.usb [ 1.650199] hub 3-0:1.0: USB hub found [ 1.653967] hub 3-0:1.0: 1 port detected [ 1.658477] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 1.665104] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 4 [ 1.672920] ohci-platform 5311400.usb: irq 28, io mem 0x05311400 [ 1.748514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.756781] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.763992] usb usb4: Product: Generic Platform OHCI controller [ 1.769911] usb usb4: Manufacturer: Linux 5.4.162 ohci_hcd [ 1.775396] usb usb4: SerialNumber: 5311400.usb [ 1.780187] hub 4-0:1.0: USB hub found [ 1.783952] hub 4-0:1.0: 1 port detected [ 1.788570] usb_phy_generic usb_phy_generic.1.auto: usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 2.004567] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver [ 2.010319] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 5 [ 2.018274] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.026538] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.033750] usb usb5: Product: MUSB HDRC host driver [ 2.038719] usb usb5: Manufacturer: Linux 5.4.162 musb-hcd [ 2.044197] usb usb5: SerialNumber: musb-hdrc.2.auto [ 2.049430] hub 5-0:1.0: USB hub found [ 2.053196] hub 5-0:1.0: 1 port detected [ 2.058304] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:11 UTC (11) [ 2.066762] ALSA device list: [ 2.069726] No soundcards found. [ 2.086597] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 2.094107] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.101137] Freeing unused kernel memory: 576K [ 2.154407] Run /sbin/init as init process [ 2.226033] random: fast init done [ 2.250260] init: Console is alive [ 2.253796] init: - watchdog - [ 2.641219] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 2.713135] Key type encrypted registered [ 2.727474] raid6: using algorithm neonx8 gen() 0 MB/s [ 2.732612] raid6: .... xor() 0 MB/s, rmw enabled [ 2.737337] raid6: using neon recovery algorithm [ 2.746335] xor: measuring software checksum speed [ 2.844372] 8regs : 1804.000 MB/sec [ 2.944368] 32regs : 2069.600 MB/sec [ 3.044368] arm64_neon: 1840.000 MB/sec [ 3.048544] xor: using function: 32regs (2069.600 MB/sec) [ 3.123705] Btrfs loaded, crc32c=crc32c-generic [ 3.129372] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.143499] init: - preinit - [ 3.312724] random: jshn: uninitialized urandom read (4 bytes read) [ 3.347355] random: jshn: uninitialized urandom read (4 bytes read) [ 3.363388] random: jshn: uninitialized urandom read (4 bytes read) [ 3.466381] dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] [ 3.476149] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found [ 3.483452] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available [ 3.491110] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW [ 3.497640] dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii link mode [ 6.560012] mount_root: mounting /dev/root [ 6.564880] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 6.576201] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.581745] mount_root: loading kmods from internal overlay [ 6.601766] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 6.609432] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 6.785405] block: attempting to load /etc/config/fstab [ 6.793092] block: extroot: not configured [ 6.887766] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.014587] urandom-seed: Seeding with /etc/urandom.seed [ 7.201758] procd: - early - [ 7.204747] procd: - watchdog - [ 7.454660] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.749014] procd: - watchdog - [ 7.753886] procd: - ubus (running as root!) - [ 7.767852] urandom_read: 2 callbacks suppressed [ 7.767858] random: ubusd: uninitialized urandom read (4 bytes read) [ 7.808052] random: ubusd: uninitialized urandom read (4 bytes read) [ 7.814588] random: ubusd: uninitialized urandom read (4 bytes read) [ 7.821999] procd: - init - [ 7.960332] urngd: v1.0.2 started. [ 7.996718] random: crng init done [ 8.000124] random: 2 urandom warning(s) missed due to ratelimiting [ 8.170071] kmodloader: loading kernel modules from /etc/modules.d/ [ 8.214718] NET: Registered protocol family 38 [ 8.237653] async_tx: api initialized (async) [ 8.252852] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 8.301528] cryptodev: driver 1.12 loaded. [ 8.356253] Bridge firewalling registered [ 8.378187] xt_time: kernel timezone is -0000 [ 8.408467] PPP generic driver version 2.4.2 [ 8.413565] PPP MPPE Compression module registered [ 8.419420] NET: Registered protocol family 24 [ 8.431527] kmodloader: done loading kernel modules from /etc/modules.d/ [ 10.692704] xt_FULLCONENAT: RFC3489 Full Cone NAT module [ 10.692704] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang tech@chionlab.moe [ 11.146911] dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] [ 11.156792] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found [ 11.164110] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available [ 11.171810] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW [ 11.178384] dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii link mode [ 11.187188] br-lan: port 1(eth0) entered blocking state [ 11.192415] br-lan: port 1(eth0) entered disabled state [ 11.197892] device eth0 entered promiscuous mode [ 15.365007] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 15.373413] br-lan: port 1(eth0) entered blocking state [ 15.378685] br-lan: port 1(eth0) entered forwarding state [ 15.384515] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready