Open GoogleCodeExporter opened 9 years ago
What XBMC version are you running on your Pi? I will check mine today.
Original comment by basrie...@gmail.com
on 24 Dec 2012 at 11:08
Frodo Beta 1, but since other streams work fine, I think it has something to do
with the streams themselves not working properly.
Original comment by matthijs...@gmail.com
on 24 Dec 2012 at 11:51
Can it have something to do with the fact that the Pi does not have codecs for
decoding MPEG-2 and VC-1? Just something I thought of...
Original comment by matthijs...@gmail.com
on 24 Dec 2012 at 9:45
I just purchased both codecs and will test later.
Original comment by basrie...@gmail.com
on 25 Dec 2012 at 2:35
Do you have any examples of episodes that play audio only?
Original comment by basrie...@gmail.com
on 29 Jan 2013 at 3:22
There are no specific episodes that don't display video, Uitzendinggemist works
a treat (thank you for that!), so do the RTL XL episodes. I have only stumbled
upon this issue when trying to play live streams, such as the channels from
Nederland24. It has something to do with them being live streams instead of
"missed" episodes that are streamed differently.
Original comment by matthijs...@gmail.com
on 29 Jan 2013 at 8:07
me having the same problem, think it's has nothing todo with the mpeg/vc codecs.
the codecs used are:
- nederland24: wmav2 and wmv3
- missed episodes: aac and h264
Original comment by mkn...@gmail.com
on 31 Jan 2013 at 12:41
Is there anybody that has the bought the codecs for the Pi and has time to
double check? My rPi is in the bedroom, which is occupied by my 6 week old
daughter and wife most of the time. So it's a bit difficult to test.
Original comment by basrie...@gmail.com
on 31 Jan 2013 at 8:10
I have the same problem, Sveriges Television (SVT.se) works just fine but
episodes from TV6.se or TV3.se play with audio only.
Original comment by y4m...@gmail.com
on 2 Feb 2013 at 9:27
it is a codec problem. If somebody spends 2 EUR on the license, we will know if
it works.
Original comment by basrie...@gmail.com
on 2 Feb 2013 at 1:50
I just checked here on my Pi (it was abandoned for a moment) and I have audio
and video on the Journaal 24 and Politiek 24 channels.....It just crashes
Raspbmc if you stop the streams (again, not an XOT-Uzg.v3 issue).
I have bought both codec licenses available for the the Pi. So if somebody that
has video of the channels be willing to buy the licenses so we can double
check?
Original comment by basrie...@gmail.com
on 2 Feb 2013 at 7:57
I have a similar issue when using the Dumpert channel (dutch) on the Raspberry
Pi.
Audio will play but no video. I see that it is likely a codec issue and I am
willing to spend 2 euro to see if that does the trick but I have no idea how :)
Original comment by sjoe...@gmail.com
on 13 Feb 2013 at 8:27
Found it, will update later
http://www.raspberrypi.com/mpeg-2-license-key/
Original comment by sjoe...@gmail.com
on 13 Feb 2013 at 8:35
I have now tried tv6play with the codecs and its still only audio no video.
Original comment by wmad...@gmail.com
on 15 Apr 2013 at 8:52
Really strange. What version of XBMC are you using on rPi? OpenElec/Raspbmc?
and what versions of these two?
Original comment by basrie...@gmail.com
on 15 Apr 2013 at 8:14
If you are asking me I am using the latest raspbmc (auto update).
When I start for tv6play (svtplay works fine though) I see a static picture
and can hear only audio, if I maximize the screen i get a black screen only.
Original comment by wmad...@gmail.com
on 16 Apr 2013 at 7:57
please tell me what streams you are trying to use?
Original comment by basrie...@gmail.com
on 17 Apr 2013 at 5:33
Is this still an issue?
Original comment by basrie...@gmail.com
on 29 Jun 2013 at 7:57
yes, this is still happening. the add-on dumpert still gifs only audio (i have
de codecs and can watch the dutch channels, but not alle videos).
Original comment by Opvol...@gmail.com
on 3 Jul 2013 at 6:24
I already asked for examples. Without them, I cannot try to fix it.
Original comment by basrie...@gmail.com
on 3 Jul 2013 at 6:46
Trying to view a Dumpert stream
(http://wiki.xbmc.org/index.php?title=Add-on:Dumpert
https://code.google.com/p/dumpertxbmc/) on my raspberry pi (XBian 1.0 Beta 1.1)
I also get NO video, only audio.
Stream seems to be Flash Video (FLV1)
XMBC Log:
06:20:35 T:3042619392 NOTICE: COMXPlayer: Opening:
http://media.dumpert.nl/flv/e9b3ef98_trollende_bok.mp4.flv
06:20:35 T:3042619392 WARNING: CDVDMessageQueue(player)::Put
MSGQ_NOT_INITIALIZED
06:20:36 T:2834297920 NOTICE: Thread COMXPlayer start, auto delete: false
06:20:36 T:2834297920 NOTICE: Creating InputStream
06:20:37 T:2834297920 NOTICE: Creating Demuxer
06:20:37 T:2815419456 NOTICE: Thread CFileCache start, auto delete: false
06:20:39 T:2834297920 NOTICE: Opening video stream: 0 source: 256
06:20:39 T:2834297920 ERROR: OMXPlayerVideo : Error open video output
06:20:39 T:2834297920 NOTICE: OMXClock using video as reference
06:20:39 T:2834297920 WARNING: OpenVideoStream - Unsupported stream 0. Stream
disabled.
06:20:39 T:2834297920 NOTICE: Opening audio stream: 1 source: 256
06:20:39 T:2834297920 NOTICE: Creating audio thread
06:20:39 T:2795500608 NOTICE: Thread COMXPlayerAudio start, auto delete: false
06:20:39 T:2834297920 WARNING: CDVDMessageQueue(video)::Put MSGQ_NOT_INITIALIZED
06:20:39 T:2795500608 WARNING: Previous line repeats 1 times.
06:20:39 T:2795500608 NOTICE: OMXClock using audio as reference
Original comment by ralph...@gmail.com
on 19 Aug 2013 at 11:34
I need a full debug uzg(plugin).log. You can set the level from the XOT-Uzg.v3
Addon settings.
Original comment by basrie...@gmail.com
on 20 Aug 2013 at 5:45
getting my raspi in a couple of days and was looking into what to expect. I
guess it has something to do with codecs, but i also ran into this similar
problem:
http://www.erikdevries.com/hardware/de-installatie-van-xbmc-op-een-raspberry-pi/
Its in dutch ;)
solution for black screen, no audio might be editting /boot/config.txt. Change
the value “gpu_mem=100″ to something higher, probably “gpu_mem=128″.
================================================================================
==
"Hoewel 99% van alle films die ik afspeel zonder problemen werken liep ik in
een aantal gevallen tegen het probleem dat enkel geluid werd afgespeeld, het
beeld blijft zwart. Nadat ik via e-mail een vraag binnen kreeg van iemand met
dit zelfde probleem ben ik hier verder ingedoken. Na het openen van de logfiles
van XBMC kwam ik al snel achter de oorzaak, de Raspberry had niet genoeg
geheugen om deze video af te spelen, de volgende regel stond in de logfile:
COMXCoreComponent::DecoderEventHandler OMX.broadcom.video_decode –
OMX_ErrorInsufficientResources, insufficient resources
Na enig speurwerk op internet kwam ik achter de mogelijke oplossing, namelijk
meer geheugen toekennen aan de GPU (de videochip). Dit bleek inderdaad te
werken, wie weet lost dit ook jouw problemen op. Je past dit als volgt aan:
Log via SSH in op de Raspberry Pi (standaard is de gebruikersnaam “pi” en het wachtwoord “raspberry”)
Open /boot/config.txt in bijvoorbeeld vi of nano: sudo nano /boot/config.txt
Pas de regel “gpu_mem=100″ aan naar “gpu_mem=128″ en sla de wijzigingen op
Reboot de Raspberry Pi en probeer of de video nu correct werkt."
================================================================================
===
Original comment by henk.buu...@gmail.com
on 4 Dec 2013 at 5:41
That sounds promising. Could somebody verify this fix? I do not have this issue
myself so I cannot verify it.
Original comment by basrie...@gmail.com
on 4 Dec 2013 at 6:54
Hi my settings are allready “gpu_mem=128″ (using openelec) and have de same
problem.
I have de codecs installed. most of the streams are working. But stil some are
falling. Like this:
20:49:24 T:2638214240 WARNING: COMXImageFile::GetCodingType progressive images
not supported by decoder
20:49:24 T:2638214240 ERROR: COMXImageFile::ReadFile
http://static.dumpert.nl/sq_thumbs/6574954_e2503766.jpg GetCodingType=0x7fffffff
20:49:24 T:2638214240 NOTICE: LoadJpeg: unable to load
http://static.dumpert.nl/sq_thumbs/6574954_e2503766.jpg
20:49:26 T:2752509024 NOTICE: Thread XBPyThread start, auto delete: false
20:49:27 T:2752509024 NOTICE: -->Python Interpreter Initialized<--
20:49:31 T:2752509024 WARNING: Attempt to use invalid handle -1
20:49:32 T:3046404624 NOTICE: COMXPlayer: Opening:
http://media.dumpert.nl/flv/e2503766_Man_bijt_hyves.mp4.flv
20:49:32 T:3046404624 WARNING: CDVDMessageQueue(player)::Put
MSGQ_NOT_INITIALIZED
20:49:32 T:3046404624 NOTICE: CXBMCRenderManager::ResetRenderBuffer - using 5
render buffers
20:49:32 T:2621437024 NOTICE: Thread COMXPlayer start, auto delete: false
20:49:32 T:2621437024 NOTICE: Creating InputStream
20:49:32 T:2621437024 NOTICE: Creating Demuxer
20:49:32 T:2586829920 NOTICE: Thread CFileCache start, auto delete: false
20:49:33 T:2621437024 NOTICE: Opening video stream: 0 source: 256
20:49:33 T:2621437024 ERROR: COMXVideo::Open : Video codec unknown: 16
20:49:33 T:2621437024 ERROR: OMXPlayerVideo : Error open video output
20:49:33 T:2621437024 WARNING: OpenVideoStream - Unsupported stream 0. Stream
disabled.
20:49:33 T:2621437024 NOTICE: Opening audio stream: 1 source: 256
20:49:33 T:2621437024 NOTICE: Creating audio thread
20:49:33 T:2561664096 NOTICE: Thread COMXPlayerAudio start, auto delete: false
20:49:33 T:2621437024 WARNING: CDVDMessageQueue(video)::Put MSGQ_NOT_INITIALIZED
20:49:34 T:2621437024 WARNING: Previous line repeats 1 times.
20:49:34 T:2621437024 NOTICE: OMXClock using audio as reference
20:49:44 T:3046404624 NOTICE: COMXPlayer::CloseFile
20:49:44 T:3046404624 NOTICE: COMXPlayer: waiting for threads to exit
20:49:44 T:2621437024 NOTICE: COMXPlayer::OnExit()
20:49:44 T:2621437024 NOTICE: OMXPlayer: closing audio stream
20:49:44 T:2621437024 NOTICE: Closing audio stream
20:49:44 T:2561664096 NOTICE: thread end: OMXPlayerAudio::OnExit()
20:49:44 T:2621437024 NOTICE: COMXPlayer::OnExit() deleting demuxer
20:49:44 T:2621437024 NOTICE: COMXPlayer::OnExit() deleting input stream
20:49:45 T:3046404624 NOTICE: DVDPlayer: finished waiting
20:49:45 T:3046404624 NOTICE: COMXPlayer::CloseFile
20:49:45 T:3046404624 WARNING: CDVDMessageQueue(player)::Put
MSGQ_NOT_INITIALIZED
20:49:45 T:3046404624 NOTICE: COMXPlayer: waiting for threads to exit
20:49:45 T:3046404624 NOTICE: DVDPlayer: finished waiting
Original comment by Opvol...@gmail.com
on 4 Dec 2013 at 8:15
OpenELEC:~/.xbmc/temp # vcgencmd codec_enabled MPG2
MPG2=enabled
OpenELEC:~/.xbmc/temp # vcgencmd codec_enabled WVC1
WVC1=enabled
Original comment by Opvol...@gmail.com
on 4 Dec 2013 at 8:24
Bitbucket Migration Message:
The XOT Google Code issue tracker is being migrated to Bitbucket. Please DO NOT
update these issues in Google Code, but rather at their new location. During
the migration the Bitbucket issue tracker will be unavailable.
More information on the migration can be found here:
http://www.rieter.net/content/2014/02/26/bitbucket-here-we-come/
The new issue tracker is located at:
https://bitbucket.org/basrieter/xbmc-online-tv/issues?status=new&status=open
Original comment by basrie...@gmail.com
on 28 Feb 2014 at 9:35
Original issue reported on code.google.com by
matthijs...@gmail.com
on 23 Dec 2012 at 8:45