[PATCH] Set wifi enable GPIO during board init

[abrasive]

EDIT: I'm a dingbat and the original patch was reversed.

--- a/arch/arm/mach-mx6/board-mx6q_hdmidongle.c
+++ b/arch/arm/mach-mx6/board-mx6q_hdmidongle.c
@@ -74,9 +74,7 @@
 #define HDMIDONGLE_HDMI_CEC_IN IMX_GPIO_NR(4, 11)

-#define HDMIDONGLE_BT_RST  IMX_GPIO_NR(3, 7)
-#define HDMIDONGLE_BT_EN   IMX_GPIO_NR(3, 9)
-#define HDMIDONGLE_WL_EN        IMX_GPIO_NR(3, 10)
+#define HDMIDONGLE_WL_EN        IMX_GPIO_NR(2, 0)

 #define HDMIDONGLE_SD2_CD      IMX_GPIO_NR(1, 4)
 #define HDMIDONGLE_REVA_POWER_KEY  IMX_GPIO_NR(6, 16)
@@ -442,12 +440,12 @@ static void __init mx6_hdmidongle_board_init(void)
    gpio_set_value(HDMIDONGLE_BT_EN, 1);
    printk(KERN_ERR "%s: bt_en\n", __func__);
    msleep(1000);
+    */

    gpio_request(HDMIDONGLE_WL_EN, "wl_en");
    gpio_direction_output(HDMIDONGLE_WL_EN, 1);
-   gpio_set_value(HDMIDONGLE_WL_EN, 1);
+   gpio_set_value(HDMIDONGLE_WL_EN, 0);
    printk(KERN_ERR "%s: wl_en\n", __func__);
-   msleep(1000);*/

    pm_power_off = mx6_snvs_poweroff;
    imx6q_add_busfreq();