search

inonoob / pirowflo

All-in-one data interface for your Waterrower S4 Monitor or Smartrow
GNU General Public License v3.0
141 stars 32 forks source link

[BUG] OLED display not working #67

Open benbamm opened 1 year ago

benbamm commented 1 year ago

I have installed pirowflo on a rapsberry, and it is working, but the OLED display does not seem to work. It lights up entirely and only blinks every few seconds. Do I have to install something else to get the display to work or did something go wrong with the installation?

jcbigears commented 1 year ago

Hey I have the same problem. Installed 1.3inch OLED HAT and installed from here https://www.waveshare.com/wiki/1.3inch_OLED_HAT Screen works with python demo program. Piroflo can be started via webserver. BUT screen OLED HAT remains blank. @inonoob @DANgerous25 any ideas?

ssfpr commented 1 year ago

Mine does not seem to even light up. Have you found a way to make the screen work?

jcbigears commented 1 year ago

I emailed the supplier of the screen and they sent me an image to run the pi. Then it worked. But I gave up in the end. John @.***

On 14 Aug 2023, at 03:14, ssfpr @.***> wrote:



Mine does not seem to even light up. Have you found a way to make the screen work?

— Reply to this email directly, view it on GitHub https://github.com/inonoob/pirowflo/issues/67#issuecomment-1676415997, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFUH66Y3ESN3FCE2LUCXUOLXVEDRHANCNFSM6AAAAAAXNRD4PI . You are receiving this because you commented.Message ID: @.***>

benbamm commented 1 year ago

Yeah, I did not look in to it further either. In spring and summer I don't row, so I did not use the waterrower anymore since. I could get it to work with the browser, but the screen did nothing. But I mainly built it to register the workout on my Garmin Edge 530 but this did not work, so money down the drain...

ssfpr commented 1 year ago

I have managed to use it via the browser but the screen shows no signs of life. Am picking up the Ant signal as a Trainer on an Epix watch and it registers all the stats from the WR unit. Will see if the supplier can help.

ssfpr commented 1 year ago

Any idea btw whether the interface used is SPI or I2C? Do I enable both or only one of them?

pc1246 commented 7 months ago

Hi guys As you have PiRowFlo up and running, I would be interested how you have managed this. I tried a lot, but I ended up as the others in an incomplete installation. Do you see a chance to describe your setup? Thanks in advance and regards Christoph

jcbigears commented 7 months ago

Hi. Unfortunately mine never completely worked. The pi worked fine in the end but I could never get it to connect to the Smartrow. JohnOn 5 Apr 2024, at 20:41, pc1246 @.***> wrote: Hi guys As you have PiRowFlo up and running, I would be interested how you have managed this. I tried a lot, but I ended up as the others in an incomplete installation. Do you see a chance to describe your setup? Thanks in advance and regards Christoph

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

ssfpr commented 7 months ago

Mine works other than the useless screen with controller which I think is a hardware problem potentially. I turn it on via mobile browser with IP address after plugging in and I only use it to feed the signal to my Garmin Epix2.

Let me know how I can help.

From: jcbigears @.> Sent: Friday, April 5, 2024 12:39 PM To: inonoob/pirowflo @.> Cc: ssfpr @.>; Comment @.> Subject: Re: [inonoob/pirowflo] [BUG] OLED display not working (Issue #67)

Hi. Unfortunately mine never completely worked. The pi worked fine in the end but I could never get it to connect to the Smartrow. JohnOn 5 Apr 2024, at 20:41, pc1246 @. <mailto:@.> > wrote: Hi guys As you have PiRowFlo up and running, I would be interested how you have managed this. I tried a lot, but I ended up as the others in an incomplete installation. Do you see a chance to describe your setup? Thanks in advance and regards Christoph

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @. <mailto:@.> >

— Reply to this email directly, view it on GitHub https://github.com/inonoob/pirowflo/issues/67#issuecomment-2039584232 , or unsubscribe https://github.com/notifications/unsubscribe-auth/BBYCBFNIV24WYOXO7Z3EO2DY32ENRAVCNFSM6AAAAAAXNRD4PKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMZZGU4DIMRTGI . You are receiving this because you commented. https://github.com/notifications/beacon/BBYCBFJVAGIUH37N6ZGFK2DY32ENRA5CNFSM6AAAAAAXNRD4PKWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTZSGK6Q.gif Message ID: @. @.> >