Repeated attempts using EDMCOverlay with EDR

inorton / EDMCOverlay

An overlay plugin for ED Market Connector

78 stars 9 forks source link

Repeated attempts using EDMCOverlay with EDR #20

Closed WarxThane closed 9 months ago

WarxThane commented 6 years ago

I've tried EDMCO with both HITS and EDR and nothing seems to get EDMCO working at all.

I've done fresh installs of EDMCO with HITS and EDR separately, and can't find any troubleshooting tips anywhere.

WarxThane commented 6 years ago

I can see EDMCO pop in and out while holding Alt+Tab but never appears over elite, and its in borderless

inorton commented 6 years ago

Hi @WarxThane can I ask what sort of graphics card and what version of windows you have?

I have an NVidia 970 GTX, Before that It worked on my 740 GTX and GT9600 quite well.

WarxThane commented 6 years ago

@inorton I have a Nvidia 1070 GTX, with Windows 10 PRO

inorton commented 6 years ago

Hi @WarxThane

What screen resolution are you running at? Do you have an edmcoverlay.log file you could send me?

sapientem commented 5 years ago

I have exactly the same problem. 1070 Ti here and latest drivers. Works for me in windowed, but not borderless or fullscreen. Resolution is 1920x1080. The owner of EDR didn't know what was wrong and directed me here. Image attached is a last bit of our conversation.

sapientem commented 5 years ago

Figured these would also be helpful. I generated them by testing various commands from EDR and jumping out and back into a system (since the tmp folder was cleared on a reboot). edmcoverlay.log EDMarketConnector.log

inorton commented 5 years ago

Hmm. Thank you all for the details.

I'm totally stumped but it seems 10xx cards is the common theme.

HavocRS commented 5 years ago

Same problem here, EDMC is not shown in the game

inorton commented 5 years ago

The directx calls I make from c# are the subject of much debate, there are things that apparently just should work fine on all cards but sometimes quirks you need to do before drawing on the screen.

Occasionally on my system it will draw nothing, or only draw in a small corner of the screen.

incryptx commented 5 years ago

I think I have the same issue, on a 1070Ti with the latest drivers. I am using borderless as well.

When starting the game, I have /edmc/overlay/ displayed when seeing the spinning ship, but nothing after this. My resolution is 3840x2160. I also use EDR and HITS, as well as ExTool.

EDMarketConnector.log EDMarketConnector-1.log edmcoverlay.log

youloveben commented 5 years ago

Just chiming in to say "me too".

One monitor, GTX1070 w/ updated drivers, borderless, 1920x1080, and the kicker for me is that it worked fine last year... any suggestions?

edmcoverlay.log

youloveben commented 5 years ago

Howto-_ED_Recon.pdf

This helped me get it to work again; Section D specifically. Props to LeKeno!

inorton commented 5 years ago

Oh I get it now! EDR doesn't render onto the overlay by default!

inorton commented 2 years ago

Possibly fixed in 1.0.6