Wheel core disconnected hexagonal shaft

[aresgit]

Release: c0.96.0

Summary: The STL and STEP files for the wheel core are missing the semi-circular transition connecting the hexagonal shaft.

Steps to Reproduce:

1. Download the stl.zip or step.zip file from the c0.96.0 release download page
2. Unzip the downloaded archive file
3. Open the secondary_007mm_wheel_core.stl or secondary_007mm_wheel_core.step file using your favorite slicer or CAD software (screenshots attached)

Notes

• STL file opening tested on the following programs:
  • PrusaSlicer 2.7.4
  • Fusion360
  • Tinkercad.com
  • onshape.com
• STEP file opening tested on the following programs:
  • Fusion360
  • onshape.com
• Performing a make release of the repo as described in the README results in valid STL and STEP files being produced and they have a different checksum than the wheel core files in the c.0.96.0 stl.zip or step.zip archives.

[marcos-diaz]

Can you please check if this is still an issue in 0.96.1 ? 🙏 (could be that the export script was doing something funny)

[aresgit]

It looks good now! 🎉 👏

The first image is from Tinkercad and the second is from Fusion360 after importing both the previous (0.96.0) and new (0.96.1) wheel core STL files.

Thank you!

[marcos-diaz]

Cool, thank you!