Closed Aurusd closed 6 years ago
should be online today or monday, thanks
On my computer board version i have plug modem without problem. But on yocto linux 1.5.1 i haven't seen any telit device (no lsusb, no lspci). What i have missed? maybe i need to build my own yocto image with ither drivers. Have anybody advices? maybe there isn't some drivers, cause this modem not also not detected
on this guide https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/aero/aero-platform-uavs-mechanical-assembly-guid… i have connect telit modem to R RESERVED for future use maybe itsn't m.2, cause on 13 M.2 Interface for PCIe SSD there is pins mismatch beetwen telit modem and computer board
maybe i need to activate R RESERVED or its not work actually?
And there is a big question second m2 socket type B marked on https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/aero/aero-platform-uavs-mechanical-assembly-guide.pdf like R Reserved and socket for sim card actually is active or empty?
Hi Ausurd, have you updated BIOS as well? v01.00.13 is needed.
@Aurusd As @broody mentioned v01.00.13 bios is required to get Modem working. Below are the slots for both modem and SIM card,
You actually need a SIM card holder one like below to insert into respective slot,
Further if you face any issues in connecting to live network, you might need to update APN as per your operator. Please find the steps to update APN at https://github.com/intel-aero/meta-intel-aero/wiki/08-Aero-Network-and-System-Administration#networking-lte
Ok.. thanks for advise i will try.
Modem now detect correctly!!)) There is somethere document which describe bios version firmware (what support and what no) or i can only solve my problem by publish issue on github?
Only the latest bios (1.00.13) with latest bsp (1.5.1). FC firmware can be any one
Have any body some experience or tutorial how to configure and use telit ln930 or same m2 modem with intel aero drone?