Closed Thanos254 closed 6 years ago
Can you SSH into the board?
My RTF did the same thing. After flashing the update, I re calibrated it using Q Ground Control. After that, the HDMI does not work and it would not turn off with the power button. I unplugged it and now it will boot, I can connect with wifi to Q Ground Control, and I can ssh into it. But still no HDMI. How did you solve this?
Maybe the HDMI adapter is lack of voltage, you can attempt to plug an usb power (5V) in the HDMI adapter.
It is part of the Intel RTF drone. Which is powered by a power supply, and has been working fine, through the full flashing process documented here: https://www.youtube.com/watch?v=e9MLnRbMDHo&list=PLTQSXsG86pGfyZm5ac6-ZtQsEniUJIE9o&index=7 and here https://github.com/intel-aero/meta-intel-aero/wiki/02-Initial-Setup
The procedure went perfectly, but when complete, the HDMI no longer works.
Hi, I used intel drone very well.I installed ubuntu successfully, and I used it well. However, it suddenly did not output any signal from hdmi.After turning on the intel drone, the computer seems like to be powered on, but I cannot see any output from the hdmi.Also, to escape from the sleep mode or something, I pushed the power button after turning on intel drone.But it does not work.(Pushing the power button for a few second to power off does not work neither.) To show LED light patter, I give two links.
https://www.youtube.com/watch?v=2TBXhJqpeJw&feature=youtu.be
https://www.youtube.com/watch?v=3WGj1xQL1zg&feature=youtu.be