ChristophSchmidpeter
commented
9 years ago the dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.17.0-rc4-vgt+ (root@vbm) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP Mon Jan 19 20:59:32 CET 2015 [ 0.000000] Command line: console=tty0 root=/dev/sda8 ro [ 0.000000] Freeing 91-100 pfn range: 111 pages freed [ 0.000000] Freeing bfc6f-bfc76 pfn range: 7 pages freed [ 0.000000] Freeing c0636-c0b00 pfn range: 1226 pages freed [ 0.000000] Freeing c7db3-c8000 pfn range: 589 pages freed [ 0.000000] Freeing c8757-c8800 pfn range: 169 pages freed [ 0.000000] Freeing c8f93-c9000 pfn range: 109 pages freed [ 0.000000] Freeing ca6f5-ca800 pfn range: 267 pages freed [ 0.000000] Freeing cbcea-100000 pfn range: 213782 pages freed [ 0.000000] Released 216260 pages of unused memory [ 0.000000] Set 216260 page(s) to 1-1 mapping [ 0.000000] Populating 7db994-810658 pfn range: 216260 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000090fff] usable [ 0.000000] Xen: [mem 0x0000000000091400-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000bfc6efff] usable [ 0.000000] Xen: [mem 0x00000000bfc6f000-0x00000000bfc75fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bfc76000-0x00000000c0635fff] usable [ 0.000000] Xen: [mem 0x00000000c0636000-0x00000000c0afffff] reserved [ 0.000000] Xen: [mem 0x00000000c0b00000-0x00000000c7db2fff] usable [ 0.000000] Xen: [mem 0x00000000c7db3000-0x00000000c7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000c8000000-0x00000000c8756fff] usable [ 0.000000] Xen: [mem 0x00000000c8757000-0x00000000c87fffff] reserved [ 0.000000] Xen: [mem 0x00000000c8800000-0x00000000c8f92fff] usable [ 0.000000] Xen: [mem 0x00000000c8f93000-0x00000000c8ffffff] ACPI data [ 0.000000] Xen: [mem 0x00000000c9000000-0x00000000ca6f4fff] usable [ 0.000000] Xen: [mem 0x00000000ca6f5000-0x00000000ca7fffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000ca800000-0x00000000cbce9fff] usable [ 0.000000] Xen: [mem 0x00000000cbcea000-0x00000000cbffffff] reserved [ 0.000000] Xen: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000082edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Precision M4800/0FVDR2, BIOS A07 02/18/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x82ee00 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xcbcea max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x810400000-0x8105fffff] [ 0.000000] [mem 0x810400000-0x8105fffff] page 4k [ 0.000000] BRK [0x01bca000, 0x01bcafff] PGTABLE [ 0.000000] BRK [0x01bcb000, 0x01bcbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x810000000-0x8103fffff] [ 0.000000] [mem 0x810000000-0x8103fffff] page 4k [ 0.000000] BRK [0x01bcc000, 0x01bccfff] PGTABLE [ 0.000000] BRK [0x01bcd000, 0x01bcdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x800000000-0x80fffffff] [ 0.000000] [mem 0x800000000-0x80fffffff] page 4k [ 0.000000] BRK [0x01bce000, 0x01bcefff] PGTABLE [ 0.000000] BRK [0x01bcf000, 0x01bcffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfc6efff] [ 0.000000] [mem 0x00100000-0xbfc6efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbfc76000-0xc0635fff] [ 0.000000] [mem 0xbfc76000-0xc0635fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc0b00000-0xc7db2fff] [ 0.000000] [mem 0xc0b00000-0xc7db2fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc8000000-0xc8756fff] [ 0.000000] [mem 0xc8000000-0xc8756fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc8800000-0xc8f92fff] [ 0.000000] [mem 0xc8800000-0xc8f92fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc9000000-0xca6f4fff] [ 0.000000] [mem 0xc9000000-0xca6f4fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xca800000-0xcbce9fff] [ 0.000000] [mem 0xca800000-0xcbce9fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff] [ 0.000000] [mem 0x100000000-0x7ffffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x810600000-0x82edfffff] [ 0.000000] [mem 0x810600000-0x82edfffff] page 4k [ 0.000000] RAMDISK: [mem 0x01f9b000-0x062a4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000082edfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x82edfffff] [ 0.000000] NODE_DATA [mem 0x810654000-0x810657fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x82edfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00090fff] [ 0.000000] node 0: [mem 0x00100000-0xbfc6efff] [ 0.000000] node 0: [mem 0xbfc76000-0xc0635fff] [ 0.000000] node 0: [mem 0xc0b00000-0xc7db2fff] [ 0.000000] node 0: [mem 0xc8000000-0xc8756fff] [ 0.000000] node 0: [mem 0xc8800000-0xc8f92fff] [ 0.000000] node 0: [mem 0xc9000000-0xca6f4fff] [ 0.000000] node 0: [mem 0xca800000-0xcbce9fff] [ 0.000000] node 0: [mem 0x100000000-0x82edfffff] [ 0.000000] On node 0 totalpages: 8364347 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3984 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12943 pages used for memmap [ 0.000000] DMA32 zone: 828331 pages, LIFO batch:31 [ 0.000000] Normal zone: 117688 pages used for memmap [ 0.000000] Normal zone: 7532032 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfc6f000-0xbfc75fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0636000-0xc0afffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7db3000-0xc7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8757000-0xc87fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8f93000-0xc8ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xca6f5000-0xca7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcbcea000-0xcbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88080c400000 s84160 r8192 d22336 u262144 [ 0.000000] pcpu-alloc: s84160 r8192 d22336 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8233631 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=tty0 root=/dev/sda8 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] software IO TLB mem 0x7e3ed5000-0x7e7ed5000 mapped at [ffff8807e3ed5000-ffff8807e7ed4fff] [ 0.000000] Memory: 32154904K/33457388K available (5637K kernel code, 791K rwdata, 3104K rodata, 1040K init, 1116K bss, 1302484K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 0 [ 0.000000] xen:events: Using 2-level ABI [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 2394.536 MHz processor [ 3.281008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.07 BogoMIPS (lpj=2394536) [ 3.281415] pid_max: default: 32768 minimum: 301 [ 3.281546] ACPI: Core revision 20140724 [ 3.312982] Security Framework initialized [ 3.316362] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 3.321613] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 3.323614] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 3.323862] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 3.324507] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 3.324707] CPU: Physical Processor ID: 0 [ 3.324824] CPU: Processor Core ID: 0 [ 3.325692] mce: CPU supports 2 MCE banks [ 3.325977] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 3.326344] Freeing SMP alternatives memory: 24K (ffffffff81a58000 - ffffffff81a5e000) [ 3.327247] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 3.327807] installing Xen timer for CPU 1 [ 3.328898] installing Xen timer for CPU 2 [ 3.329972] installing Xen timer for CPU 3 [ 3.331085] installing Xen timer for CPU 4 [ 3.332202] installing Xen timer for CPU 5 [ 3.333343] installing Xen timer for CPU 6 [ 3.334500] installing Xen timer for CPU 7 [ 3.335633] x86: Booted up 1 node, 8 CPUs [ 3.336176] devtmpfs: initialized [ 3.336854] PM: Registering ACPI NVS region [mem 0xbfc6f000-0xbfc75fff](28672 bytes) [ 3.337120] PM: Registering ACPI NVS region [mem 0xca6f5000-0xca7fffff](1093632 bytes) [ 3.337542] RTC time: 19:46:02, date: 01/21/15 [ 3.337753] NET: Registered protocol family 16 [ 3.337933] xen:grant_table: Grant tables using version 1 layout [ 3.338059] Grant table initialized [ 3.338475] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 3.338662] ACPI: bus type PCI registered [ 3.339031] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff](base 0xf8000000) [ 3.339274] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 3.343549] PCI: Using configuration type 1 for base access [ 3.343700] dmi type 0xB1 record - unknown flag [ 3.350339] ACPI: Added _OSI(Module Device) [ 3.350480] ACPI: Added _OSI(Processor Device) [ 3.350625] ACPI: Added _OSI(3.0 _SCP Extensions) [ 3.350784] ACPI: Added _OSI(Processor Aggregator Device) [ 3.353785] ACPI: SCI (ACPI GSI 9) not registered [ 3.370699] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 3.537243] ACPI: Interpreter enabled [ 3.537397] ACPI: (supports S0 S3 S4 S5) [ 3.537539] ACPI: Using IOAPIC for interrupt routing [ 3.537868] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.919348] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-3e]) [ 3.919644] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.920173] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 3.920567] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 3.921115] PCI host bridge to bus 0000:00 [ 3.921347] pci_bus 0000:00: root bus resource [bus 00-3e] [ 3.921617] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 3.921883] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 3.922167] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 3.922424] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 3.922714] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 3.923003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 3.923309] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff] [ 3.923549] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 3.923938] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 3.924227] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 3.924428] pci 0000:00:01.0: System wakeup disabled by ACPI [ 3.924808] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 3.925012] pci 0000:00:02.0: reg 0x10: [mem 0xf5400000-0xf57fffff 64bit] [ 3.925250] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 3.925425] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 3.925796] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 3.925992] pci 0000:00:03.0: reg 0x10: [mem 0xf7a34000-0xf7a37fff 64bit] [ 3.926421] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 3.926641] pci 0000:00:14.0: reg 0x10: [mem 0xf7a20000-0xf7a2ffff 64bit] [ 3.926966] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.927177] pci 0000:00:14.0: System wakeup disabled by ACPI [ 3.927541] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 3.927760] pci 0000:00:16.0: reg 0x10: [mem 0xf7a40000-0xf7a4000f 64bit] [ 3.928097] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 3.928410] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 3.928644] pci 0000:00:19.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff] [ 3.928830] pci 0000:00:19.0: reg 0x14: [mem 0xf7a3d000-0xf7a3dfff] [ 3.929027] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 3.929330] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 3.940440] pci 0000:00:19.0: System wakeup disabled by ACPI [ 3.940887] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 3.941113] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a3c000-0xf7a3c3ff] [ 3.941457] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 3.941701] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 3.942082] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 3.942321] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a30000-0xf7a33fff 64bit] [ 3.942705] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 3.942905] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 3.943298] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 3.943629] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.943829] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 3.944108] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 3.944391] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 3.944802] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 3.945158] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 3.945326] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 3.945592] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 3.945878] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 3.946281] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 3.946626] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 3.946797] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 3.947074] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 3.947349] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 3.947704] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 3.948069] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 3.948240] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 3.948518] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 3.948792] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 3.949180] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 3.949531] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 3.949714] pci 0000:00:1c.6: Enabling MPC IRBNCE [ 3.949963] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled [ 3.950246] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 3.950614] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400 [ 3.950966] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 3.951135] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 3.951410] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 3.951690] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 3.952046] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 3.952253] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a3b000-0xf7a3b3ff] [ 3.952659] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 3.952874] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3.953210] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100 [ 3.953733] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 3.953925] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 3.954098] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 3.954270] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 3.954465] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 3.954639] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 3.954853] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a3a000-0xf7a3a7ff] [ 3.955093] pci 0000:00:1f.2: PME# supported from D3hot [ 3.955373] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 3.955579] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a39000-0xf7a390ff 64bit] [ 3.955798] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 3.956196] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000 [ 3.956389] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff] [ 3.956630] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 3.956842] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 3.957035] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 3.957225] pci 0000:01:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref] [ 3.957496] pci 0000:01:00.0: System wakeup disabled by ACPI [ 3.958923] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.959203] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 3.959379] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff] [ 3.959582] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 3.959892] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 3.960357] pci 0000:03:00.0: [14e4:43b1] type 00 class 0x028000 [ 3.960601] pci 0000:03:00.0: reg 0x10: [mem 0xf5a00000-0xf5a07fff 64bit] [ 3.960842] pci 0000:03:00.0: reg 0x18: [mem 0xf5800000-0xf59fffff 64bit] [ 3.961314] pci 0000:03:00.0: supports D1 D2 [ 3.961487] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.961724] pci 0000:03:00.0: System wakeup disabled by ACPI [ 3.963266] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 3.963549] pci 0000:00:1c.2: bridge window [mem 0xf5800000-0xf5afffff] [ 3.963818] pci 0000:00:1c.3: PCI bridge to [bus 04-07] [ 3.964056] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 3.964269] pci 0000:00:1c.3: bridge window [mem 0xf6f00000-0xf78fffff] [ 3.964505] pci 0000:00:1c.3: bridge window [mem 0xf3500000-0xf3efffff 64bit pref] [ 3.964763] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 3.965008] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 3.965215] pci 0000:00:1c.4: bridge window [mem 0xf6500000-0xf6efffff] [ 3.965432] pci 0000:00:1c.4: bridge window [mem 0xf2b00000-0xf34fffff 64bit pref] [ 3.965716] pci 0000:00:1c.6: PCI bridge to [bus 09-10] [ 3.965955] pci 0000:00:1c.6: bridge window [io 0xa000-0xbfff] [ 3.966135] pci 0000:00:1c.6: bridge window [mem 0xf5b00000-0xf64fffff] [ 3.966366] pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf2afffff 64bit pref] [ 3.966744] pci 0000:11:00.0: [1217:8520] type 00 class 0x080501 [ 3.967013] pci 0000:11:00.0: reg 0x10: [mem 0xf7901000-0xf7901fff] [ 3.967272] pci 0000:11:00.0: reg 0x14: [mem 0xf7900000-0xf79007ff] [ 3.967744] pci 0000:11:00.0: PME# supported from D3hot D3cold [ 3.968004] pci 0000:11:00.0: System wakeup disabled by ACPI [ 3.970140] pci 0000:00:1c.7: PCI bridge to [bus 11] [ 3.970404] pci 0000:00:1c.7: bridge window [mem 0xf7900000-0xf79fffff] [ 3.970803] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 3.971383] xen: registering gsi 13 triggering 1 polarity 0 [ 4.006112] xen: registering gsi 23 triggering 1 polarity 0 [ 4.006184] xen: --> pirq=23 -> irq=23 (gsi=23) [ 4.006251] ACPI: PCI Interrupt Link [LNKA](IRQs 3 4 5 6 10 11 12 14 15) [ 4.006693] ACPI: PCI Interrupt Link [LNKB](IRQs 3 4 5 6 10 11 12 14 15) [ 4.007046] ACPI: PCI Interrupt Link [LNKC](IRQs 3 4 5 6 10 11 12 14 15) [ 4.007404] ACPI: PCI Interrupt Link [LNKD](IRQs 3 4 5 6 10 11 12 14 15) [ 4.007804] ACPI: PCI Interrupt Link [LNKE](IRQs 3 4 5 6 10 11 12 14 15) [ 4.008156] ACPI: PCI Interrupt Link [LNKF](IRQs 3 4 5 6 10 11 12 14 15) [ 4.008530] ACPI: PCI Interrupt Link [LNKG](IRQs 3 4 5 6 10 11 12 14 15) [ 4.008942] ACPI: PCI Interrupt Link [LNKH](IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 4.073284] ACPI : EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 [ 4.073514] xen:balloon: Initialising balloon driver [ 4.074687] xen_balloon: Initialising balloon driver [ 4.074971] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 4.075237] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 4.075395] vgaarb: loaded [ 4.075543] vgaarb: bridge control possible 0000:01:00.0 [ 4.075698] vgaarb: no bridge control possible 0000:00:02.0 [ 4.075879] SCSI subsystem initialized [ 4.076052] libata version 3.00 loaded. [ 4.076120] ACPI: bus type USB registered [ 4.076301] usbcore: registered new interface driver usbfs [ 4.076462] usbcore: registered new interface driver hub [ 4.076639] usbcore: registered new device driver usb [ 4.076875] PCI: Using ACPI for IRQ routing [ 4.080787] PCI: pci_cache_line_size set to 64 bytes [ 4.080975] e820: reserve RAM buffer [mem 0x00091000-0x0009ffff] [ 4.081068] e820: reserve RAM buffer [mem 0xbfc6f000-0xbfffffff] [ 4.081163] e820: reserve RAM buffer [mem 0xc0636000-0xc3ffffff] [ 4.081255] e820: reserve RAM buffer [mem 0xc7db3000-0xc7ffffff] [ 4.081348] e820: reserve RAM buffer [mem 0xc8757000-0xcbffffff] [ 4.081443] e820: reserve RAM buffer [mem 0xc8f93000-0xcbffffff] [ 4.081538] e820: reserve RAM buffer [mem 0xca6f5000-0xcbffffff] [ 4.081633] e820: reserve RAM buffer [mem 0xcbcea000-0xcbffffff] [ 4.081730] e820: reserve RAM buffer [mem 0x82ee00000-0x82fffffff] [ 4.081856] NetLabel: Initializing [ 4.081989] NetLabel: domain hash size = 128 [ 4.082135] NetLabel: protocols = UNLABELED CIPSOv4 [ 4.082299] NetLabel: unlabeled traffic allowed by default [ 4.082492] Switched to clocksource xen [ 4.084456] pnp: PnP ACPI init [ 4.084743] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 4.084986] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.085239] system 00:01: [io 0x0680-0x069f] has been reserved [ 4.085448] system 00:01: [io 0xffff] has been reserved [ 4.085659] system 00:01: [io 0xffff] has been reserved [ 4.085864] system 00:01: [io 0xffff] has been reserved [ 4.086080] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 4.086299] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 4.086523] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 4.086748] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 4.086979] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 4.087201] system 00:01: [io 0x164e-0x164f] has been reserved [ 4.087441] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.087535] xen: registering gsi 8 triggering 1 polarity 0 [ 4.087714] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 4.087895] system 00:03: [io 0x1854-0x1857] has been reserved [ 4.088150] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 4.088324] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 4.088565] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.088665] xen: registering gsi 1 triggering 1 polarity 0 [ 4.088841] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 4.088934] xen: registering gsi 12 triggering 1 polarity 0 [ 4.089119] pnp 00:06: Plug and Play ACPI device, IDs DLL05cc PNP0f13 (active) [ 4.108714] xen: registering gsi 4 triggering 1 polarity 0 [ 4.108970] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 4.126808] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 4.127424] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 4.127686] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 4.127921] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 4.128158] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 4.128391] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 4.128646] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 4.128882] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 4.129115] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 4.129348] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 4.129602] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 4.129839] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 4.130072] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 4.130310] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.223625] pnp: PnP ACPI: found 10 devices [ 4.225658] random: nonblocking pool is initialized [ 4.229438] PM-Timer failed consistency check (0xffffff) - aborting. [ 4.229755] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.229992] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 4.230247] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff] [ 4.230522] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 4.230796] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 4.231029] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 4.231284] pci 0000:00:1c.2: bridge window [mem 0xf5800000-0xf5afffff] [ 4.231520] pci 0000:00:1c.3: PCI bridge to [bus 04-07] [ 4.231763] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 4.232019] pci 0000:00:1c.3: bridge window [mem 0xf6f00000-0xf78fffff] [ 4.232295] pci 0000:00:1c.3: bridge window [mem 0xf3500000-0xf3efffff 64bit pref] [ 4.232573] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 4.232811] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 4.233070] pci 0000:00:1c.4: bridge window [mem 0xf6500000-0xf6efffff] [ 4.233344] pci 0000:00:1c.4: bridge window [mem 0xf2b00000-0xf34fffff 64bit pref] [ 4.233625] pci 0000:00:1c.6: PCI bridge to [bus 09-10] [ 4.233866] pci 0000:00:1c.6: bridge window [io 0xa000-0xbfff] [ 4.234123] pci 0000:00:1c.6: bridge window [mem 0xf5b00000-0xf64fffff] [ 4.234398] pci 0000:00:1c.6: bridge window [mem 0xf2100000-0xf2afffff 64bit pref] [ 4.234675] pci 0000:00:1c.7: PCI bridge to [bus 11] [ 4.234931] pci 0000:00:1c.7: bridge window [mem 0xf7900000-0xf79fffff] [ 4.235175] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 4.235329] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 4.235500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 4.235669] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff] [ 4.235839] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff] [ 4.236009] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff] [ 4.236179] pci_bus 0000:00: resource 10 [mem 0xcf200000-0xfeafffff] [ 4.236344] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 4.236516] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf50fffff] [ 4.236707] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 4.236880] pci_bus 0000:03: resource 1 [mem 0xf5800000-0xf5afffff] [ 4.237038] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 4.237208] pci_bus 0000:04: resource 1 [mem 0xf6f00000-0xf78fffff] [ 4.237398] pci_bus 0000:04: resource 2 [mem 0xf3500000-0xf3efffff 64bit pref] [ 4.237554] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] [ 4.237725] pci_bus 0000:08: resource 1 [mem 0xf6500000-0xf6efffff] [ 4.237912] pci_bus 0000:08: resource 2 [mem 0xf2b00000-0xf34fffff 64bit pref] [ 4.238071] pci_bus 0000:09: resource 0 [io 0xa000-0xbfff] [ 4.238238] pci_bus 0000:09: resource 1 [mem 0xf5b00000-0xf64fffff] [ 4.238428] pci_bus 0000:09: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref] [ 4.238603] pci_bus 0000:11: resource 1 [mem 0xf7900000-0xf79fffff] [ 4.238684] NET: Registered protocol family 2 [ 4.239246] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 4.239787] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.240048] TCP: Hash tables configured (established 262144 bind 65536) [ 4.240173] TCP: reno registered [ 4.240410] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 4.240702] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 4.240915] NET: Registered protocol family 1 [ 4.241150] RPC: Registered named UNIX socket transport module. [ 4.241291] RPC: Registered udp transport module. [ 4.241433] RPC: Registered tcp transport module. [ 4.241614] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.241830] pci 0000:00:02.0: Boot video device [ 4.241978] xen: registering gsi 16 triggering 0 polarity 1 [ 4.242052] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.255002] xen: registering gsi 16 triggering 0 polarity 1 [ 4.255049] Already setup the GSI :16 [ 4.270746] xen: registering gsi 21 triggering 0 polarity 1 [ 4.270817] xen: --> pirq=21 -> irq=21 (gsi=21) [ 4.285740] PCI: CLS 64 bytes, default 64 [ 4.285875] Trying to unpack rootfs image as initramfs... [ 4.319806] Freeing initrd memory: 68648K (ffff880001f9b000 - ffff8800062a5000) [ 4.320603] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 4.321648] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 4.321841] audit: initializing netlink subsys (disabled) [ 4.322027] audit: type=2000 audit(1421869564.256:1): initialized [ 4.322448] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.323697] VFS: Disk quotas dquot_6.5.2 [ 4.323896] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.324234] NFS: Registering the id_resolver key type [ 4.324373] Key type id_resolver registered [ 4.324500] Key type id_legacy registered [ 4.324685] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.324991] msgmni has been set to 32768 [ 4.325578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.325761] io scheduler noop registered [ 4.325890] io scheduler deadline registered [ 4.326046] io scheduler cfq registered (default) [ 4.326307] xen: registering gsi 16 triggering 0 polarity 1 [ 4.326359] Already setup the GSI :16 [ 4.326655] xen: registering gsi 16 triggering 0 polarity 1 [ 4.326704] Already setup the GSI :16 [ 4.326979] xen: registering gsi 18 triggering 0 polarity 1 [ 4.327050] xen: --> pirq=18 -> irq=18 (gsi=18) [ 4.327255] xen: registering gsi 19 triggering 0 polarity 1 [ 4.327324] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.327534] xen: registering gsi 16 triggering 0 polarity 1 [ 4.327588] Already setup the GSI :16 [ 4.329345] xen: registering gsi 18 triggering 0 polarity 1 [ 4.329396] Already setup the GSI :18 [ 4.329682] xen: registering gsi 19 triggering 0 polarity 1 [ 4.329731] Already setup the GSI :19 [ 4.329988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.330292] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 4.332636] ACPI: Lid Switch [LID0] [ 4.332876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 4.333053] ACPI: Power Button [PBTN] [ 4.333290] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 4.333465] ACPI: Sleep Button [SBTN] [ 4.333695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.333869] ACPI: Power Button [PWRF] [ 4.334270] Monitor-Mwait will be used to enter C-1 state [ 4.334371] Monitor-Mwait will be used to enter C-2 state [ 4.335289] Warning: Processor Platform Limit not supported. [ 4.370729] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.370859] ACPI: Thermal Zone [THM](25 C) [ 4.371279] xen:xen_evtchn: Event-channel device installed [ 4.371564] xen_pciback: backend is vpci [ 4.372017] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.393168] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.393898] hpet_acpi_add: no address or irqs in _CRS [ 4.394091] Non-volatile memory driver v1.3 [ 4.394220] Linux agpgart interface v0.103 [ 4.394375] [drm] Initialized drm 1.1.0 20060810 [ 4.394547] vGT info:(vgt_set_device_type:455) Detected Haswell [ 4.394656] GEN device info: [ 4.394771] major: 7 minor: 5 rev: 0 [ 4.394890] max_gtt_gm_sz: 80000000 [ 4.395005] gtt_start_offset: 200000 [ 4.395118] max_gtt_size: 400000 [ 4.395226] gtt_size_entry: 4 [ 4.395343] gtt_entry_size_shift: 2. [ 4.395849] bar-0 size: 400000 [ 4.395962] bar-1 size: 10000000 [ 4.396061] bar-2 size: 40 [ 4.396193] bar0: 0xf5400004, Bar1: 0xd000000c [ 4.396330] mmio size: 200000, gtt size: 200000 [ 4.396470] gttmmio: 0xf5400000, gmadr: 0xd0000000 [ 4.396651] VGT: vgt_io_trap: pio 0 [ 3b0 - 3df ] [ 4.396825] VGT: vgt_io_trap: mmio 0 [ f5400000 - f57ff000 ] [ 4.396970] VGT: install GP handler successfully [ 4.413488] gmadr_va: 0xffffc90007900000 [ 4.430544] vGT: GMBUS2 init value: 0, 800 [ 4.431161] vGT info:(initialize_gm_fence_allocation_bitmaps:316) total aperture: 0x10000000 bytes, total GM space: 0x80000000 bytes [ 4.431474] vGT info:(initialize_gm_fence_allocation_bitmaps:338) reserved aperture: [0xdf800000, 0xe0000000) [ 4.431690] vGT: setup tracked reg info [ 4.432113] 755 listed, 655 used [ 4.432240] total 68280 registers tracked [ 4.432373] post mmio hooks initialized [ 4.432628] vGT: irq map [upstream] group: 1, bit: 28 -> [downstream] group: 2, bitmask: 0xffffffff [ 4.432843] scratch page is allocated at gm(0xf800000) [ 4.433202] vGT info:(create_vgt_instance:120) vm_id=0, low_gm_sz=120MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1 [ 4.434396] vGT info:(create_vgt_instance:171) Virtual GTT size: 0x200000 [ 4.434934] VM0 Ring0 context_save_area is allocated at gm(f811000) [ 4.435151] VM0 Ring1 context_save_area is allocated at gm(f851000) [ 4.435367] VM0 Ring2 context_save_area is allocated at gm(f891000) [ 4.435592] VM0 Ring3 context_save_area is allocated at gm(f8d1000) [ 4.435916] vGT info:(create_vgt_instance:214) aperture: [0xd0000000, 0xd77fffff] guest [0xd0000000, 0xd77fffff] va(0xffffc90007900000) [ 4.436288] vGT info:(create_vgt_instance:225) GM: [0x0, 0x77fffff], [0x10000000, 0x27ffffff], guest[0x0, 0x77fffff], [0x10000000, 0x27ffffff] [ 4.437436] vGT info:(create_vgt_instance:262) filling VGT_PVINFO_PAGE for dom0: visable_gm_base=0x0, size=0x7800000 hidden_gm_base=0x10000000, size=0x18000000 fence_base=0, num=4 [ 4.437866] vGT(0): create debugfs node: virtual_mmio_space [ 4.438030] vGT(0): create debugfs node: shadow_mmio_space [ 4.438197] vGT(0): create debugfs node: frame_buffer_format [ 4.438361] vGT(0): create debugfs node: frame_buffer_format [ 4.438602] vGT: clear all GTT entries. [ 4.438836] ....dummy page (0x5db9000, 0x1c0000) [ 4.520047] vGT: allocate vGT aperture [ 4.522238] Eddie: xen_vgt_dom0_ready ffffc90017d03000 [ 4.522461] vGT: start kthread for dev (0, 10) [ 4.522520] vgt_initialize succeeds. [ 4.522574] i915: xen_start_vgt done [ 4.522739] xen: registering gsi 16 triggering 0 polarity 1 [ 4.522790] Already setup the GSI :16 [ 4.523325] i915: intel_detect_pch [ 4.523586] vGT warning:(fpga_dbg_mmio_write:2234) VM 0 writes FPGA_DBG register: 80000000. [ 4.524023] [drm] Memory usable by graphics device = 2048M [ 4.524168] [drm] Replacing VGA console driver [ 4.525357] Console: switching to colour dummy device 80x25 [ 4.541769] Failed to add WC MTRR for [00000000d0000000-00000000dfffffff]; performance may suffer.VM0 write register RC_STATE_CTRL_1 with 0x0 [ 4.593621] i915: the number of the fence registers (4) [ 4.593794] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.593893] [drm] Driver supports precise vblank timestamp query. [ 4.594146] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 4.594277] vGT: setup vGT irq hook in ironlake_irq_reset [ 4.594402] vGT: found matching pgt_device when registering irq for dev (0x10) [ 4.594548] vGT: allocate virq (77) for i915, while keep original irq (76) for vgt [ 4.594603] vGT: track_nest: enabled [ 4.595070] vGT info:(vga_control_w:1777) VM(0): Disable VGA mode 8000298e [ 4.596018] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (AUX Channel A) [ 4.596177] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (AUX Channel A) [ 4.625315] Eddie: mappable_end 10000000 [ 4.625348] i915 ballooning. [ 4.625398] Ballooning configuration: [ 4.625458] Low GM: base 0x0 size 122880KB [ 4.625554] High GM: base 0x10000000 size 393216KB [ 4.625681] i915_balloon_space: range [ 0x27dff000 - 0x80000000 ] 1443844 KB. [ 4.625800] i915_balloon_space: range [ 0x77ff000 - 0x10000000 ] 139268 KB. [ 4.625841] balloon successfully [ 4.758894] vGT: activate vgt (0) on ring (0) [ 4.758958] vGT-0: add to render run queue! [ 4.770471] vGT: activate vgt (0) on ring (1) [ 4.770711] vGT: activate vgt (0) on ring (2) [ 4.770891] vGT: activate vgt (0) on ring (3) [ 4.771006] PPGTT enabling on ring 0 [ 4.771052] PPGTT enabling on ring 1 [ 4.771100] PPGTT enabling on ring 2 [ 4.771147] PPGTT enabling on ring 3 [ 4.771290] vGT info:(vgt_setup_ppgtt:621) vgt_setup_ppgtt on vm 0: PDE base 0x27bf0000 [ 4.780769] ACPI: Video Device [PEGP](multi-head: yes rom: yes post: no) [ 4.785172] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (Gmbus) [ 4.785322] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (Gmbus) [ 4.794787] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input4 [ 4.798684] ACPI: Video Device [GFX0](multi-head: yes rom: no post: no) [ 4.799338] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (AUX Channel D) [ 4.799514] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (AUX Channel D) [ 4.813777] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5 [ 4.813934] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0 [ 4.815133] brd: module loaded [ 4.815286] ahci 0000:00:1f.2: version 3.0 [ 4.815424] xen: registering gsi 19 triggering 0 polarity 1 [ 4.815476] Already setup the GSI :19 [ 4.815735] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.815971] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl RAID mode [ 4.816195] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst [ 4.823926] scsi host0: ahci [ 4.824124] scsi host1: ahci [ 4.824286] scsi host2: ahci [ 4.824439] scsi host3: ahci [ 4.824599] scsi host4: ahci [ 4.824765] scsi host5: ahci [ 4.824920] ata1: SATA max UDMA/133 abar m2048@0xf7a3a000 port 0xf7a3a100 irq 78 [ 4.825048] ata2: SATA max UDMA/133 abar m2048@0xf7a3a000 port 0xf7a3a180 irq 78 [ 4.825172] ata3: SATA max UDMA/133 abar m2048@0xf7a3a000 port 0xf7a3a200 irq 78 [ 4.825298] ata4: SATA max UDMA/133 abar m2048@0xf7a3a000 port 0xf7a3a280 irq 78 [ 4.825423] ata5: SATA max UDMA/133 abar m2048@0xf7a3a000 port 0xf7a3a300 irq 78 [ 4.825446] ata6: DUMMY [ 4.825739] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.826345] i8042: Warning: Keylock active [ 4.828730] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.828809] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.828976] mousedev: PS/2 mouse device common for all mice [ 4.829337] rtc_cmos 00:02: RTC can wake from S4 [ 4.829661] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.829864] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 4.829980] hidraw: raw HID events driver (C) Jiri Kosina [ 4.830244] usbcore: registered new interface driver usbhid [ 4.830299] usbhid: USB HID core driver [ 4.830400] TCP: cubic registered [ 4.830470] NET: Registered protocol family 17 [ 4.830822] sctp: Hash tables configured (established 65536 bind 65536) [ 4.831004] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 4.831155] Key type dns_resolver registered [ 4.831465] registered taskstats version 1 [ 4.832255] Magic number: 15:797:799 [ 4.832426] platform PNP0C09:00: hash matches [ 4.832575] ec PNP0C09:00: hash matches [ 4.832750] PM: Hibernation image not present or could not be loaded. [ 5.131678] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.135287] ata1.00: ATA-8: WDC WD7500BPKX-75HPJT0, 01.01A01, max UDMA/133 [ 5.135412] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.139075] ata1.00: configured for UDMA/133 [ 5.410277] fbcon: inteldrmfb (fb0) is primary device [ 5.701425] vGT error:(vgt_handle_events:1819) IRQ: abandon non-registered [PCH-IRQ, bit-16] event (RESERVED EVENTS!!!) [ 5.702707] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (Primary Plane A flip done) [ 5.702878] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (Primary Plane B flip done) [ 5.703057] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (Primary Plane A flip done) [ 5.703257] vGT error:(vgt_handle_events:1819) IRQ: abandon non-registered [DPY-IRQ, bit-30] event (RESERVED EVENTS!!!) [ 5.703448] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (Primary Plane B flip done) [ 5.722213] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event ((null)) [ 5.722395] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event ((null)) [ 5.851860] Console: switching to colour frame buffer device 240x67 [ 5.982463] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.983167] i915 0000:00:02.0: registered panic notifier [ 5.988840] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKX-7 1A01 PQ: 0 ANSI: 5 [ 6.033619] VM0 write register RC_STATE_CTRL_1 with 0x0 [ 6.034379] VM0 write register RC_STATE_CTRL_1 with 0x0 [ 6.034999] VM0 write register RC_STATE_CTRL_1 with 0x88040000 [ 6.200619] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input9 [ 6.213849] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 6.294639] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.298051] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A100, max UDMA/100 [ 6.301511] ata2.00: configured for UDMA/100 [ 6.306822] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A100 PQ: 0 ANSI: 5 [ 6.623622] ata3: SATA link down (SStatus 0 SControl 300) [ 6.928681] ata4: SATA link down (SStatus 0 SControl 300) [ 7.233688] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.237024] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 7.237163] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 7.238059] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 7.239208] ata5.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133 [ 7.240011] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 7.241272] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 7.241405] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 7.242270] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 7.243415] ata5.00: configured for UDMA/133 [ 7.244209] scsi 4:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5 [ 7.245862] Freeing unused kernel memory: 1040K (ffffffff81954000 - ffffffff81a58000) [ 7.261738] device-mapper: uevent: version 1.0.3 [ 7.262413] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 7.374046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.374722] xen: registering gsi 16 triggering 0 polarity 1 [ 7.374784] Already setup the GSI :16 [ 7.374988] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.375279] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 7.375565] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 7.375795] sd 4:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 7.376010] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 7.376208] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 7.376371] sd 4:0:0:0: [sdb] Write Protect is off [ 7.376565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.376697] sd 0:0:0:0: [sda] Write Protect is off [ 7.376867] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.377068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.377243] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.377507] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.377649] usb usb1: Product: xHCI Host Controller [ 7.377843] usb usb1: Manufacturer: Linux 3.17.0-rc4-vgt+ xhci_hcd [ 7.378106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.378248] usb usb1: SerialNumber: 0000:00:14.0 [ 7.378273] sdb: sdb1 [ 7.378508] hub 1-0:1.0: USB hub found [ 7.378645] sd 4:0:0:0: [sdb] Attached SCSI disk [ 7.378774] hub 1-0:1.0: 15 ports detected [ 7.383041] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 7.383646] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 7.383915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.384096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.384218] usb usb2: Product: xHCI Host Controller [ 7.384368] usb usb2: Manufacturer: Linux 3.17.0-rc4-vgt+ xhci_hcd [ 7.384484] usb usb2: SerialNumber: 0000:00:14.0 [ 7.384772] hub 2-0:1.0: USB hub found [ 7.384938] hub 2-0:1.0: 6 ports detected [ 7.465363] sda: sda5 sda6 sda7 sda8 [ 7.465899] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.723822] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd [ 7.754053] usb 2-3: New USB device found, idVendor=413c, idProduct=5534 [ 7.754226] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 7.754326] usb 2-3: Product: USB5534 [ 7.754430] usb 2-3: Manufacturer: SMSC [ 7.754880] hub 2-3:1.0: USB hub found [ 7.755016] hub 2-3:1.0: 3 ports detected [ 7.875284] usb 2-6: new SuperSpeed USB device number 3 using xhci_hcd [ 7.911296] usb 2-6: New USB device found, idVendor=0b95, idProduct=1790 [ 7.911644] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.911837] usb 2-6: Product: AX88179 [ 7.912094] usb 2-6: Manufacturer: ASIX Elec. Corp. [ 7.912315] usb 2-6: SerialNumber: 00000000000054 [ 8.082696] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 8.225177] usb 1-4: New USB device found, idVendor=413c, idProduct=2134 [ 8.225511] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.225708] usb 1-4: Product: USB2134 [ 8.225893] usb 1-4: Manufacturer: SMSC [ 8.226439] hub 1-4:1.0: USB hub found [ 8.226588] hub 1-4:1.0: 3 ports detected [ 8.390828] usb 1-13: new high-speed USB device number 3 using xhci_hcd [ 8.577832] usb 1-13: New USB device found, idVendor=413c, idProduct=2513 [ 8.577999] usb 1-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.578575] hub 1-13:1.0: USB hub found [ 8.578719] hub 1-13:1.0: 3 ports detected [ 8.885722] usb 1-13.3: new low-speed USB device number 4 using xhci_hcd [ 8.958382] ehci-pci: EHCI PCI platform driver [ 8.979723] usb 1-13.3: New USB device found, idVendor=413c, idProduct=2107 [ 8.979898] usb 1-13.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.980029] usb 1-13.3: Product: Dell USB Entry Keyboard [ 8.980135] usb 1-13.3: Manufacturer: Dell [ 8.980630] usb 1-13.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 8.985233] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.0/0003:413C:2107.0001/input/input10 [ 8.985971] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-13.3/input0 [ 9.159860] xen: registering gsi 16 triggering 0 polarity 1 [ 9.159914] Already setup the GSI :16 [ 9.186359] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 9.212775] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 9.212945] usb 1-13.2: new high-speed USB device number 5 using xhci_hcd [ 9.266091] ehci-pci 0000:00:1a.0: debug port 2 [ 9.296279] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 9.296452] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a3c000 [ 9.328693] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 9.329575] usb 1-13.2: New USB device found, idVendor=0b95, idProduct=1790 [ 9.329750] usb 1-13.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.329849] usb 1-13.2: Product: AX88179 [ 9.329974] usb 1-13.2: Manufacturer: ASIX Elec. Corp. [ 9.330101] usb 1-13.2: SerialNumber: 0000000000045A [ 9.480823] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.505792] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.531002] usb usb3: Product: EHCI Host Controller [ 9.556103] usb usb3: Manufacturer: Linux 3.17.0-rc4-vgt+ ehci_hcd [ 9.581348] usb usb3: SerialNumber: 0000:00:1a.0 [ 9.606525] hub 3-0:1.0: USB hub found [ 9.631560] hub 3-0:1.0: 2 ports detected [ 9.656324] xen: registering gsi 21 triggering 0 polarity 1 [ 9.656373] Already setup the GSI :21 [ 9.681008] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 9.698720] usb 1-13.1: new high-speed USB device number 6 using xhci_hcd [ 9.730132] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 9.755702] ehci-pci 0000:00:1d.0: debug port 2 [ 9.784034] usb 1-13.1: New USB device found, idVendor=2109, idProduct=2812 [ 9.785111] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 9.785281] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7a3b000 [ 9.790692] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 9.790875] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.791047] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.791170] usb usb4: Product: EHCI Host Controller [ 9.791315] usb usb4: Manufacturer: Linux 3.17.0-rc4-vgt+ ehci_hcd [ 9.791434] usb usb4: SerialNumber: 0000:00:1d.0 [ 9.791657] hub 4-0:1.0: USB hub found [ 9.791774] hub 4-0:1.0: 2 ports detected [ 10.044454] usb 1-13.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.044595] usb 1-13.1: Product: USB 2.0 HUB
[ 10.045363] hub 1-13.1:1.0: USB hub found
[ 10.045759] hub 1-13.1:1.0: 4 ports detected
[ 10.156688] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 10.272037] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 10.272188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.272550] hub 3-1:1.0: USB hub found
[ 10.272748] hub 3-1:1.0: 6 ports detected
[ 10.375621] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 10.490032] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 10.517173] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.517555] hub 4-1:1.0: USB hub found
[ 10.517752] hub 4-1:1.0: 8 ports detected
[ 10.594845] usb 1-13.1.3: new low-speed USB device number 7 using xhci_hcd
[ 10.686175] usb 1-13.1.3: New USB device found, idVendor=046d, idProduct=c012
[ 10.714191] usb 1-13.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.741801] usb 1-13.1.3: Product: USB-PS/2 Optical Mouse
[ 10.769366] usb 1-13.1.3: Manufacturer: Logitech
[ 10.769680] usb 1-13.1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 10.829541] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1.3/1-13.1.3:1.0/0003:046D:C012.0002/input/input11
[ 10.830061] hid-generic 0003:046D:C012.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-13.1.3/input0
[ 11.181387] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 11.184679] usb 2-6: USB disconnect, device number 3
[ 11.418121] usb 2-6: new SuperSpeed USB device number 4 using xhci_hcd
[ 11.465129] usb 2-6: New USB device found, idVendor=0b95, idProduct=1790
[ 11.494408] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.524137] usb 2-6: Product: AX88179
[ 11.553343] usb 2-6: Manufacturer: ASIX Elec. Corp.
[ 11.582525] usb 2-6: SerialNumber: 00000000000054
[ 11.687812] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 11.858697] usb 3-1.5: New USB device found, idVendor=1bcf, idProduct=2984
[ 11.888184] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.917570] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD
[ 11.946702] usb 3-1.5: Manufacturer: SunplusIT Inc
[ 12.118829] usb 4-1.5: new full-speed USB device number 3 using ehci-pci
[ 12.236555] usb 4-1.5: New USB device found, idVendor=413c, idProduct=8143
[ 12.265600] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.294404] usb 4-1.5: Product: BCM20702A0
[ 12.323487] usb 4-1.5: Manufacturer: Broadcom Corp
[ 12.352632] usb 4-1.5: SerialNumber: 40F02FF847E8
[ 12.420290] systemd[1]: Inserted module 'autofs4'
[ 12.449452] systemd[1]: Failed to insert module 'ipv6'
[ 12.478807] usb 4-1.8: new full-speed USB device number 4 using ehci-pci
[ 12.531617] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 12.562890] systemd[1]: Detected virtualization 'xen'.
[ 12.593598] systemd[1]: Detected architecture 'x86-64'.
[ 12.679788] usb 4-1.8: New USB device found, idVendor=0a5c, idProduct=5800
[ 12.679944] usb 4-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.680029] usb 4-1.8: Product: 5880
[ 12.680144] usb 4-1.8: Manufacturer: Broadcom Corp
[ 12.680254] usb 4-1.8: SerialNumber: 0123456789ABCD
[ 12.680531] usb 4-1.8: config 0 descriptor??
[ 12.881762] usb 1-13.1: USB disconnect, device number 6
[ 12.882014] usb 1-13.1.3: USB disconnect, device number 7
[ 13.019089] systemd[1]: Set hostname to
[ 13.408383] hub 1-13.1:1.0: USB hub found
[ 13.438228] hub 1-13.1:1.0: 4 ports detected
[ 13.750924] usb 1-13.1.3: new low-speed USB device number 9 using xhci_hcd
[ 13.872004] usb 1-13.1.3: New USB device found, idVendor=046d, idProduct=c012
[ 13.901980] usb 1-13.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.931573] usb 1-13.1.3: Product: USB-PS/2 Optical Mouse
[ 13.960743] usb 1-13.1.3: Manufacturer: Logitech
[ 13.989621] usb 1-13.1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 14.022856] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1.3/1-13.1.3:1.0/0003:046D:C012.0003/input/input12
[ 14.052808] hid-generic 0003:046D:C012.0003: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-13.1.3/input0
[ 14.146363] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
[ 14.174578] systemd[1]: Cannot add dependency job for unit cups.path, ignoring: Unit cups.path failed to load: No such file or directory.
[ 14.203136] systemd[1]: Cannot add dependency job for unit syslog-ng.service, ignoring: Unit syslog-ng.service failed to load: No such file or directory.
[ 14.232406] systemd[1]: Starting System Time Synchronized.
[ 14.290223] systemd[1]: Reached target System Time Synchronized.
[ 14.319392] systemd[1]: Expecting device dev-disk-by\x2duuid-01CF58B81B495050.device...
[ 14.378286] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 14.438182] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.468684] systemd[1]: Starting Root Slice.
[ 14.528900] systemd[1]: Created slice Root Slice.
[ 14.559049] systemd[1]: Starting User and Session Slice.
[ 14.619254] systemd[1]: Created slice User and Session Slice.
[ 14.649705] systemd[1]: Starting Journal Socket.
[ 14.710118] systemd[1]: Listening on Journal Socket.
[ 14.740428] systemd[1]: Starting udev Control Socket.
[ 14.800768] systemd[1]: Listening on udev Control Socket.
[ 14.830999] systemd[1]: Starting LVM2 metadata daemon socket.
[ 14.891471] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 14.921825] systemd[1]: Starting System Slice.
[ 14.982612] systemd[1]: Created slice System Slice.
[ 15.013297] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 15.076621] systemd[1]: Starting system-getty.slice.
[ 15.138182] systemd[1]: Created slice system-getty.slice.
[ 15.168600] systemd[1]: Starting Slices.
[ 15.228865] systemd[1]: Reached target Slices.
[ 15.276268] systemd[1]: Starting Load Kernel Modules...
[ 15.366201] systemd[1]: Mounting Temporary Directory...
[ 15.445718] systemd[1]: Starting Journal Audit Socket.
[ 15.506491] systemd[1]: Listening on Journal Audit Socket.
[ 15.536859] systemd[1]: Starting Swap.
[ 15.599309] systemd[1]: Reached target Swap.
[ 15.615144] xen_acpi_processor: Uploading Xen processor PM info
[ 15.661867] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 15.724102] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 15.773727] systemd[1]: Started Set Up Additional Binary Formats.
[ 15.804633] systemd[1]: Mounting Debug File System...
[ 15.867244] systemd[1]: Starting Delayed Shutdown Socket.
[ 15.930835] systemd[1]: Listening on Delayed Shutdown Socket.
[ 15.962785] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 16.026704] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 16.057512] systemd[1]: Starting udev Kernel Socket.
[ 16.116700] systemd[1]: Listening on udev Kernel Socket.
[ 16.145822] systemd[1]: Starting udev Coldplug all Devices...
[ 16.203271] systemd[1]: Expecting device dev-hvc0.device...
[ 16.259735] systemd[1]: Starting Journal Socket (/dev/log).
[ 16.317272] systemd[1]: Listening on Journal Socket (/dev/log).
[ 16.346410] systemd[1]: Starting Journal Service...
[ 16.402288] systemd[1]: Mounting POSIX Message Queue File System...
[ 16.458599] systemd[1]: Starting File System Check on Root Device...
[ 16.515802] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 16.572463] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 16.600334] systemd[1]: Starting Setup Virtual Console...
[ 16.657080] systemd[1]: Mounting Huge Pages File System...
[ 16.715379] systemd[1]: Starting Remote File Systems.
[ 16.773728] systemd[1]: Reached target Remote File Systems.
[ 16.773851] systemd[1]: Starting Encrypted Volumes.
[ 16.859951] systemd[1]: Reached target Encrypted Volumes.
[ 16.888474] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 16.917342] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 16.974381] systemd[1]: Mounted POSIX Message Queue File System.
[ 17.030574] systemd[1]: Mounted Huge Pages File System.
[ 17.087998] systemd[1]: Mounted Debug File System.
[ 17.145411] systemd[1]: Mounted Temporary Directory.
[ 17.203398] systemd[1]: Started Journal Service.
[ 17.660369] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[ 17.847995] systemd-journald[2190]: Received request to flush runtime journal from PID 1
[ 19.464698] ACPI: Battery Slot [BAT0](battery present)
[ 19.524829] ACPI: Battery Slot [BAT1](battery absent)
[ 19.586961] ACPI: AC Adapter AC
[ 19.662884] xen: registering gsi 18 triggering 0 polarity 1
[ 19.662936] Already setup the GSI :18
[ 19.689088] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.739391] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.785704] pps_core: LinuxPPS API ver. 1 registered
[ 19.811640] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 19.928197] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
[ 19.965175] PTP clock support registered
[ 19.991741] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
[ 20.018543] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
[ 20.045263] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
[ 20.071747] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
[ 20.098053] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
[ 20.111705] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 20.111822] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 20.112005] xen: registering gsi 20 triggering 0 polarity 1
[ 20.112082] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 20.112414] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 20.200229] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
[ 20.225984] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
[ 20.251824] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 20.268759] parport_pc 00:08: [io 0x0378-0x037b]
[ 20.268933] parport_pc 00:08: [io 0x0278-0x027b]
[ 20.269101] parport_pc 00:08: [io 0x03bc-0x03bf]
[ 20.269265] parport_pc 00:08: [io 0x0378-0x037b]
[ 20.269433] parport_pc 00:08: [irq 7]
[ 20.292906] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 20.318403] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:f4:bb:17:b1:56
[ 20.344002] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 20.370091] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 20.399702] xen: registering gsi 16 triggering 0 polarity 1
[ 20.399755] Already setup the GSI :16
[ 20.428722] xen: registering gsi 22 triggering 0 polarity 1
[ 20.428793] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 20.463776] parport_pc 00:08: activated
[ 20.497898] parport_pc 00:08: reported by Plug and Play ACPI
[ 20.522364] parport_pc 00:08: disabled
[ 20.546304] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[ 20.571411] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[ 20.595817] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[ 20.671333] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 20.701525] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 20.725156] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 20.748954] sound hdaudioC1D0: mono: mono_out=0x0
[ 20.772823] sound hdaudioC1D0: inputs:
[ 20.797094] sound hdaudioC1D0: Front Mic=0x18
[ 20.821112] sound hdaudioC1D0: Dock Mic=0x19
[ 20.844290] sound hdaudioC1D0: Headset Mic=0x1a
[ 20.867423] sound hdaudioC1D0: Internal Mic=0x12
[ 20.978922] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 21.067368] ppdev: user-space parallel port driver
[ 23.532633] iTCO_vendor_support: vendor-support=0
[ 23.620132] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.620323] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 23.620568] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 26.671064] ax88179_178a 1-13.2:1.0 eth1: register 'ax88179_178a' at usb-0000:00:14.0-13.2, ASIX AX88179 USB 3.0 Gigabit Ethernet, fc:8f:c4:0a:68:a7
[ 27.013580] ax88179_178a 2-6:1.0 eth2: register 'ax88179_178a' at usb-0000:00:14.0-6, ASIX AX88179 USB 3.0 Gigabit Ethernet, fc:8f:c4:0b:14:75
[ 27.042816] usbcore: registered new interface driver ax88179_178a
[ 27.072962] ax88179_178a 2-6:1.0 enp0s20u6: renamed from eth2
[ 27.103925] ax88179_178a 1-13.2:1.0 enp0s20u13u2: renamed from eth1
[ 31.026048] ax88179_178a 2-6:1.0 enp0s20u6: ax88179 - Link status is: 1
[ 32.818059] ax88179_178a 1-13.2:1.0 enp0s20u13u2: ax88179 - Link status is: 1
[ 33.059366] Ring-2 starts work for vgt-0
[ 33.066957] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (Blitter Command Streamer MI USER INTERRUPT)
[ 33.067190] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (Blitter Command Streamer MI USER INTERRUPT)
[ 33.312711] ------------[ cut here ]------------
[ 33.313020] WARNING: CPU: 0 PID: 1030 at fs/proc/generic.c:521 remove_proc_entry+0x128/0x140()
[ 33.313334] remove_proc_entry: removing non-empty directory 'fs/nfsfs', leaking at least 'volumes'
[ 33.313348] Modules linked in: ax88179_178a usbnet iTCO_wdt iTCO_vendor_support ppdev dcdbas coretemp snd_hda_codec_realtek snd_hda_codec_hdmi hwmon snd_hda_codec_generic x86_pkg_temp_thermal snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep parport_pc snd_pcm snd_timer snd soundcore e1000e serio_raw ptp microcode parport lpc_ich mfd_core pps_core shpchp i2c_i801 ac battery xen_acpi_processor xen_netback xen_blkback xen_gntalloc xen_gntdev autofs4 ext4 crc16 jbd2 mbcache ehci_pci sd_mod xhci_hcd ehci_hcd dm_snapshot dm_bufio dm_mod
[ 33.315519] CPU: 0 PID: 1030 Comm: kworker/u16:3 Not tainted 3.17.0-rc4-vgt+ #1
[ 33.315775] Hardware name: Dell Inc. Precision M4800/0FVDR2, BIOS A07 02/18/2014
[ 33.315794] Workqueue: netns cleanup_net
[ 33.315897] 0000000000000000 ffff8807d9487c80 ffffffff815756c9 ffff8807d9487cc8
[ 33.316139] ffff8807d9487cb8 ffffffff8105c317 ffffffff811937ae ffff8807e01ac480
[ 33.316383] ffffffff817df7f8 ffffffff817df7fb ffff8807db1113b0 ffff8807d9487d20
[ 33.316675] Call Trace:
[ 33.316845] [
l1viathan
I installed xengt on manjaro (ArchLinux). However, Windows 7 fails to boot after installing the intel driver (it just stays in the bootup screen). If I set vgt=0 I actually see the HD4600 in the device manager. I have a Core i7-4700HQ processor.