Open matthiasbock opened 8 years ago
$ openocd -c "set WORKAREASIZE 0;" -f openocd.cfg Open On-Chip Debugger 0.10.0-dev-g79fdeb3 (2015-08-10-22:55) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html 0 Info : FTDI SWD mode enabled Warn : Transport "swd" was already selected cortex_m reset_config sysresetreq adapter speed: 1000 kHz Info : clock speed 1000 kHz Info : SWD IDCODE 0x0bb11477 Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints Error: nrf51.cpu -- clearing lockup after double fault Polling target nrf51.cpu failed, trying to reexamine Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints Info : accepting 'gdb' connection on tcp/3333 Warn : Unknown device (HWID 0x00000058)
... happened with nRF51822-QFAA
$ openocd -c "set WORKAREASIZE 0;" -f openocd.cfg Open On-Chip Debugger 0.10.0-dev-g79fdeb3 (2015-08-10-22:55) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html 0 Info : FTDI SWD mode enabled Warn : Transport "swd" was already selected cortex_m reset_config sysresetreq adapter speed: 1000 kHz Info : clock speed 1000 kHz Info : SWD IDCODE 0x0bb11477 Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints Error: nrf51.cpu -- clearing lockup after double fault Polling target nrf51.cpu failed, trying to reexamine Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints Info : accepting 'gdb' connection on tcp/3333 Warn : Unknown device (HWID 0x00000058)... happened with nRF51822-QFAA