[BUG] - PFD Eratta

[Octal450]

Describe the bug

Several issues with the PFD that need correction

Expected behavior + evidence

• FD roll bar should not appear when AI does not (IRU not aligned)
• When IRU not aligned, the FMA displays incorrectly. ATS off box should be on the right. Also, the FMA should not be hidden.
• 250 appearing to the left of PITCH when no V2 speed is entered, it should be hidden while in takeoff phase without V2 speed as the AFS has no speed target.

Above 3 issues should be fixed like this image:

Here is the TFDi version, incorrect: (FD bar has been since fixed)

• Adjusting the airspeed pre-select causes an incorrect alignment of the bugs on the PFD (pic) (sel should not appear at the top of the tape there, if both bugs are parked, the pre-select bug wins (unless FMS spd is on and spd window is dashed)

TFDi bug: (altitude bug has been fixed)

V1.0.6: still present on speed bug

• The FMA pitch indications should not be left aligned unless approach indications (APPR ONLY, SINGLE/DUAL LAND) are visible. Correct layout shown in below image.
• PFD AI colors are too bright IN P3D ONLY, they should be closer to the below image, does not seem to be the case in MSFS.

Correct FMA, and AI colors (this image appears almost exactly like the full sim I was in)

TFDi incorrect pitch FMA, but correct AI colors (MSFS)

TFDi AI colors (P3D), these look like 717, not MD-11

And #1416 - incorrect V2 bug/FMA speed target indications after V2 entry

Newly reported as of 7/16: No diamond shown when level:

Real:

The FD dual cue bars are on top of the airplane symbol. They should be below:

Real:

The FD single cue V is above the airplane symbol. It should be below:

Real:

The drawing of the speed-on-thrust ATS off box and text alignment is wrong

Real:

Low + High speed protection doesn't flash alternatingly. Can't capture in a picture. They flash together. Instead they should alternate flashing.

Simulator

P3Dv4

Crash

No

Agreement

• [X] Yes

[Octal450]

I've added more issues and retested everything on 1.0.6 to reconfirm. Added the VSI diamond missing, the FD Z order, the ATS off box drawing, and the protection flashing.