turbofandude
commented
9 months ago This should be resolved by improvements in 0.30+
Closed sersanchez closed 9 months ago
turbofandude
commented
9 months ago This should be resolved by improvements in 0.30+
Describe the bug
The meatball commanding the descend does not update continuosly
Steps to reproduce
Start a descend. The meatball starts in the middle as expected, but as the plane descends, the meatball starts going up as if you needed to stop the descent, but when you reach the next waypoint, the meatball jumps to the bottom of the line, commanding you to drop the plane like a rock.
I tried using the profile descend and that seems to work, but is confusing if you are trying to monitor to reach the next waypoint as scheduled in the Flight Plan
Expected behaviour
The meatball should stay in the center of the descend line as you pass through all waypoints and update as you descend and get closer to the waypoint, giving you clues as if you need a steeper descend or need to use drag.
Evidence
No response
Simulator
Microsoft Flight Simulator 2020 (MSFS)
Crash
No
Phase of flight
Descent
Pitch
15 degrees
Bank
No bank
Heading
030
Altitude
from 37000 to 24000
Departure
KDFW
Arrival
KBOS
Cruise level
FL390
ZFW
373.0
CG
21.2
Fuel
17.0
Cost index
20
Route
KDFW/36R N0467F390 AKUNA9 MLC DCT KM36G DCT KENBE DCT VHP DCT DJB DCT JHW Q82 PONCT JFUND2 KBOS/22L
Location
PONCT
Agreement