Open Mesteriis opened 6 years ago
I am bit busy with cloud. I dont promise, that this will come soon.
Hi, I wanted to clarify enough information to add functionality. Or add something. I can also be a beta test
Das wäre echt der Hammer, wenn man die B1 direkt über den Adapter steuern könnte, freu. Wollte eben gerade die gewünschten Daten posten und siehe da, der Wunsch existiert schon.
Sonoff B1 logs
Command options Color Command | Payload | Description Color | 1 | Set color to Red Color | 2 | Set color to Green Color | 3 | Set color to Blue Color | 4 | Set color to Orange Color | 5 | Set color to Light Green Color | 6 | Set color to Light Blue Color | 7 | Set color to Amber Color | 8 | Set color to Cyan Color | 9 | Set color to Purple Color | 10 | Set color to Yellow Color | 11 | Set color to Pink Color | 12 | Set color to White
Command options CT
CT | | (Sonoff B1 and Led) Show current Color Temperature (153 = Cold, 500 = Warm) CT | 153..500 | (Sonoff B1 and Led) Set color temperature from cold to warm CT | + | Increment CT in 10 steps CT | - | Decrement CT in 10 steps
Command options Dimmer
Dimmer | | Show current dimmer setting from 0 to 100% Dimmer | 0..100 | Set dimmer value from 0 to 100% Dimmer | + | Increment brightness in 10 steps Dimmer | - | Decrement brightness in 10 steps
Command options Scheme Scheme | | Show current selected scheme Scheme | 0 | (default) Use a single color for all pixels in light/strip/ring Scheme | 1 | (= Wakeup) Start wake up sequence Scheme | 2 | Cycle through RGB colors using speed option Scheme | 3 | Cycle through RBG colors using speed option Scheme | 4 | Random cycle through colors using speed and fade options
Sonoff SC logs
Command options Altitude | | Show current Altitude to be used by calculating Sea level Pressure Altitude | -30000..30000 | Set local Altitude in meters AmpRes | | Show current Current Resolution AmpRes | 0..3 | Set Current Resolution Counter | | Show current Counter 1..4 value
Counter | 0 | Reset Counter 1..4
Counter | 1..64900 | Preset Counter 1..4
CounterDebounce | | Show current global Counter debounce time in mSec
CounterDebounce | 0 / off | Turn global Counter debounce off
CounterDebounce | 1..3200 | Set global Counter debounce in mSec
CounterType | | Show current Counter 1..4 type as pulse Counter or pulse Timer
CounterType | 0 / off | Set current Counter 1..4 type as pulse Counter
CounterType | 1 / on | Set current Counter 1..4 type as pulse Timer
EnergyRes | | Show current Energy Resolution
EnergyRes | 0..5 | Set Energy Resolution
HumRes | | Show current Humidity Resolution
HumRes | 0..3 | Set Humidity Resolution
Ina219Mode | | Show current Ina219 Calibration Mode
Ina219Mode | 0 | Set Ina219 Calibration to max 32V and 2A
Ina219Mode | 1 | Set Ina219 Calibration to max 32V and 1A
Ina219Mode | 2 | Set Ina219 Calibration to max 16V and 0.4A
PressRes | | Show current Pressure Resolution
PressRes | 0..3 | Set Pressure Resolution
SetOption8 | | Show current Temperature as either Celsius or Fahrenheit
SetOption8 | 0 / celsius | Set Temperature to Celsius
SetOption8 | 1 / fahrenheit | Set Temperature to Fahrenheit
SetOption18 | | Show Signal Light state - currently used with CO2 sensors only
SetOption18 | 0 / off | (default) Disable signal light
SetOption18 | 1 / on | Enable signal light
TempRes | | Show current Temperature Resolution
TempRes | 0..3 | Set Temperature Resolution
TempUnit | | Replaced by SetOption8
VoltRes | | Show current Voltage Resolution
VoltRes | 0..3 | Set Voltage Resolution
WattRes | | Show current Power Resolution
WattRes | 0..3 | Set Power Resolution
Link to tasmota wiki commands: https://github.com/arendst/Sonoff-Tasmota/wiki/Commands#ws2812-ailight-sonoff-led-b1-bn-sz01-h801-and-magichome