search

ioBroker / ioBroker.wolf

Connect WOLF heating, solar and domestic ventilation
MIT License
25 stars 16 forks source link

No data points get created after installation with 1.2.1 #47

Closed mirage-111 closed 2 years ago

mirage-111 commented 3 years ago

Fresh installation with 1.2.1 but no DataPoints get created. A hint from iobroker Forum was to use 1.2.0 but also with this Version no Data Points get created ISM8i

can you please help, thanks

imod89 commented 2 years ago

I have the same issue! is there a solution existing?

Apollon77 commented 2 years ago

Debug Log?

imod89 commented 2 years ago

image Good morning, thanks for fast response! Here is a log after restarting my instance. I didnt find a way to change or set ip adress?

Dark-Tower-Coder commented 2 years ago

I have the same problem. I tried the following versions: 1.2.0 1.2.1 1.3.2 I tried the whole thing once normally in raspbian and on the laptop in the Docker container.

The same behavior every time. The ISM8i shows that it is connected to the eBus and after a restart the green LED flashes. After a while, it just glows. As soon as the wolf adapter is deactivated, the red LED lights up. So correct behavior.

But no data points are created in the wolf adapter. I ask for your assistance.

Dark-Tower-Coder commented 2 years ago

The more I research, the more I suspect that it is due to the firmware of the module.

I have the following versions on my ISM8i module: HW version: 1.0 FW version: 1.70

Can it be because of that?

imod89 commented 2 years ago

I have the same setup...

iobroker on a raspi HW version: 1.0 FW version: 1.70

Did you find a solution in the meanwhile? Has somebody the adapter running with FW 1.70 of the ISM8i Module?

Sev7eNup commented 2 years ago

Same problem here. I also have 1.0 and 1.70. Every adapter version from 1.2.1 and higher does not work. Not datapoints are created or updated.

stale[bot] commented 2 years ago

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs within the next 7 days. Please check if the issue is still relevant in the most current version of the adapter and tell us. Also check that all relevant details, logs and reproduction steps are included and update them if needed. Thank you for your contributions. Dieses Problem wurde automatisch als veraltet markiert, da es in letzter Zeit keine Aktivitäten gab. Es wird geschlossen, wenn nicht innerhalb der nächsten 7 Tage weitere Aktivitäten stattfinden. Bitte überprüft, ob das Problem auch in der aktuellsten Version des Adapters noch relevant ist, und teilt uns dies mit. Überprüft auch, ob alle relevanten Details, Logs und Reproduktionsschritte enthalten sind bzw. aktualisiert diese. Vielen Dank für Eure Unterstützung.

Apollon77 commented 2 years ago

Please provide log from GitHub version ... please make sure to not choose the own IP in admin but 0.0.0.0