search

ioBroker / ioBroker.zigbee

Zigbee communcation with Hue, Xiaomi, Lighttify... via TI CC2xxx USB stick
MIT License
313 stars 190 forks source link

keine Geräte Aktualisierungen mehr möglich unter 1.8.10 #1658

Closed Twestus closed 1 year ago

Twestus commented 1 year ago

Moin, ich nutze die akteulle Version von 1.8.10 (heute von GIT installiert) und habe das Problem, dass er zwar für die Geräte Updates findet, die aber nicht installiert. Es kommt immer sofort die gleiche Meldung im Protokoll: "Update of '0x385b44fxxxxxxxxxx' failed (No new image available)". Egal welches Gerät, ob ein Ikea Treiber, LEDs, oder sonst welche. ioBroker läuft in einer VM. Node.js v16.19.0 NPM 8.19.3 js-controller 4.0.24 CPU, RAM, Speicherplatz alles genug frei Hatte vorher glaube ich die 1.7.5 des Adapters laufen und dort konnte ich Aktualisierungen installieren.

Hoffe ihr könnt mir weiterhelfen.

Edit: Versionen von Node,js, NPM & js-controller nach Update angepasst. Problem besteht weiterhin

Gittimmhub commented 1 year ago

so geht es mir auch. Ich versuche verzweifelt ein HUE Dimmer Switch anzulernen. Das Kuriose: er funktionierte ganz normal, bis ich am Rpi einen reboot durchgeführt hatte. ioBroker auf RPi 4b+8Gb 500Gb SSD Conbee2 an Verlängerungskabel USB2.0 Port Node.js: v16.18.1 NPM: 8.19.2 JS-Controller: 4.0.24

dp20eic commented 1 year ago

@Gittimmhub

Ich versuche verzweifelt ein HUE Dimmer Switch anzulernen.

Ein neues Gerät an den Koordinator, bei Dir Conbee2 anzulernen, ist aber ein anderes Problem als das was @Twestus hier aufgemacht hat.

So nun aber zum Thema. Ich habe auch das Problem, das mir neue Firmware, nach Auf Firmware Updates suchen geklickt habe, in den Kacheln angezeigt wird, sieh Bild1. grafik

Pfeil "A" zeigt neue Firmware an Pfeil "B" sagt nach wenigen Sekunden finished aber das Log sagt

zigbee.0 | 2023-02-02 12:01:12.113 | error | Update of '0x680ae2fffe3f5f58' failed (No new image available)
zigbee.0 | 2023-02-02 12:01:09.168 | info | Start firmware update for 0x680ae2fffe3f5f58

Instanz auf debug gestellt, neue Suche nach Firmwareupdate, Bild2 grafik

Neue Firmware wird angezeigt. Nach dem Klick auf Update, steht im Logfile:

2023-02-02 12:17:31.875  - error: zigbee.0 (10143) Update of '0x680ae2fffe3f5f58' failed (No new image available)

Hier mit den Einträgen davor und danach:

zigbee.0    2023-02-02 12:17:34.280 debug   handleMessage. {"type":"commandQueryNextImageRequest","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":6,"_type":"Router","_ieeeAddr":"0x680ae2fffe3f5f58","_networkAddress":4015,"_manufacturerID":4476,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":8,"inputClusters":[0,3,9,2821,4096],"outputClusters":[25,32,4096],"deviceNetworkAddress":4015,"deviceIeeeAddress":"0x680ae2fffe3f5f58","clusters":{"genBasic":{"attributes":{"modelId":"TRADFRI Signal Repeater","manufacturerName":"IKEA of Sweden","powerSource":1,"zclVersion":3,"appVersion":33,"stackVersion":98,"hwVersion":1,"dateCode":"20190311","swBuildId":"2.3.086"}}},"_binds":[{"cluster":0,"type":"endpoint","deviceIeeeAddress":"0x00124b001caa6f11","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[33],"outputClusters":[33],"deviceNetworkAddress":4015,"deviceIeeeAddress":"0x680ae2fffe3f5f58","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"IKEA of Sweden","_powerSource":"Mains (single phase)","_modelID":"TRADFRI Signal Repeater","_applicationVersion":33,"_stackVersion":98,"_zclVersion":3,"_hardwareVersion":1,"_dateCode":"20190311","_softwareBuildID":"2.3.086","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":2},"_lastSeen":1675336654280,"_defaultSendRequestWhen":"immediate","_linkquality":129},"endpoint":"[Circular]","data":{"fieldControl":1,"manufacturerCode":4476,"imageType":4354,"fileVersion":587753009},"linkquality":129,"groupID":0,"cluster":"genOta","meta":{"zclTransactionSequenceNumber":12,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":false,"reservedBits":0}}}
zigbee.0    2023-02-02 12:17:31.875 error   Update of '0x680ae2fffe3f5f58' failed (No new image available)
zigbee.0    2023-02-02 12:17:31.873 debug   getNewImage for '0x680ae2fffe3f5f58', meta {"fileVersion":587753009,"url":"http://fw.ota.homesmart.ikea.net/global/GW1.0/01.19.046/bin/10037603-3.1-TRADFRI-signal-repeater-2.3.086.ota.ota.signed"}
zigbee.0    2023-02-02 12:17:31.284 debug   No converter available for 'E1746' with cluster 'genOta' and type 'commandQueryNextImageRequest'
zigbee.0    2023-02-02 12:17:31.276 debug   Got OTA request '{"fieldControl":1,"manufacturerCode":4476,"imageType":4354,"fileVersion":587753009}'
zigbee.0    2023-02-02 12:17:31.276 debug   Type commandQueryNextImageRequest device {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":6,"_type":"Router","_ieeeAddr":"0x680ae2fffe3f5f58","_networkAddress":4015,"_manufacturerID":4476,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":8,"inputClusters":[0,3,9,2821,4096],"outputClusters":[25,32,4096],"deviceNetworkAddress":4015,"deviceIeeeAddress":"0x680ae2fffe3f5f58","clusters":{"genBasic":{"attributes":{"modelId":"TRADFRI Signal Repeater","manufacturerName":"IKEA of Sweden","powerSource":1,"zclVersion":3,"appVersion":33,"stackVersion":98,"hwVersion":1,"dateCode":"20190311","swBuildId":"2.3.086"}}},"_binds":[{"cluster":0,"type":"endpoint","deviceIeeeAddress":"0x00124b001caa6f11","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[33],"outputClusters":[33],"deviceNetworkAddress":4015,"deviceIeeeAddress":"0x680ae2fffe3f5f58","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"IKEA of Sweden","_powerSource":"Mains (single phase)","_modelID":"TRADFRI Signal Repeater","_applicationVersion":33,"_stackVersion":98,"_zclVersion":3,"_hardwareVersion":1,"_dateCode":"20190311","_softwareBuildID":"2.3.086","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":2},"_lastSeen":1675336651275,"_defaultSendRequestWhen":"immediate","_linkquality":129},"mapped":{"zigbeeModel":["TRADFRI signal repeater"],"model":"E1746","description":"TRADFRI signal repeater","vendor":"IKEA","fromZigbee":[{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]}],"ota":{},"exposes":[{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"options":[]},"name":"0x680ae2fffe3f5f58"} incoming event: {"type":"commandQueryNextImageRequest","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":6,"_type":"Router","_ieeeAddr":"0x680ae2fffe3f5f58","_networkAddress":4015,"_manufacturerID":4476,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":8,"inputClusters":[0,3,9,2821,4096],"outputClusters":[25,32,4096],"deviceNetworkAddress":4015,"deviceIeeeAddress":"0x680ae2fffe3f5f58","clusters":{"genBasic":{"attributes":{"modelId":"TRADFRI Signal Repeater","manufacturerName":"IKEA of Sweden","powerSource":1,"zclVersion":3,"appVersion":33,"stackVersion":98,"hwVersion":1,"dateCode":"20190311","swBuildId":"2.3.086"}}},"_binds":[{"cluster":0,"type":"endpoint","deviceIeeeAddress":"0x00124b001caa6f11","endpointID":1}],"_configuredReportings":[],"meta":{},"pendingRequests":[]},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[33],"outputClusters":[33],"deviceNetworkAddress":4015,"deviceIeeeAddress":"0x680ae2fffe3f5f58","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"IKEA of Sweden","_powerSource":"Mains (single phase)","_modelID":"TRADFRI Signal Repeater","_applicationVersion":33,"_stackVersion":98,"_zclVersion":3,"_hardwareVersion":1,"_dateCode":"20190311","_softwareBuildID":"2.3.086","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":2},"_lastSeen":1675336651275,"_defaultSendRequestWhen":"immediate","_linkquality":129},"endpoint":"[Circular]","data":{"fieldControl":1,"manufacturerCode":4476,"imageType":4354,"fileVersion":587753009},"linkquality":129,"groupID":0,"cluster":"genOta","meta":{"zclTransactionSequenceNumber":11,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":false,"reservedBits":0}}}

Es spielt keine Rolle welches Gerät ich auswähle, immer die gleichen Meldungen, das keine neue Firmware da ist.

Wenn weitere Informationen gebraucht werden, einfach sagen.

System: Info Plattform: linux Betriebssystem: linux Architektur: x64 CPUs: 4 Geschwindigkeit: 3200 MHz Modell: AMD Phenom(tm) II X4 955 Processor RAM: 3.5 GB System-Betriebszeit: 1 T. 00:09:42 Node.js: v16.19.0 time: 1675335320323 timeOffset: -60 Adapter-Anzahl: 558 NPM: 8.19.3 Datenträgergröße: 14.0 GB Freier Festplattenspeicher: 10.3 GB Betriebszeit: 1 T. 00:09:40 Aktive Instanzen: 23 Pfad: /opt/iobroker/ aktiv:

Adapter: ZigBee Installierte Instanzen: 1 Verfügbare Version: 1.8.10 Installierte Version: 1.8.10

asgothian commented 1 year ago

Bitte update auf die aktualisierte Version (am WE wurde aktualisiert) und verifizieren ob der Effekt noch da ist.

A.

dp20eic commented 1 year ago

Bitte update auf die aktualisierte Version (am WE wurde aktualisiert) und verifizieren ob der Effekt noch da ist.

A.

Moin, ich habe gerade über die Katze / von Github installiert, bei mir hat sich nichts geändert. Nach dem Suchen neuer Firmware, werden bei einigen Geräten neuerungen angezeigt, nach dem Klick auf Update, vergeht 1 sek fertig, im Log steht weiterhin

zigbee.0 | 2023-02-08 07:56:10.685 | error | Update of '0x680ae2fffe3f5f58' failed (No new image available)
zigbee.0 | 2023-02-08 07:56:07.729 | info | Start firmware update for 0x680ae2fffe3f5f58

VG Bernd

asgothian commented 1 year ago

Kannst du bitte nochmal die debug ausgaben von der neuen Version bereitstellen die du oben schon einmal ausgegeben hast ?

A.

dp20eic commented 1 year ago

Kannst du bitte nochmal die debug ausgaben von der neuen Version bereitstellen die du oben schon einmal ausgegeben hast ?

A.

Moin,

klar doch :)


2023-02-08 16:23:31.017  - debug: zigbee.0 (1351) Updating to latest '0x841826000007eb22' (Classic B40 TW - LIGHTIFY)
--
2023-02-08 16:23:31.018  - debug: zigbee.0 (1351) Using endpoint '3'
2023-02-08 16:23:31.060  - debug:  zigbee.0 (1351) handleMessage.  {"type":"commandQueryNextImageRequest","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":8,"_type":"Router","_ieeeAddr":"0x841826000007eb22","_networkAddress":33498,"_manufacturerID":48042,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":3,"profileID":49246,"deviceID":544,"inputClusters":[4096,0,3,4,5,6,8,768,64527],"outputClusters":[25],"deviceNetworkAddress":33498,"deviceIeeeAddress":"0x841826000007eb22","clusters":{"genBasic":{"attributes":{"modelId":"Classic  B40 TW -  LIGHTIFY","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":16,"stackVersion":2,"hwVersion":1,"dateCode":"20140331CNEF****","swBuildId":"V1.05.10"}},"genOnOff":{"attributes":{"onOff":0}},"genLevelCtrl":{"attributes":{"currentLevel":254}},"lightingColorCtrl":{"attributes":{"colorTemperature":153,"colorCapabilities":16,"colorTempPhysicalMin":153,"colorTempPhysicalMax":370,"colorMode":2}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"OSRAM","_powerSource":"Mains  (single phase)","_modelID":"Classic B40 TW -  LIGHTIFY","_applicationVersion":16,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331CNEF****","_softwareBuildID":"V1.05.10","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":2},"_lastSeen":1675869811060,"_defaultSendRequestWhen":"immediate","_linkquality":105},"endpoint":"[Circular]","data":{"fieldControl":0,"manufacturerCode":4364,"imageType":20,"fileVersion":16909584},"linkquality":105,"groupID":0,"cluster":"genOta","meta":{"zclTransactionSequenceNumber":141,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}}
2023-02-08 16:23:31.060  - debug:  zigbee.0 (1351) Received Zigbee message from '0x841826000007eb22', type  'commandQueryNextImageRequest', cluster 'genOta', data  '{"fieldControl":0,"manufacturerCode":4364,"imageType":20,"fileVersion":16909584}'  from endpoint 3 with groupID 0
2023-02-08 16:23:31.061  - debug:  zigbee.0 (1351) Type commandQueryNextImageRequest device  {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":8,"_type":"Router","_ieeeAddr":"0x841826000007eb22","_networkAddress":33498,"_manufacturerID":48042,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":3,"profileID":49246,"deviceID":544,"inputClusters":[4096,0,3,4,5,6,8,768,64527],"outputClusters":[25],"deviceNetworkAddress":33498,"deviceIeeeAddress":"0x841826000007eb22","clusters":{"genBasic":{"attributes":{"modelId":"Classic  B40 TW -  LIGHTIFY","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":16,"stackVersion":2,"hwVersion":1,"dateCode":"20140331CNEF****","swBuildId":"V1.05.10"}},"genOnOff":{"attributes":{"onOff":0}},"genLevelCtrl":{"attributes":{"currentLevel":254}},"lightingColorCtrl":{"attributes":{"colorTemperature":153,"colorCapabilities":16,"colorTempPhysicalMin":153,"colorTempPhysicalMax":370,"colorMode":2}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"OSRAM","_powerSource":"Mains  (single phase)","_modelID":"Classic B40 TW -  LIGHTIFY","_applicationVersion":16,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331CNEF****","_softwareBuildID":"V1.05.10","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":2},"_lastSeen":1675869811060,"_defaultSendRequestWhen":"immediate","_linkquality":105},"mapped":{"exposes":[{"type":"light","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","value_toggle":"TOGGLE","description":"On/off  state of this  light"},{"type":"numeric","name":"brightness","property":"brightness","access":7,"value_min":0,"value_max":254,"description":"Brightness  of this  light"},{"type":"numeric","name":"color_temp","property":"color_temp","access":7,"unit":"mired","value_min":150,"value_max":370,"description":"Color  temperature of this  light","presets":[{"name":"coolest","value":150,"description":"Coolest  temperature supported"},{"name":"cool","value":250,"description":"Cool  temperature (250 mireds / 4000  Kelvin)"},{"name":"neutral","value":370,"description":"Neutral  temperature (370 mireds / 2700  Kelvin)"},{"name":"warmest","value":370,"description":"Warmest  temperature  supported"}]}]},{"type":"enum","name":"effect","property":"effect","access":2,"values":["blink","breathe","okay","channel_change","finish_effect","stop_effect"],"description":"Triggers  an effect on the light (e.g. make light blink for a few  seconds)"},{"type":"enum","name":"power_on_behavior","property":"power_on_behavior","access":7,"values":["off","on","toggle","previous"],"description":"Controls  the behavior when the device is powered on after power  loss"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link  quality (signal  strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"lightingColorCtrl","type":["attributeReport","readResponse"],"options":[{"type":"binary","name":"color_sync","property":"color_sync","access":2,"value_on":true,"value_off":false,"description":"When  enabled colors will be synced, e.g. if the light supports both color  x/y and color temperature a conversion from color x/y to color  temperature will be done when setting the x/y color (default  true)."}]},{"cluster":"genOnOff","type":["attributeReport","readResponse"],"options":[{"type":"binary","name":"state_action","property":"state_action","access":2,"value_on":true,"value_off":false,"description":"State  actions will also be published as 'action' when true (default  false)."}]},{"cluster":"genLevelCtrl","type":["attributeReport","readResponse"]},{"cluster":"genLevelCtrl","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]},{"cluster":"genOnOff","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","brightness","brightness_percent","on_time"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls  the transition time (in seconds) of on/off, brightness, color  temperature (if applicable) and color (if applicable) changes. Defaults  to `0` (no  transition)."}]},{"key":["color_temp","color_temp_percent"],"options":[{"type":"binary","name":"color_sync","property":"color_sync","access":2,"value_on":true,"value_off":false,"description":"When  enabled colors will be synced, e.g. if the light supports both color  x/y and color temperature a conversion from color x/y to color  temperature will be done when setting the x/y color (default  true)."},{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls  the transition time (in seconds) of on/off, brightness, color  temperature (if applicable) and color (if applicable) changes. Defaults  to `0` (no  transition)."}]},{"key":["transition"],"attr":[]},{"key":["rate"],"attr":[]},{"key":["brightness_move","brightness_move_onoff"]},{"key":["colortemp_move","color_temp_move"]},{"key":["brightness_step","brightness_step_onoff"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls  the transition time (in seconds) of on/off, brightness, color  temperature (if applicable) and color (if applicable) changes. Defaults  to `0` (no  transition)."}]},{"key":["color_temp_step"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls  the transition time (in seconds) of on/off, brightness, color  temperature (if applicable) and color (if applicable) changes. Defaults  to `0` (no  transition)."}]},{"key":["level_config"]},{"key":["color_options"]},{"key":["color_mode"]},{"key":["effect","alert","flash"]},{"key":["power_on_behavior"]},{"key":["set_transition","remember_state","osram_set_transition","osram_remember_state"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"zigbeeModel":["Classic  B40 TW -  LIGHTIFY"],"model":"AB32840","vendor":"OSRAM","description":"LIGHTIFY  LED Classic B40 tunable  white","ota":{},"options":["[Circular]","[Circular]","[Circular]"]},"name":"0x841826000007eb22"}  incoming event:  {"type":"commandQueryNextImageRequest","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":8,"_type":"Router","_ieeeAddr":"0x841826000007eb22","_networkAddress":33498,"_manufacturerID":48042,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":3,"profileID":49246,"deviceID":544,"inputClusters":[4096,0,3,4,5,6,8,768,64527],"outputClusters":[25],"deviceNetworkAddress":33498,"deviceIeeeAddress":"0x841826000007eb22","clusters":{"genBasic":{"attributes":{"modelId":"Classic  B40 TW -  LIGHTIFY","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":16,"stackVersion":2,"hwVersion":1,"dateCode":"20140331CNEF****","swBuildId":"V1.05.10"}},"genOnOff":{"attributes":{"onOff":0}},"genLevelCtrl":{"attributes":{"currentLevel":254}},"lightingColorCtrl":{"attributes":{"colorTemperature":153,"colorCapabilities":16,"colorTempPhysicalMin":153,"colorTempPhysicalMax":370,"colorMode":2}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":[]}],"_manufacturerName":"OSRAM","_powerSource":"Mains  (single phase)","_modelID":"Classic B40 TW -  LIGHTIFY","_applicationVersion":16,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331CNEF****","_softwareBuildID":"V1.05.10","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":2},"_lastSeen":1675869811060,"_defaultSendRequestWhen":"immediate","_linkquality":105},"endpoint":"[Circular]","data":{"fieldControl":0,"manufacturerCode":4364,"imageType":20,"fileVersion":16909584},"linkquality":105,"groupID":0,"cluster":"genOta","meta":{"zclTransactionSequenceNumber":141,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}}
2023-02-08 16:23:31.061  - debug: zigbee.0 (1351) Got OTA request '{"fieldControl":0,"manufacturerCode":4364,"imageType":20,"fileVersion":16909584}'
2023-02-08 16:23:31.110  - debug: zigbee.0 (1351) No converter available for 'AB32840' with cluster 'genOta' and type 'commandQueryNextImageRequest'
2023-02-08 16:23:31.133  - debug:  zigbee.0 (1351) getNewImage for '0x841826000007eb22', meta  {"fileVersion":16909584,"fileSize":132928,"url":"https://api.update.ledvance.com/v1/zigbee/firmwares/download?company=4364&product=20&version=1.2.5.16","sha256":"609a1352b0bea23d58096b75d2d182e828cf4c2fafc780a78856fee9ce76953b"}
2023-02-08 16:23:31.135  - error: zigbee.0 (1351) Update of '0x841826000007eb22' failed (No new image available)
2023-02-08 16:23:32.262  - debug:  zigbee.0 (1351) Failed to execute routing table for  '0x00158d0002ffae0e'. "Error: AREQ - ZDO - mgmtRtgRsp after 10000ms\n     at Timeout._onTimeout  (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)\n     at listOnTimeout (node:internal/timers:559:17)\n    at processTimers  (node:internal/timers:502:7)"
2023-02-08 16:23:32.262  - debug:  zigbee.0 (1351) Routing for '0x00158d0002ffae0e':  {"neighbors":[{"linkquality":124,"networkAddress":19031,"ieeeAddr":"0x60a423fffee66ded","relationship":2,"depth":2},{"linkquality":4,"networkAddress":28513,"ieeeAddr":"0x84182600000aa57a","relationship":2,"depth":2},{"linkquality":73,"networkAddress":4015,"ieeeAddr":"0x680ae2fffe3f5f58","relationship":2,"depth":2},{"linkquality":49,"networkAddress":45010,"ieeeAddr":"0x0017880100f64377","relationship":2,"depth":2},{"linkquality":34,"networkAddress":11759,"ieeeAddr":"0x0017880106c0b23e","relationship":2,"depth":2},{"linkquality":0,"networkAddress":31046,"ieeeAddr":"0x0017880104ea2951","relationship":2,"depth":2},{"linkquality":27,"networkAddress":14123,"ieeeAddr":"0x841826000007f892","relationship":2,"depth":2},{"linkquality":108,"networkAddress":5001,"ieeeAddr":"0x60a423fffe3f590d","relationship":2,"depth":2},{"linkquality":157,"networkAddress":33498,"ieeeAddr":"0x841826000007eb22","relationship":2,"depth":2},{"linkquality":24,"networkAddress":34257,"ieeeAddr":"0xcc86ecfffe5d2c8c","relationship":2,"depth":2},{"linkquality":136,"networkAddress":58489,"ieeeAddr":"0x00158d0002f66138","relationship":2,"depth":2}]}
2023-02-08 16:23:32.262  - debug: zigbee.0 (1351) Routing table succeeded for '0x00158d0002ffae0e'

Ich kann auch gern noch ein anderes Device nutzen, da ich ja weiß, dass diese Osram Ka..e nicht gut ist, sind die letzten Überbleibsel.

Ein Hue LightStrp funktioniert wie gewohnt :) Alle Philips/Hue gehen, die Ikera Rollos auch, einzig die Signalverstärker von Ikea zeigen ein neues Firmware an aber finden dann keines.

Ich schalte mal zurück auf Info und teste dann alle gefundenen Updates durch.

VG Bernd

Edit: Leider passiert es sehr häufig, das der Upload abbricht.

zigbee.0 | 2023-02-08 17:20:13.536 | error | Update of '0x0017880106c0ba23' failed (Timeout: device did not request any image blocks)
zigbee.0 | 2023-02-08 17:17:17.341 | info | Update of '0x0017880106c0ba23' at 67.82%, +- 15 minutes remaining
zigbee.0 | 2023-02-08 17:16:47.057 | info | Update of '0x0017880106c0ba23' at 67.82%, +- 14 minutes remaining
arteck commented 1 year ago

hue geht grafik

arteck commented 1 year ago

check die GIT version.. habs gerade korrigiert

dp20eic commented 1 year ago

check die GIT version.. habs gerade korrigiert

Moin, habe den Adapter über die Katze aktualisiert. grafik

Alle Geräte, die ich letztens nicht Updaten konnte, zeigen mir jetzt an, das sie Aktuell sind grafik Die zwei haben schon immer angezeigt, das es kein neues Firmware gibt, scheint zustimmen grafik

Ich bin mir auch ganz Sicher, das ich letztens nicht alle Geräte aktualisiert habe, also die die gingen, es wird mir jetzt aber überall angezeigt, das sie up to date sind oder das es kein Firmware Update gibt. Bei den beiden weis ich, dass ich das Update nicht gemacht habe. grafik

Bin wieder zurück zur Version 1.8.10, überall wird angezeigt, dass es neue Firmware gibt, bis auf einige Ausnahmen, die aber schon immer sagen, dass es nichts neues gibt. grafik grafik

Das sind die Fehlermeldungen, mit Version 1.8.10, Geräte passen zum ersten Bild.

zigbee.0 | 2023-02-23 06:17:33.177 | error | Update of '0x841826000007e8ac' failed (No new image available)
zigbee.0 | 2023-02-23 06:17:32.974 | info | Start firmware update for 0x841826000007e8ac
zigbee.0 | 2023-02-23 06:17:29.708 | error | Update of '0x841826000007f892' failed (No new image available)
zigbee.0 | 2023-02-23 06:17:29.525 | info | Start firmware update for 0x841826000007f892
zigbee.0 | 2023-02-23 06:17:25.979 | error | Update of '0x841826000007eb22' failed (No new image available)
zigbee.0 | 2023-02-23 06:17:25.812 | info | Start firmware update for 0x841826000007eb22
zigbee.0 | 2023-02-23 06:17:00.785 | error | Update of '0x680ae2fffe3f5f58' failed (No new image available)
zigbee.0 | 2023-02-23 06:16:58.041 | info | Start firmware update for 0x680ae2fffe3f5f58

Ich lasse gerade ein Gerät updaten, das zweite Identische, schaue ich mir dann mit der Version 1.8.11 noch mal an. grafik

Passendes Log dazu

zigbee.0 | 2023-02-23 06:46:41.340 | info | Finished  update of '0x0017880104ea1d14', from  '{"softwareBuildID":"1.88.1","dateCode":"20210331"}' to  '{"softwareBuildID":"1.101.2","dateCode":"20221006"}'
zigbee.0 | 2023-02-23 06:46:40.158 | warn | Device '0x0017880104ea1d14' announced itself
zigbee.0 | 2023-02-23 06:45:16.783 | info | Update of '0x0017880104ea1d14' at 100%
zigbee.0 | 2023-02-23 06:45:01.312 | info | Update of '0x0017880104ea1d14' at 93.44%, +- 2 minutes remaining
zigbee.0 | 2023-02-23 06:44:31.306 | info | Update of '0x0017880104ea1d14' at 91.37%, +- 2 minutes remaining
...
...
zigbee.0 | 2023-02-23 06:23:43.392 | info | Update of '0x0017880104ea1d14' at 12.23%, +- 22 minutes remaining
zigbee.0 | 2023-02-23 06:23:13.377 | info | Update of '0x0017880104ea1d14' at 10.15%, +- 23 minutes remaining
zigbee.0 | 2023-02-23 06:22:43.126 | info | Update of '0x0017880104ea1d14' at 8.06%, +- 23 minutes remaining
zigbee.0 | 2023-02-23 06:22:12.937 | info | Update of '0x0017880104ea1d14' at 6.06%, +- 24 minutes remaining
zigbee.0 | 2023-02-23 06:21:42.736 | info | Update of '0x0017880104ea1d14' at 4.06%, +- 25 minutes remaining
zigbee.0 | 2023-02-23 06:21:12.601 | info | Update of '0x0017880104ea1d14' at 2.02%, +- 26 minutes remaining
zigbee.0 | 2023-02-23 06:20:42.570 | info | Update of '0x0017880104ea1d14' at 0%
zigbee.0 | 2023-02-23 06:20:39.575 | info | Start firmware update for 0x0017880104ea1d14

So zurück zur Version 1.8.11 obwohl ich gerade für eins der Gerät erfolgreich die Firmware aktualisiert habe, das linke im Bild, wird mir nach dem wechsel zur Version 1.8.11 das rechte Gerät als Aktuell angezeigt obwohl es oben ein Firmware Update gab. grafik

Warnings, die mit diesem Problem aber nichts zu tun haben

zigbee.0 | 2023-02-23 06:55:05.668 | warn | This object will not be created in future versions. Please report this to the developer.
zigbee.0 | 2023-02-23 06:55:05.668 | warn | Object 0017880100f64395.effect is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0 | 2023-02-23 06:55:05.578 | warn | This object will not be created in future versions. Please report this to the developer.
zigbee.0 | 2023-02-23 06:55:05.578 | warn | Object 0017880100f64895.effect is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0 | 2023-02-23 06:55:05.576 | warn | This object will not be created in future versions. Please report this to the developer.
zigbee.0 | 2023-02-23 06:55:05.576 | warn | Object 0017880100f64377.effect is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0 | 2023-02-23 06:55:03.980 | warn | download  icon from https://www.zigbee2mqtt.io/images/devices/HG06492B.jpg saved  into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/HG06492B.png
zigbee.0 | 2023-02-23 06:55:03.952 | warn | download  icon from https://www.zigbee2mqtt.io/images/devices/HG06492B.jpg saved  into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/HG06492B.png
zigbee.0 | 2023-02-23 06:55:03.939 | info | Zigbee started
dp20eic commented 1 year ago

Guten Morgen,

gibt es hierzu Neuigkeiten?

VG Bernd

arteck commented 1 year ago

gelöst in neuer Version