search

ioBroker / ioBroker.zwave

Legacy Z-Wave integration using OpenZWave
Other
24 stars 7 forks source link

Heiman motion sensor HS1MS-Z problem #103

Open Tomasz01 opened 4 years ago

Tomasz01 commented 4 years ago

I test Heiman Smart Motion Sensor, but I've a problem. Sensors is working, react for motion, but variable Binary Sensor / Sensor_1 is always FALSE. I test several pieces, they all behave the same. The sensor works, for example the sleep variable changes when it detects motion.

I use openzwave-1.6.994 with iobroker.zwave@1.6.3 (tested also 1.7.3), openzwave-shared@1.5.10 (tested also 1.5.7, 1.5.8)

Other devices z-wave works ok.

Log from tests. One device, clean install. OZW_Log.txt.zip

cburghardt commented 4 years ago

Regarding the log: which node and timestamp are you referring to? We will also need the corresponding iobroker log in debug mode for the z-wave adapter.

Tomasz01 commented 4 years ago

Sensor - Node2. How do I make the logs you need?

cburghardt commented 4 years ago

There is quite a lot in the log so I also need the timestamp. You can set the log level of the z-wave adapter to debug in the admin. Go to instances, enable the expert mode and change the log level.

MastegaDragons commented 3 years ago

I have the same problem :-(