Closed gaudes closed 4 years ago
Hi, same problem for me after updating on 1.6.3, with another wall switch (ZME_WALLC-S). Problem persists after updating on 1.7.1. Problem is already described in https://forum.iobroker.net/topic/26440/probleme-nach-zwave-update-mit-zme_wallc-s
regards, Andreas
If the adapter doesn't receive data from openzwave there is nothing we can do unfortunately
Hi,
it worked before the upgrade of openzwave.
Was this update required for other functionality in iobroker.zwave or is it possible to make a downgrade to the previous used version of openzwave ?
Regards, Ralf
Previous versions would use openzwave 1.4 which is not compatible with the current version. I would recommend to refresh the node (takes some time for battery devices) and check if the issue persists. If it does it is probably the best to check with openzwave directly. If the library passes on the information correctly it also works in the adapter. Central scenes definitely work for example with a Fibaro Keyfob.
I was opening an issue in openzwave: https://github.com/OpenZWave/open-zwave/issues/2020 maybe you want to describe your Problem too?
According to the openzwave folks this should be fixed in the latest version. In order to try you can do the following on the host which runs iobroker z-wave:
Stop the z-wave adapter
curl --connect-timeout 5 --retry 3 -L -O http://old.openzwave.com/downloads/openzwave-1.6.989.zip
unzip -o openzwave-1.6.989.zip && rm openzwave-1.6.989.zip
cd openzwave-1.6.989 && make && sudo make install
Depending on your environment:
sudo ldconfig
or
sudo ldconfig /usr/local/lib64
start z-wave adapter
grateful - it works for me; all states are present, thanks a lot
Hi, this should be also fixed in version 1.7.3 which is still not available in "Latest". Is it possible to publish this version ?
Thanks and regards, Ralf
@gaudes please share your repository settings in ioBroker. That version is indeed available for me in ioBroker.
I'm starting to believe you have old repositories configured. Please make sure you only have those two:
And also try to run "iobroker update" on command line nd pot. check for error messages
Hi,
repositories are correct configured. Here's the output of "iobroker update":
Used repository: latest
update done
Adapter "admin" : 3.7.2 , installed 3.6.12 [Updateable]
Adapter "alexa2" : 2.6.4 , installed 3.0.5
Adapter "alpha2" : 1.0.0
Adapter "amazon-dash" : 0.3.1
Adapter "artnet" : 1.0.0
Adapter "asterisk" : 1.0.6
Adapter "asuswrt" : 1.0.1
Adapter "b-control-em" : 0.2.1
Adapter "backitup" : 1.3.2
Adapter "beckhoff" : 1.1.0
Adapter "benq" : 0.2.0
Adapter "ble" : 0.10.1
Adapter "bmw" : 1.4.0
Adapter "boblight" : 0.0.1
Adapter "bosesoundtouch": 0.2.4
Adapter "botvac" : 1.0.0
Adapter "bring" : 1.6.6
Adapter "broadlink2" : 2.0.2
Adapter "bsblan" : 0.0.6
Adapter "bshb" : 0.0.14
Adapter "chromecast" : 2.3.1
Adapter "cloud" : 2.8.0 , installed 2.6.2 [Updateable]
Adapter "comfoair" : 0.3.2
Adapter "contactid" : 1.0.0
Adapter "corrently" : 0.0.2
Adapter "countdown" : 1.0.4
Adapter "cul" : 1.0.0
Adapter "daikin" : 1.0.5
Adapter "daswetter" : 2.8.1 , installed 2.8.1
Adapter "deconz" : 1.1.2
Adapter "denon" : 1.7.1
Adapter "devices" : 0.1.8
Adapter "discovergy" : 0.4.9
Adapter "discovery" : 2.0.0 , installed 1.3.0 [Updateable]
Adapter "doorbird" : 0.1.5
Adapter "ds18b20" : 1.1.0
Adapter "dwd" : 2.4.3 , installed 2.4.3
Adapter "ebus" : 0.8.2
Adapter "egigeozone" : 0.1.2
Adapter "ekey" : 1.1.0
Adapter "email" : 1.0.5 , installed 1.0.5
Adapter "emby" : 1.0.0
Adapter "energymanager" : 1.2.2
Adapter "enet" : 1.0.1
Adapter "epson_stylus_px830": 0.2.1
Adapter "fakeroku" : 0.2.1
Adapter "feiertage" : 1.0.11
Adapter "fhem" : 1.3.0
Adapter "find-my-iphone": 0.2.17
Adapter "firetv" : 0.0.33
Adapter "fitbit-api" : 0.1.1
Adapter "flot" : 1.9.2 , installed 1.9.2
Adapter "foobar2000" : 1.0.0
Adapter "fritzbox" : 0.2.1
Adapter "fritzdect" : 0.2.4
Adapter "fronius" : 1.0.5
Adapter "fullcalendar" : 0.2.4
Adapter "fullybrowser" : 1.0.1
Adapter "g-homa" : 0.5.1
Adapter "geofency" : 0.3.2
Adapter "gruenbeck" : 0.0.15
Adapter "habpanel" : 0.3.4
Adapter "haier" : 1.0.2
Adapter "ham" : 1.1.2 , installed 1.1.2
Adapter "ham-wemo" : 1.0.1
Adapter "harmony" : 1.2.2
Adapter "hass-mqtt" : 0.0.7
Adapter "heatingcontrol": 0.3.7 , installed 0.3.4 [Updateable]
Adapter "heytech" : 0.1.9
Adapter "hid" : 0.1.17
Adapter "hilink" : 0.2.7
Adapter "history" : 1.8.7 , installed 1.8.6 [Updateable]
Adapter "hm-rega" : 2.5.0
Adapter "hm-rpc" : 1.12.1
Adapter "hmip" : 0.0.11
Adapter "hombot" : 0.1.3
Adapter "homeconnect" : 0.0.26
Adapter "homee" : 0.3.1
Adapter "homepilot" : 1.0.3
Adapter "hp-ilo" : 1.0.5
Adapter "hs100" : 1.0.10
Adapter "hue" : 2.4.6
Adapter "hue-extended" : 1.1.7
Adapter "hyperion" : 0.0.9
Adapter "i2c" : 0.0.6
Adapter "ical" : 1.7.0 , installed 1.7.0
Adapter "icons-addictive-flavour-png": 0.1.0
Adapter "icons-fatcow-hosting": 0.1.0 , installed 0.1.0
Adapter "icons-icons8" : 0.0.1
Adapter "icons-material-png": 0.1.0 , installed 0.1.0
Adapter "icons-material-svg": 0.1.0
Adapter "icons-mfd-png" : 1.0.2 , installed 1.0.2
Adapter "icons-mfd-svg" : 1.0.2
Adapter "icons-open-icon-library-png": 0.1.3
Adapter "icons-ultimate-png": 1.0.1
Adapter "influxdb" : 1.6.3
Adapter "info" : 1.5.7 , installed 1.5.6 [Updateable]
Adapter "innogy-smarthome": 0.3.3
Adapter "intesishome" : 0.1.2
Adapter "iogo" : 0.4.17
Adapter "iot" : 1.1.9 , installed 1.1.8 [Updateable]
Adapter "iqontrol" : 0.2.14
Adapter "javascript" : 4.3.4 , installed 4.1.12 [Updateable]
Adapter "jeelink" : 0.1.3
Controller "js-controller" : 2.1.1 , installed 2.1.1
Adapter "js2fs" : 0.1.5
Adapter "kecontact" : 0.1.0
Adapter "klf200" : 0.9.5
Adapter "km200" : 2.0.3
Adapter "knmi-weather" : 0.1.1
Adapter "knx" : 1.0.36
Adapter "kodi" : 1.0.0
Adapter "kress" : 2.5.5
Adapter "lametric" : 0.0.6
Adapter "landroid" : 1.0.3
Adapter "lcn" : 0.6.2
Adapter "letrika_comgw" : 0.0.4
Adapter "lgtv" : 1.1.2
Adapter "lgtv-rs" : 0.0.4
Adapter "lgtv11" : 1.0.5
Adapter "lifx" : 0.1.0
Adapter "lightify" : 0.2.16
Adapter "link" : 0.5.8
Adapter "linkeddevices" : 1.1.0
Adapter "lovelace" : 1.0.6
Adapter "loxone" : 1.0.0
Adapter "luftdaten" : 0.0.9
Adapter "lupusec" : 1.2.0
Adapter "luxtronik1" : 0.1.0
Adapter "material" : 0.12.1
Adapter "maxcube" : 0.1.2
Adapter "maxcul" : 1.1.2
Adapter "mbus" : 2.0.0
Adapter "mclighting" : 0.0.12
Adapter "megad" : 1.2.1
Adapter "megadd" : 0.2.0
Adapter "megaesp" : 0.1.0
Adapter "mercedesme" : 0.0.18
Adapter "meross" : 1.3.8
Adapter "meteoalarm" : 1.0.8
Adapter "miele" : 0.1.5
Adapter "mihome" : 1.2.8
Adapter "mihome-airpurifier": 0.0.6
Adapter "mihome-lamp" : 1.1.0
Adapter "mihome-plug" : 0.2.0
Adapter "mihome-vacuum" : 1.1.5
Adapter "miio" : 0.0.13
Adapter "mikrotik" : 1.0.4
Adapter "milight" : 0.3.6
Adapter "milight-smart-light": 0.2.7
Adapter "mobile" : 0.5.0 , installed 0.5.0
Adapter "modbus" : 3.0.0
Adapter "moma" : 1.2.3
Adapter "mpd" : 1.0.2
Adapter "mqtt" : 2.1.1
Adapter "mqtt-client" : 1.2.1
Adapter "multicast" : 0.1.1
Adapter "musiccast" : 0.1.2
Adapter "mysensors" : 2.0.0
Adapter "nanoleaf-lightpanels": 0.8.2
Adapter "nello" : 2.0.8
Adapter "netatmo" : 1.3.1 , installed 1.3.1
Adapter "nibeuplink" : 0.3.0
Adapter "nina" : 0.0.14
Adapter "node-red" : 1.13.0 , installed 1.13.0
Adapter "nuki" : 1.1.2
Adapter "nuki-extended" : 2.0.3
Adapter "nut" : 1.1.3
Adapter "odl" : 1.0.1
Adapter "oilfox" : 2.1.0
Adapter "onkyo" : 2.0.3
Adapter "onvif" : 0.0.2
Adapter "openhab" : 1.1.0
Adapter "opentherm" : 0.1.9
Adapter "openweathermap": 0.1.0
Adapter "opi" : 0.1.1
Adapter "oppoplayer" : 0.2.1
Adapter "owfs" : 0.6.1
Adapter "owntracks" : 0.6.2
Adapter "panasonic-viera": 1.0.2
Adapter "parser" : 1.0.7
Adapter "paw" : 0.3.2
Adapter "phantomjs" : 1.0.1
Adapter "pi-hole" : 1.2.2
Adapter "piface" : 1.0.0
Adapter "pimatic" : 0.1.5
Adapter "ping" : 1.3.2 , installed 1.3.2
Adapter "places" : 0.7.0
Adapter "plex" : 0.8.8
Adapter "plexconnect" : 0.0.7
Adapter "pollenflug" : 1.0.4
Adapter "primelab" : 1.0.2
Adapter "proxmox" : 0.5.1
Adapter "proxy" : 1.1.1
Adapter "pushbullet" : 0.0.11
Adapter "pushover" : 1.1.1 , installed 1.1.1
Adapter "pushsafer" : 0.1.8
Adapter "radar2" : 1.0.9
Adapter "radiohead" : 1.0.2
Adapter "rflink" : 2.0.0
Adapter "rickshaw" : 1.0.0
Adapter "ring" : 1.0.5
Adapter "roadtraffic" : 0.1.0
Adapter "roomba" : 1.0.7
Adapter "rpi2" : 1.1.1
Adapter "s7" : 1.1.4
Adapter "samsung" : 0.2.9
Adapter "sayit" : 1.8.2
Adapter "sbfspot" : 2.3.4
Adapter "scenes" : 1.1.0 , installed 1.1.0
Adapter "schoolfree" : 0.3.1
Adapter "shelly" : 3.1.1
Adapter "shuttercontrol": 0.4.1
Adapter "sia" : 1.0.4
Adapter "siegenia" : 1.0.0
Adapter "simple-api" : 2.3.2 , installed 2.3.2
Adapter "sma-em" : 0.5.6
Adapter "smappee" : 0.2.2
Adapter "smartmeter" : 3.0.6
Adapter "snips" : 1.5.0
Adapter "snmp" : 0.5.0
Adapter "socketio" : 2.1.2 , installed 2.1.2
Adapter "solarlog" : 1.0.0
Adapter "solarwetter" : 1.0.0
Adapter "sonnen" : 1.3.0
Adapter "sonoff" : 2.3.3
Adapter "sonos" : 2.0.1
Adapter "sonus" : 0.1.1
Adapter "sony-bravia" : 1.0.1
Adapter "sourceanalytix": 0.2.5 , installed 0.2.5
Adapter "spotify-premium": 1.0.0
Adapter "sql" : 1.9.5
Adapter "squeezebox" : 1.0.0
Adapter "squeezeboxrpc" : 0.8.22
Adapter "starline" : 1.0.0
Adapter "statistics" : 0.2.2
Adapter "stiebel-isg" : 1.4.10
Adapter "stockmarket" : 0.0.2
Adapter "synology" : 0.0.4
Adapter "systeminfo" : 0.3.1 , installed 0.3.1
Adapter "tado" : 0.1.3
Adapter "tankerkoenig" : 2.0.6 , installed 2.0.5 [Updateable]
Adapter "telegram" : 1.4.5 , installed 1.4.3 [Updateable]
Adapter "terminal" : 0.1.2
Adapter "text2command" : 1.3.0
Adapter "tileboard" : 0.1.1
Adapter "tinker" : 0.1.4
Adapter "tino" : 0.1.1
Adapter "tinyrx4" : 0.1.4
Adapter "tr-064" : 0.4.18
Adapter "tradfri" : 2.4.7 , installed 2.4.7
Adapter "tunnelbroker-endpoint-updater": 0.0.1
Adapter "tuya" : 3.1.12
Adapter "tvspielfilm" : 1.0.4
Adapter "unifi" : 0.3.1
Adapter "upnp" : 1.0.14 , installed 1.0.11 [Updateable]
Adapter "valloxmv" : 1.0.0
Adapter "vcard" : 0.0.9
Adapter "vedirect" : 0.1.0
Adapter "viessmann" : 1.2.3
Adapter "viessmannapi" : 1.3.2
Adapter "virtualpowermeter": 1.0.1
Adapter "vis" : 1.2.2 , installed 1.2.2
Adapter "vis-bars" : 0.1.4
Adapter "vis-canvas-gauges": 0.1.5
Adapter "vis-colorpicker": 1.1.1 , installed 1.1.1
Adapter "vis-fancyswitch": 1.1.0
Adapter "vis-google-fonts": 0.1.0
Adapter "vis-history" : 1.0.0 , installed 1.0.0
Adapter "vis-hqwidgets" : 1.1.3 , installed 1.1.3
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-justgage" : 1.0.2 , installed 1.0.2
Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2
Adapter "vis-lcars" : 1.0.4
Adapter "vis-map" : 1.0.2
Adapter "vis-material" : 0.1.3
Adapter "vis-materialdesign": 0.2.7 , installed 0.1.5 [Updateable]
Adapter "vis-metro" : 1.1.2 , installed 1.1.2
Adapter "vis-players" : 0.1.5
Adapter "vis-plumb" : 1.0.2
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "vis-timeandweather": 1.1.7 , installed 1.1.7
Adapter "vis-weather" : 2.5.1 , installed 2.5.2
Adapter "vr200" : 1.0.0
Adapter "weatherunderground": 3.1.6
Adapter "web" : 2.4.10 , installed 2.4.10
Adapter "weishaupt-wem" : 0.0.7
Adapter "wetty" : 0.1.1
Adapter "wiffi-wz" : 2.1.4
Adapter "wifilight" : 0.2.0
Adapter "wlanthermo-nano": 0.1.1
Adapter "wm-bus" : 0.3.1
Adapter "wolf" : 0.9.2
Adapter "worx" : 1.0.0
Adapter "xbox" : 0.5.11
Adapter "xs1" : 1.0.2
Adapter "yahka" : 0.9.2 , installed 0.9.2
Adapter "yamaha" : 0.3.19
Adapter "yeelight-2" : 1.0.3
Adapter "youtube" : 0.0.2
Adapter "yr" : 2.0.3
Adapter "zigbee" : 0.11.5
Adapter "zoneminder" : 0.3.3
Adapter "zont" : 0.5.3
Adapter "zwave" : 1.7.2 , installed 1.7.2
Adapter "zwave2" : 0.3.4
root@iobroker:/opt/iobroker#
And here's the screenshot of repository settings:
Regards, Ralf
Wow, that list is really out of date. We need to check what's going on here, but in the meantime you can manually update zwave:
cd /opt/iobroker
npm i iobroker.zwave
iobroker upload zwave
By the way, what's your js-controller version?
iobroker -v
OK, manual update worked, version is now 1.7.3
But the problem still exists:
2020-01-08 11:22:06.410 Detail, Node012, Received: 0x01, 0x0d, 0x00, 0x04, 0x00, 0x0c, 0x05, 0x5b, 0x03, 0xf8, 0x00, 0x02, 0xc1, 0x00, 0x9c
2020-01-08 11:22:06.410 Info, Node012, Received Central Scene set from node 12: scene id=2 with key Attribute 0. Sending event notification.
2020-01-08 11:22:06.410 Warning, Node012, No ValueID created for Scene 2
2020-01-08 11:22:06.410 Warning, Node012, CommandClass COMMAND_CLASS_CENTRAL_SCENE HandlerMsg Returned False
What I've done also:
Shown version from iobroker -v
is 2.1.1
Wegen dem alten Repo: Versuch mal bitte das Repo auf Stable zu switchen, dann update laufen lassen. wird es dann aktualisiert? ggf danach mal auf latest zurückswitchen
Ich switche dauernd hin und her, da ich in der Regel immer Stable verwende und nur für ZWave momentan auf Latest schalte. Ich habe jetzt nochmal "Default" eingestellt, dann auf der iobroker update
ausgeführt, dann wieder auf "Latest" gewechselt und nochmal iobroker update
ausgeführt. Keine Änderung, letzte verfügbare Version wird als 1.7.2 angezeigt:
Adapter "zwave" : 1.7.2 , installed 1.7.3
Hi zusammen,
mein Funkschalter ist wohl defekt. Ich hatte noch einen Zweiten rumliegen, mit dem funktioniert es nun.
Danke und GRuss Ralf
Hi,
sorry, me again. The Devolo wall switch stopped working.
Currently I'm using version 1.6.3.
When pressing buttons, nothing is logged in the events in ioBroker. OZW_log.txt still reports: