Open jepunband opened 6 months ago
This repo is specific to the defcon31-ducky project. The board for this project has switches on the carrier pcb.
Hi any idea what switch that i could use for the Pico so i can solder it to the pin 1 and 2 sow i do not have to use the jump cable to go to setup mode ..etc. It will be easier to toggle on and off with a switch. If you have tried this way maybe can recommend a switch that works...
hi @dbisu , i followed your link from pico-ducky github. I need to understand on what you meant by this :
" To prevent payloads from running by default on boot, set SW1 to ON." and "to have the Pico W show up on the host computer as a USB Mass Storage device, set SW2 to ON.".
How are you toggling between this? are you using some sort of switch/button on the pico pi w.