Hi! Appreciate you guys for making this. I just did a first install on one of our many new Gardyns. It may be worth adding a note to the README after flashing to go into raspi-config and make sure the I2C module is enabled - it was off in my Rasbian Lite by default and took me a while to figure why the sensors weren't connecting. Also the individual app .py scripts for lights and pump only work for a second or so, unless I disable the MQTT service. Might be good to add that disable service command too for folks that just want to use cron and not the web or MQTT interface :) Thanks!
Hi! Appreciate you guys for making this. I just did a first install on one of our many new Gardyns. It may be worth adding a note to the README after flashing to go into raspi-config and make sure the I2C module is enabled - it was off in my Rasbian Lite by default and took me a while to figure why the sensors weren't connecting. Also the individual app .py scripts for lights and pump only work for a second or so, unless I disable the MQTT service. Might be good to add that disable service command too for folks that just want to use cron and not the web or MQTT interface :) Thanks!